RE: upgrading my LIBHTTP... symbol exports

[Gerald Magnuson <gmagnuson@xxxxxxxxxxxxx>]

I do see that, but that message is saying my conflicts are between
EXPAT / HTTPAPI in LIBHTTP and EXPAT / HTTPAPI in LIBHTTP.24

My binding directory only has modules, and it doesn't have those service programs in it...
Some of my old modules reference the binding directory HTTPAPI in the old LIBHTTP, but the
New modules I am re-compiling reference HTTPAPI in LIBHTTP.24 


My actual plan is to change a module to use the new LIBHTTP.24, recompile the programs above 
The module (in a test library) and test...  then roll out when tested...

I didn't want to have to re-compile, test, and roll out all the programs that use HTTPAPI...




-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of thomas.raddatz@xxxxxx
Sent: Wednesday, May 29, 2013 12:10 AM
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: upgrading my LIBHTTP... symbol exports


The second level help text of message CPD5D03 shows the conflicting modules/service programs. After DSPJOBLOG, put your cursor on the message and press F1 to see the additional message information:

From QCPFMSG:

                         Display Formatted Message Text
                                                             System: 
GFD400
 Message ID . . . . . . . . . :   CPD5D03
 Message file . . . . . . . . :   QCPFMSG
   Library  . . . . . . . . . :     QSYS2924

 Message . . . . :   Definition supplied multiple times for symbol '&8'.
 Cause . . . . . :   Definition &1 was found to be exported from both &2 
object
   &3 in library &4 and &5 object &6 in library &7.
 Recovery  . . . :   Try the Create Program (CRTPGM) or Create Service 
Program
   (CRTSRVPGM) command again, supplying only one of these objects, or try the
   CRTPGM or CRTSRVPGM command again, specifying one or both of
OPTION(*DUPVAR)
   and OPTION(*DUPPROC).






 Bottom
 Press Enter to continue.

 F3=Exit   F11=Display unformatted message text   F12=Cancel


Thomas.


ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 28.05.2013 17:26:20:

> Von: gmagnuson@xxxxxxxxxxxxx
> An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
> Datum: 28.05.2013 17:35
> Betreff: upgrading my LIBHTTP... symbol exports Gesendet von: 
> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> 
> I am having trouble getting my LIBHTTP upgraded...
> 
> I have placed the EXPAT and HTTPAPI *SRVPGM's in a new library,
LIBHTTP.24
> 
> I am starting re-compiling my modules, and programs, and am getting a
CPD5D03-
> Definition supplied multiple times for symbol...
> 
> I have "one big ole binding directory"...  to do this upgrade, do I 
> need to reference a new binding directory, With just the new stuff?
> 
> I tried to order my new modules just before each of the old modules, 
> but I still get the CPD5D03 error...
> 
> I have found that this symptom effects all programs that use the 
> binding directory (all of them fail to compile due To the CPD5D03 
> error)...
> 
> I am sure this problem is because how I implemented the API, but I 
> don't know how to move forward.
> Any ideas would be greatly appreciated...
> 
> 
> 
> ----------------------------------------------------------------------
> - This is the FTPAPI mailing list.  To unsubscribe, please go to:
> http://www.scottklement.com/mailman/listinfo/ftpapi
> ----------------------------------------------------------------------
> -


--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the intended recipient only. Access, disclosure, copying, distribution, or reliance on any of it by anyone else is prohibited and may be a criminal offence. Please delete if obtained in error and email confirmation to the sender.
-----------------------------------------------------------------------
This is the FTPAPI mailing list.  To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------