Thanks Thomas!! FINALLY I was able to create the wrapper and was successfully able to test it. Also I tried to generate a test/example program using WSDL2RPG and too worked.
Again Thanks a lot for all your inputs.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of thomas.raddatz@xxxxxx
Sent: Tuesday, September 10, 2013 4:14 AM
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Subject: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart (Stmt: 231000) : Type must be 'anyType'..
Gaurav,
The reason for the RNF3749 is that you did not completely commented yourQueryCARS prototype:
D*QueryCARS...
D*QueryCARS PR extproc('CARSSOAP11Port_QueryCARS')
D* likeds(mx_QueryCARSResponse_t)
D*
D* i_mx_QueryCARS...
D* likeds(mx_QueryCARSType_t)
/IF NOT DEFINED(NO_CONST_ON_INPUT_PARAMETERS)
D const
/ENDIF
D o_msg like(wsdl_errText_t )
Please add the asterix to the "const" line and the "o_msg" line orcompletely remove the prototype. If you want to rename the web serviceoperation, open member WSMAXIMO03 and rename the prototype and theprocdure interface of the CARSSOAP11Port_QueryCARS operation to"QueryCARS". As a site note, I would keep the external name (
CARSSOAP11Port_QueryCARS) in order to keep the naming konvention (portname + operation name):
Before:
-------
D CARSSOAP11Port_QueryCARS...
D PR likeds(mx_QueryCARSResponse_t)
D extproc('CARSSOAP11Port_QueryCARS')
D i_mx_QueryCARS...
D likeds(mx_QueryCARSType_t)
/IF NOT DEFINED(NO_CONST_ON_INPUT_PARAMETERS)
D const
/ENDIF
D o_msg like(wsdl_errText_t )
Renamed:
--------
D QueryCARS...
D PR likeds(mx_QueryCARSResponse_t)
D extproc('CARSSOAP11Port_QueryCARS')
D i_mx_QueryCARS...
D likeds(mx_QueryCARSType_t)
/IF NOT DEFINED(NO_CONST_ON_INPUT_PARAMETERS)
D const
/ENDIF
D o_msg like(wsdl_errText_t )
On the other hand I do not know whether or not it is a good idea to renamethe web service operation, because this way you get inconsitent nameswhich may confuse the other developers:
CARSSOAP11Port_Port_setHttpDebug(*ON: 'debug.log');
CARSSOAP11Port_Port_setHttpProxy('your.proxy.server': 8080);
QueryCARSResponse = QueryCARS(QueryCARSRequest: msg);
// QueryCARS may not be recogniced as related to // CARSSOAP11Port_Port_setHttpDebug and // CARSSOAP11Port_Port_setHttpProxy
versus:
CARSSOAP11Port_Port_setHttpDebug(*ON: 'debug.log');
CARSSOAP11Port_Port_setHttpProxy('your.proxy.server': 8080);
QueryCARSResponse = CARSSOAP11Port_QueryCARS(QueryCARSRequest: msg);
// In this example it is clear that all 3 procedures
// are related.
The RNF5406 error indicates that you did not pass all parameters to theweb service procedure. In fact the second parameter "msg" is missing:
mx_QueryCARSResponse_t = CARSSOAP11Port_QueryCARS
(mx_QueryCARSType_t);
The correct procedure call is:
mx_QueryCARSResponse_t = CARSSOAP11Port_QueryCARS
(mx_QueryCARSType_t: msg);
Again, please do not try to use the template fields. All these fields arebased on pointer "pDummy" which is never set. Please define your ownfields like this:
D QueryCARSResponse...
D DS Likeds(mx_QueryCARSResponse_t) inz
D QueryCARSRequest...
D DS Likeds(mx_QueryCARSType_t) inz
D msg S Like(wsdl_errText_t) inz
QueryCARSResponse = CARSSOAP11Port_QueryCARS
(QueryCARSRequest: msg);
Did you already notice that you can generate a test/example program? Thetest program shows how to use the template fields and how to call the webservice operation. FAQ "How to create a test program" is a good startingpoint.
Regards,
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 09.09.2013 22:21:18:
Von: gaurav.gupta3@xxxxxx
An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,> Datum: 09.09.2013 23:02
Betreff: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart> (Stmt: 231000) : Type must be 'anyType'..
Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
Hi Thomas,
Thanks for the input.. I was able to move forward and resolved lot> of errors. As of now I am stuck at a point where the compilation is> failing due to below two errors -
· *RNF3749 20 1 Keyword is not allowed for a prototype> definition; keyword ignored.
· *RNF5406 30 1 The call passed fewer parameters than> the prototype indicates are required.
I guess I am unable to figure out the correct syntax of how to> invoke the procedure of WSMAXIMO03 from my wrapper. Can you provide> some inputs on the same. Attached is the source code for wrapper ,> compilation error log & WSMAXIMO03.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of thomas.raddatz@xxxxxx
Sent: Monday, September 09, 2013 3:33 AM
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Subject: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart> (Stmt: 231000) : Type must be 'anyType'..
Gaurav,
The first thing you need to remember is that all fields ending with> "_t"are template fields. These fields are intended to be used to> define theactual fields with LIKE or LIKEDS.
Therefore the following statement are wrong:
mx_QueryCARSType_t.CARCONTROL =
%trim(%editc(CRCON#:'Z'));
Error: mx_QueryCARSType_t is a template fields which can not
contain
datadue to the "based(pDummy)" keyword.
Solution: Define your own file "QueryCARSType" using the template field:
D QueryCARSType...
D DS likeds(mx_QueryCARSType_t)
D inz
D QueryCARSResponseType...
D DS likeds(mx_QueryCARSResponseType_t)
D inz
Then change your code to:
QueryCARSType.CARCONTROL =
%trim(%editc(CRCON#:'Z'));
CallP
CARSSOAP11Port_QueryCARS
(QueryCARSType:
QueryCARSResponse);
Of course you should also enable the following statements in order> to callthe web service stub procedure:
003300 *DEFINE PROTOTYPE_WSMAXIMO03
003400 *COPY WSMAXIMO,WSMAXIMO03
003500 *UNDEFINE PROTOTYPE_WSMAXIMO03
There is no need to copy each and everything (prototypes and> definitions)from WSMAXIMO03 to WSMXWRPR.
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx> schrieb am 06.09.2013 20:16:15:
Von: gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
An:
ftpapi@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi@xxxxxxxxxxxxxxxxxxxxxx
,> Datum: 06.09.2013 20:25
Betreff: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart>> (Stmt: 231000) : Type must be 'anyType'..
Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx>
HI Thomas/Mike,
As of I am trying to create a wrapper around the stubs generated
but struggling to get it compile. Attached are source codes for the>> wrapper and the web services stubs along with log of compilation>> error which I am getting for Reference. Request your inputs in>> troubleshooting the problem .
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>>> 161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: Gupta, Gaurav (GE Capital, non-ge)> Sent: Monday, August 26,
2013 1:56 PM
To: HTTPAPI and FTPAPI Projects
Subject: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart>> (Stmt: 231000) : Type must be 'anyType'..
Mike,
Thanks a ton for your inputs. Finally I was able to create the>>
stubs. While running WSDL2RPG I set value of 64 instead of 128
for>
default DIM size.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>>> 161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx> [mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:bounces@xxxxxxxxxxxxxxxxxxxxx
m
] On Behalf Of Mike Krebs
Sent: Tuesday, August 06, 2013 5:56 PM
To: HTTPAPI and FTPAPI Projects
Subject: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart>> (Stmt: 231000) : Type must be 'anyType'..
I don't use WSDL2RPG but am familiar with this problem from days> of> old and I have tested WSDL back before we moved to 7.1.
Here is a simple way to get going. Recreate your programs by
running
the WSDL2RPG including:
DIM(25) STRLEN(64)
I didn't have time to find the size that will work for you, but
the> idea is to reduce the size of some of the structures in your
program
until it fits. Does your program compile now?
Second way...
Look in WSMAXIMO. Find the array dimension statements. They are>
called DIM_Ax where x is a number. You will find them all set to
128
in your current version.
Take DIM_A1, do a search for where it is used. It is used on>> CARS_CARSType. Now consider your web service. Do you need 128>> instances of CARS_CARSType?
If the answer is no, decide what is good number. Change the> DIM_A1> constant to be something smaller (hopefully).
Continue to do this for all 10 DIM constants.
Recompile.
Does it compile now?
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx> [mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:bounces@xxxxxxxxxxxxxxxxxxxxx
m
] On Behalf Of Gupta, Gaurav (GE>
Capital, non-ge)
Sent: Tuesday, August 06, 2013 5:02 PM
To: HTTPAPI and FTPAPI Projects
Subject: RE: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart>> (Stmt: 231000) : Type must be 'anyType'..
Hi Thomas,
I went through the FAQ document but unfortunately it didn't> worked> out for me. I am attaching the stubs which got created> after> importing the WSDL file. If you can have look at it and give> some> direction it will really helpful as currently I am stuck and> not> able to move forward.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx> [mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:bounces@xxxxxxxxxxxxxxxxxxxxx
m
] On Behalf Of Thomas Raddatz
Sent: Thursday, August 01, 2013 1:29 PM
To: HTTPAPI and FTPAPI Projects
Subject: Re: WSDL2RPG Failing - WSDL2RPG/WSDL2R01.cbElementStart>> (Stmt: 231000) : Type must be 'anyType'..
Gaurav,
Please read FAQ "What to do in case of a RNF0501 compile error>> message v1.0". It describes how to resolve the problem.
The PDF should be included in the WSDL2RPG zip file. But you can>
also download it from here:
http://www.tools400.de/English/Freeware/WSDL2RPG/wsdl2rpg.html
Basically your compile failed due to error message RNF0501, which>
means that you hit the 64k barrier of RPG. In order to solve the>
problem you need to reduce the size of your arrays and/or reduce
the
size of your string fields.
Regards,
Thomas.
Am 01.08.2013 16:31, schrieb Gupta, Gaurav (GE Capital, non-ge):
Thomas,
Apologies, I send you the wrong file. Attached is the correct one.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx>
[mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
Thomas>
Raddatz
Sent: Thursday, August 01, 2013 4:40 AM
To: HTTPAPI and FTPAPI Projects
Subject: Re: WSDL2RPG Failing - WSDL2RPG/
WSDL2R01.cbElementStart> (Stmt: 231000) : Type must be 'anyType'..
Gaurav,
That problem seems to be an authorization problem, doesn't it?
* Enable performance collection . : *PEP
* Profiling data . . . . . . . . . : *NOCOL
*----------------------------------------------------------------
---
-* Module not replaced. Need *OBJEXIST and *OBJMGT authority.
* * * * * E N D O F C O M P I L A T I O N * * * **
> Rpt from>
USRACDEV <
Apparently the modules already exists and you are not allowed> to> delete it due to missing authority. Maybe EDTOBJAUT can shed> some lighton it.
Regards,
Thomas.
Am 31.07.2013 23:12, schrieb Gupta, Gaurav (GE Capital, non-ge):
Hi Thomas,
Need some further assistance on the subject matter. After>> importing the wsdl file using WSDL2RPG I am trying to create the>> modules. But compilations are failing. Attached is the file>> highlighting the errors I am getting and WSDL file which has been>> imported. Please have a look and suggest.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: Gupta, Gaurav (GE Capital, non-ge)
Sent: Wednesday, July 17, 2013 9:57 AM
To: HTTPAPI and FTPAPI Projects
Subject: RE: WSDL2RPG Failing - WSDL2RPG/
WSDL2R01.cbElementStart> (Stmt: 231000) : Type must be 'anyType'..
Thanks Thomas!! It was a great help. Iam able to successfully>> create the stb module.
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-
bounces@xxxxxxxxxxxxxxxxxxxxxx>
[mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
Thomas>
Raddatz
Sent: Wednesday, July 17, 2013 4:32 AM
To: HTTPAPI and FTPAPI Projects
Subject: Re: WSDL2RPG Failing - WSDL2RPG/
WSDL2R01.cbElementStart> (Stmt: 231000) : Type must be 'anyType'..
Gaurav,
You need library LIBHTTP on the system where you want to> install> WSDL2RPG because WSDL2RPG uses HTTP API under the cover.> Without> library LIBHTTP the installer (actually the compiler)> cannot find> the copy books of HTTP API.
I do not know why you cannot see v1.15.8, but it is there. Is> it> possible that you use a proxy server to connect to the Internet?
If> the answer is "yes", then it might possible that the proxy holds
an oldcopy.
Please try the following direct links to download both files:
http://www.tools400.de/Downloads/Freeware/Tools/wsdl2rpg.zip
http://www.tools400.de/Downloads/Freeware/Tools/wsdl2rpg_v1.15.8
.zi
p
The first one is the original file. That file might also be>>
cached somewhere and therefore you may get v1.15.7. The second
link>
points to a renamed copy of the original 1.15.8 file and that link>> cannot be cached, because it is new.
Last but not least starting from tomorrow I may not be able to>
answer any questions for the next 10 days.
Regards,
Thomas.
Am 17.07.2013 00:23, schrieb Gupta, Gaurav (GE Capital, non-ge):
Thomas,
I think I found the latest version under V1.15.7. I>> started installing
the tool and it failed. Below is the snapshot of error>> message. Is it
because in my system I don't have LIBHTTP. Please suggest.
[cid:image003.jpg@01CE8249.3BDB14C0]
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx>
[mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On BehalfOfGupta,
Gaurav (GE Capital, non-ge)
Sent: Tuesday, July 16, 2013 4:06 PM
To: HTTPAPI and FTPAPI Projects
Subject: RE: WSDL2RPG Failing - WSDL2RPG/
WSDL2R01.cbElementStart (Stmt:
231000) : Type must be 'anyType'..
Thomas,
I did cleared my cache but still do not see thelatestversion.
[[1]cid:image003.jpg@01CE823E.633C1BF0]
Thanks,
Gaurav
Gaurav Gupta
Project Leader, GE(Contractor)
GE Capital
Rail Services
T: +1 312-853-5536
D: *750-5536
C: +1 847-337-1852
[2]gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx>
161 N Clark St.
Chicago, IL - 60601, USA
-----Original Message-----
From: [3]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx>
[[4]mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On>> Behalf Of Thomas
Raddatz
Sent: Tuesday, July 16, 2013 3:03 PM
To: HTTPAPI and FTPAPI Projects
Subject: Re: WSDL2RPG Failing - WSDL2RPG/
WSDL2R01.cbElementStart (Stmt:
231000) : Type must be 'anyType'..
Gaurav,
I uploaded v1.15.8 today at noon. Now it is night, soitshould be
there.
At least I can see it here, in Germany. ;-)
Please ensure that your Internet browser displays the>> actual page and
not a cached version. For example, in Firefox that isCtrl+R.
Regards,
Thomas.
Am 16.07.2013 20:26, schrieb Gupta, Gaurav (GECapital,non-ge):
> Thomas ,
> On the below link I am finding the latest version as v1.
15.7. Where
can I get v1.15.8?
> [5]http://www.tools400.de/English/english.html
>
> Thanks,
> Gaurav
>
> Gaurav Gupta
> Project Leader, GE(Contractor)
> GE Capital
> Rail Services
>
> T: +1 312-853-5536
> D: *750-5536
> C: +1 847-337-1852
> [6]gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx<
mailto:gaurav.gupta3@xxxxxx%3cmailto:gaurav.gupta3@xxxxxx>>
>
> 161 N Clark St.
> Chicago, IL - 60601, USA
>
>
> -----Original Message-----
> From:
[7]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%3cmailto:ftpapi->
bounces@xxxxxxxx<mailto:bounces@xxxxxxxx>
ottklement.com>
> [[8]mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
Behalf> >>> Of Gupta,
> Gaurav (GE Capital, non-ge)
> Sent: Tuesday, July 16, 2013 11:52 AM
> To: HTTPAPI and FTPAPI Projects
> Subject: RE: WSDL2RPG Failing-WSDL2RPG/WSDL2R01.cbElementStart
(Stmt: 231000) : Type must be 'anyType'..
>
> Thomas,
> This installation of the tool does not need to happen
in
Production.
I mean I will install this tool in dev and create my> stub> and move this
stub to production. Do I need additional objects as> well> be moved into
production.
>
> Thanks,
> Gaurav
>
>
>
> -----Original Message-----
> From:
[9]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%3cmailto:ftpapi->
bounces@xxxxxxxx<mailto:bounces@xxxxxxxx>
ottklement.com>
> [[10]mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] OnBehalfOf
Gupta,
> Gaurav (GE Capital, non-ge)
> Sent: Tuesday, July 16, 2013 9:56 AM
> To: HTTPAPI and FTPAPI Projects
> Subject: RE: WSDL2RPG Failing-WSDL2RPG/WSDL2R01.cbElementStart
(Stmt: 231000) : Type must be 'anyType'..
>
> Hi Thomas,
> Thanks for the response. Does this means I need touninstallthe
current version and install the latest version or canbothversion
reside. One more thing does WSDL2RPG has any impact onOSupgrade.
There is a plan to upgrade the OS from V5R4 to V7R1.
>
> Thanks,
> Gaurav
>
> Gaurav Gupta
> Project Leader, GE(Contractor)
> GE Capital
> Rail Services
>
> T: +1 312-853-5536
> D: *750-5536
> C: +1 847-337-1852
> [11]gaurav.gupta3@xxxxxx<mailto:gaurav.gupta3@xxxxxx<
mailto:gaurav.gupta3@xxxxxx%3cmailto:gaurav.gupta3@xxxxxx>>
>
> 161 N Clark St.
> Chicago, IL - 60601, USA
>
> -----Original Message-----
> From:
[12]ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx<mailto:ftpapi-<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%3cmailto:ftpapi->
bounces@lists.s<mailto:bounces@lists.s>
cottklement.com>
> [[13]mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx] On
BehalfOf
Thomas
> Raddatz
> Sent: Tuesday, July 16, 2013 5:03 AM
> To: HTTPAPI and FTPAPI Projects
> Subject: Re: WSDL2RPG Failing-WSDL2RPG/WSDL2R01.cbElementStart
(Stmt: 231000) : Type must be 'anyType'..
>
> Gaurav,
>
> I am sorry, but v1.6 was released in September 2008> and> hence is far
too old. If I remember correctly this problem has beenfixedwith
v1.7.2, but I would not go with that version. It isalsofarto old:
>
>
> Version 1.7.2 - 27.07.2009
> --------------------------
>
> Fixed: Now initializing complex types to 'anyType'> in> case it does
> not have further type information, e.g.:>> <xsd:complexType
> name="Documentos"/>
>
>
> Please download and install the current version 1.15.
8> and give it a
try.
> If it generates a stub for your current wsdl file,> and> if you want to
use it in production, please carefully test v1.15.8> with> your existing
stub modules. I am pretty sure that your old stub modulesworkwith
1.15.8, but we all know Murphy's Law.
>
> Regards,
>
> Thomas.
>
> Am 15.07.2013 23:52, schrieb Gupta, Gaurav (GECapital,non-ge):
>> Hi Thomas,
>>
>> I am trying to consume a WSDL file published> from IBMMaximo
using
>> WSDL2RPG command. Current version is V1.6. Iamgetting the
below
>> error.
>>
>>
>> WSDL2RPG URL('file:/gaurav/cars.wsdl')
SRCFILE(TEST#N28/QMAXIMO)
>> SRCMBR(WS
>>
>> 1852)
>>
>> WSDL2RPG/WSDL2R01.cbElementStart (Stmt: 231000)> :> Type must be
>> 'anyType'..
>>
>> Message file WSDL2RPG in *LIBL not
>> found.
>>
>> The call to main ended in error (C G D
>> F).
>>
>> D
>>
>> The call to main ended in error (C G D
>> F).
>>
>> D
>>
>> Library RBTCONLIB not found.
>>
>> Application error. CPF2407 unmonitored by BASICS1at
>> statement
>>
>> 0000054300, instruction
>> X'0000'.
>>
>>
>> Can you please suggest.
>>
>>
>> Thanks,
>>
>> Gaurav
>>
>>
>>
>>
---------------------------------------------------------------
---
--
-
>> -
>> - This is the FTPAPI mailing list. To unsubscribe,> pleasego to:
>>
[14]http://www.scottklement.com/mailman/listinfo/ftpapi
>>
---------------------------------------------------------------
---
--
-
>> -
>> -
>>
>
---------------------------------------------------------------
---
--
-
-
> - This is the FTPAPI mailing list. To unsubscribe,pleasego to:
> [15]http://www.scottklement.com/mailman/listinfo/ftpapi
>
---------------------------------------------------------------
---
--
-
-
> -
>
---------------------------------------------------------------
---
--
-
-
> - This is the FTPAPI mailing list. To unsubscribe,pleasego to:
> [16]http://www.scottklement.com/mailman/listinfo/ftpapi
>
---------------------------------------------------------------
---
--
-
-
> -
>
---------------------------------------------------------------
---
--
-
-
> - This is the FTPAPI mailing list. To unsubscribe,pleasego to:
> [17]http://www.scottklement.com/mailman/listinfo/ftpapi
>
---------------------------------------------------------------
---
--
-
-
> -
>
---------------------------------------------------------------
---
--
-
-
> - This is the FTPAPI mailing list. To unsubscribe,pleasego to:
> [18]http://www.scottklement.com/mailman/listinfo/ftpapi
>
---------------------------------------------------------------
---
--
-
-
> -
>
---------------------------------------------------------------
---
--
-
-
-
This is the FTPAPI mailing list. To unsubscribe, pleasegoto:
[19]http://www.scottklement.com/mailman/listinfo/ftpapi
---------------------------------------------------------------
---
--
-
-
-
References
1. cid:image003.jpg@01CE823E.633C1BF0
2. mailto:gaurav.gupta3@xxxxxx
3. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
4. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
5. http://www.tools400.de/English/english.html
6. mailto:gaurav.gupta3@xxxxxx%3cmailto:gaurav.gupta3@xxxxxx
7. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%25>
3cmailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
8. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
9. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%25>
3cmailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
10. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
11. mailto:gaurav.gupta3@xxxxxx%3cmailto:gaurav.gupta3@xxxxxx
12. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%<
mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx%25>
3cmailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
13. mailto:ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
14. http://www.scottklement.com/mailman/listinfo/ftpapi
15. http://www.scottklement.com/mailman/listinfo/ftpapi
16. http://www.scottklement.com/mailman/listinfo/ftpapi
17. http://www.scottklement.com/mailman/listinfo/ftpapi
18. http://www.scottklement.com/mailman/listinfo/ftpapi
19. http://www.scottklement.com/mailman/listinfo/ftpapi
---------------------------------------------------------------
---
--
-
-
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
---------------------------------------------------------------
---
--
-
-
-
----------------------------------------------------------------
---
--
-
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
----------------------------------------------------------------
---
--
-
-
----------------------------------------------------------------
---
--
-
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
----------------------------------------------------------------
---
--
-
-
-----------------------------------------------------------------
---
--
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------
---
--
-
-----------------------------------------------------------------
---
--
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------
---
--
-
-------------------------------------------------------------------
---
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-------------------------------------------------------------------
---
-
-------------------------------------------------------------------
---
- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-------------------------------------------------------------------
---
- [Anhang "SecureZIP Attachments.zip" gelöscht von Thomas
Raddatz/OBI/
DE]----------------------------------------------------------------
---
---- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-------------------------------------------------------------------
---
-
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for> the intended recipient only. Access, disclosure, copying,> distribution, or reliance on any of it by anyone else is prohibited> and may be a criminal offence. Please delete if obtained in error> and email confirmation to the sender.
[Anhang "SecureZIP Attachments.zip" gelöscht von Thomas Raddatz/OBI/
DE]-------------------------------------------------------------------
---- This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
----------------------------------------------------------------------
-
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the intended recipient only. Access, disclosure, copying, distribution, or reliance on any of it by anyone else is prohibited and may be a criminal offence. Please delete if obtained in error and email confirmation to the sender.
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------