[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Problem calling webservice using WSDL2RPG tool
Avinash,
The namespace value is correct because now we get into procedure
tns_ListOfValuesStart_of_tns_ListOfAgileUpdateLov() that retrieves the
values of the "ListOfValues" array from the XML stream.
I strongly assume that the number of elements returned by the web
service exceeds the number of elements defined at the dim() statement.
Please enable the debug log and check if that is true. You should see
something similar to this at the end of the debug log:
WSDL2RPG Ver 1.14beta4 released 2011-02-05
WSDL2RPG: MCH0603: Range of subscript value or character string error.
received from procedure:
tns_ListOfValuesStart_of_tns_ListOfAgileUpdateLov
and statement: 178100
WSDL2RPG (eXpat error): (-1009) Range of subscript value or character
string error.
received at line: 1
at column: 3332
from procedure: WSDL2R97_XMLSAXParser_parse
and statement: 101900
SetError() #16: recvchunk: saveproc: Not all data was writtenÜ
http_close(): entered
You may also start the debugger and add a breakpoint to the following
statement:
xsdLocal0_ListOfValues.x = xsdLocal0_ListOfValues.x + 1;
Now check how often you stop at the breakpoint and compare it to the
the number of items at the dim() statement:
*
* Array dimensions:
D DIM_A1 C 128
D item
likeds(xsdLocal0_ListOfValues_t)
D dim(DIM_A1)
If you cannot increase the number of elements because of the 64k
restriction of RGP, you need to use dynamic arrays instead of static
arrays. There is an FAQ document that describes how to use dynamic
arrays:
FAQ How to Use Dynamic Arrays_v1.1
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 07.02.2011 09:05:04:
> Von: avinash_miraskar@xxxxxxxxxxx
> An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> Datum: 07.02.2011 09:16
> Betreff: Re: Problem calling webservice using WSDL2RPG tool
> Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
>
> Hi Thomas,
>
> I download the latest Beta4 version and regenerated the webservice
> code and when
> i gave a call to the webservice program, it was crashing with the
following
> error message:
>
> ->Range of subscript value or character string error.
> -> 16: recvdoc: saveproc: Not all data was written!
> -1009: Range of subscript value or character string error.
>
> When i compared with older code, i saw that you have replaced the
"Blank"
> namespaces with
'http://www.siebel.com/xml/BT%20Agile%20Update%20LOV'.
>
> I am not sure if we are still missing something?
>
> Pgm:TEST009 (attached in mail):
> In procedures :xsdLocal0_ListOfAgileUpdateLovStart &
> xsdLocal0_ListOfValuesStart_of_xsdLocal0_ListOfAgileUpdateLov for
> example uses
> these namespaces..
>
> Regards,
> Avinash.
>
>
>
>
>
> ----- Original Message ----
> From: "thomas.raddatz@xxxxxx" <thomas.raddatz@xxxxxx>
> To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> Sent: Fri, 4 February, 2011 8:51:52 PM
> Subject: Re: Problem calling webservice using WSDL2RPG tool
>
>
> Avanish,
> I fixed the error you reported. The different use of namespaces
for
> RPC/encoded, RPC/literal and Document/literal is driving me
crazy.
> However it seems that I got it now. You can download the next
beta
> from here:
>
[1][1]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.14bet
a3_
> 20110204_1609.zip
> The good news is that I eventually managed to set up a web
service
> from your wsdl file. That means that I could do a live test and
that I
> am going to add that service to my test cases.
> Last but not least I attached the sample stub and test program
that I
> used to call your web service. Did you already notice the new
> PARMSTRUCT and STRUCTSTMF parameters of command WSDL2RPG? The zip
file
> also includes the output produced with PARMSTRUCT(*STMF).
> Thomas.
> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 04.02.2011
12:11:49:
> > Von: avinash_miraskar@xxxxxxxxxxx
> > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> > Datum: 04.02.2011 12:19
> > Betreff: Re: Problem calling webservice using WSDL2RPG tool
> > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> >
> > Hi Thomas,
> >
> > One more thing, while i was testing the output got from the
> webservice, i
> > expected the output to be in complex Output parm
"SiebelMessage"
> > field, but i am
> > getting the output in "#XML_spcString"(As one longg string).
Can you
> > please tell
> > me what is that i need to correct to get the output in this
complex
> output
> > parameter.
> >
> > I tested this wsdl file from a testing tool, the output comes
in the
> output
> > parm.
> >
> > Basically the webservice in this example passes nothing, and
gets
> output in a
> > complex data structure which has lot of levels.
> >
> >
> > Let me know if you need more info. Pls check pgm WS0098.
> >
> > Regards,
> > Avinash.
> >
> >
> >
> > ----- Original Message ----
> > From: Thomas Raddatz <thomas.raddatz@xxxxxxxxxxx>
> > To: HTTPAPI and FTPAPI Projects <ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
> > Sent: Thu, 3 February, 2011 10:16:36 PM
> > Subject: Re: Problem calling webservice using WSDL2RPG tool
> >
> > You are welcome and I am happy that it works, now.
> >
> > Thomas.
> >
> > Am 03.02.2011 12:09, schrieb Avinash Miraskar:
> > > Thanks Thomas, will try and let you know..
> > >
> > >
> > >
> > >
> > > ----- Original Message ----
> > > From: "thomas.raddatz@xxxxxx"<thomas.raddatz@xxxxxx>
> > > To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> > > Sent: Wed, 2 February, 2011 6:07:23 PM
> > > Subject: Re: Problem calling webservice using WSDL2RPG tool
> > >
> > >
> > > Avinash,
> > > I eventually fixed the problem with your web service. The
core
> problem
> > > was that I did not pay attention to the "use" attribute
of
> element
> > > <soap:body> which is a nested element of<binding>. The
use
> attributes
> > > specifies "literal" for the body of the envelope whereas
I
> assumed
> > > "encoded" because of the "style" attribute of
> element<soap:binding>.
> > > I also add quotes to the soapAction header, now. You can
> download the
> > > fix from the URL below:
> > >
> > >
>
[1][2][2]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.14
bet
> a2_
> > > 20110202_1307.zip
> > > By the way the first bug fix of beta1 preseved the order
of
> the<part>
> > > elements of element<message>.
> > > Now the generated request message as send over the wire
looks
> like
> > > this:
> > > <?xml version="1.0" encoding="UTF-8"?>
> > > <soapenv:Envelope
> > >
>
xmlns:soapenv="[2][3][3]http://schemas.xmlsoap.org/soap/envelope/"
> > > xmlns:tns="[3][4][4]http://siebel.com/asi/"
> > >
> > >
>
xmlns:xsdLocal0="[4][5][5]http://www.siebel.com/xml/BT%20Agile%20Updat
e%2
> 0LO
> > > V">
> > > <soapenv:Body>
> > > <tns:Mapics_spcTE>
> > >
> > >
<Process_spcInstance_spcId>string</Process_spcInstance_spcId>
> > > <Step_spcName>string</Step_spcName>
> > > <_XML_spcString>string</_XML_spcString>
> > > <Object_spcId>string</Object_spcId>
> > >
> > >
>
<Siebel_spcOperation_spcObject_spcId>string</Siebel_spcOperation_spcOb
> > > ject_spcId>
> > > <SiebelMessage>
> > > <xsdLocal0:ListOfAgileUpdateLov>
> > > <xsdLocal0:ListOfValues>
> > >
> <xsdLocal0:Type>string</xsdLocal0:Type>
> > >
> <xsdLocal0:Name>string</xsdLocal0:Name>
> > >
> <xsdLocal0:Value>string</xsdLocal0:Value>
> > >
> <xsdLocal0:SubType>string</xsdLocal0:SubType>
> > >
> <xsdLocal0:Active>string</xsdLocal0:Active>
> > > </xsdLocal0:ListOfValues>
> > > </xsdLocal0:ListOfAgileUpdateLov>
> > > </SiebelMessage>
> > > <Error_spcCode>string</Error_spcCode>
> > > <Error_spcMessage>string</Error_spcMessage>
> > > </tns:Mapics_spcTE>
> > > </soapenv:Body>
> > > </soapenv:Envelope>
> > > Unfortunately I am not able (actually it is Axis2) to
generate
> a Java
> > > web service for your wsdl file and therefore I cannot do
a
> live test.
> > > Please regenerate your stub module and let me know if it
> works, now.
> > > Thomas.
> > > ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am
01.02.2011
> 07:23:04:
> > > > Von: avinash_miraskar@xxxxxxxxxxx
> > > > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> > > > Datum: 01.02.2011 07:29
> > > > Betreff: Re: Problem calling webservice using WSDL2RPG
tool
> > > > Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> > > >
> > > > Hi Thomas,
> > > >
> > > > I tried installing the 1.14beta1 release, but the
problem
> still
> > > persists, its
> > > > still generating wrong soap request message in the
program,
> To
> > > > correct this, i
> > > > used a functional SOAP testing tool to generate the
correct
> soap
> > > request and
> > > > copy pasted the code into my program to make it work.
> > > >
> > > > Additionally i had to correct the program to add
double
> quotes to
> > > soap action.
> > > >
> > > > And regarding "content-type", as you said omitting
> "charset=utf-8"
> > > > still works.
> > > > Let me know what you think of these.. Thanks for your
help
> !
> > > >
> > > > Regards,
> > > > Avinash.
> > > >
> > > >
> > > >
> > > > ----- Original Message ----
> > > > From: Thomas Raddatz<thomas.raddatz@xxxxxxxxxxx>
> > > > To: HTTPAPI and FTPAPI
> Projects<ftpapi@xxxxxxxxxxxxxxxxxxxxxx>
> > > > Sent: Tue, 1 February, 2011 3:06:47 AM
> > > > Subject: Re: Problem calling webservice using WSDL2RPG
tool
> > > >
> > > > Avinash,
> > > >
> > > > I wonder if you really had to add "charset=utf-8" to
the
> > > "content-type"
> > > > header because "utf-8" should be the default value.
Anyway,
> if it
> > > works
> > > > anything is fine with it.
> > > >
> > > > I fixed the problem with the soap request and made
> 1.14beta1
> > > available on
> > > > my Freeware page:
> > > >
> > > >
>
[5][6][6]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.
> > > > 14beta1_20110131_2207.zip
> > > >
> > > >
> > > > Please use the direct link because that beta is not
yet
> available on
> > > the
> > > > "official" WSDL2RPG page. There is still a little bug
in
> A_INSTALL
> > > (batch
> > > > install option on v5r3 systems) that I want to fix
before.
> > > >
> > > > Please let me know if beta1 works for you.
> > > >
> > > > Thomas.
> > > >
> > > >
> > > > Am 31.01.2011 12:20, schrieb Avinash Miraskar:
> > > > > Thanks Thomas, basically i corrected the
content-type
> from
> > > text/xml to
> > > > >text/xml;
> > > > > charset=utf-8. Additionally the double quotes to
soap
> action did
> > > help to
> > > > >resolve
> > > > > my issue.
> > > > >
> > > > > Apart from this the RPG stub had generated wrong
soap
> request,
> > > which i
> > > > >corrected
> > > > > it in WS0090 program. I have attached the code for
your
> reference.
> > > > >
> > > > > When i used the code generated by the tool, it used
to
> give me
> > > these set of
> > > > > errors:
> > > > > 13: HTTP/1.1 500 Internal Server Error
> > > > > SOAP-ENV:Server: There is no active Web Service
with
> operation
> > > named
> > > > > 'http://siebel.com/asi/:Mapics
TE'.(SBL-EAI-04313)
> > > > >
> > > > > Let me know what you think of them.. Thank you for
your
> help..
> > > > >
> > > > > Regards,
> > > > > Avinash.
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message ----
> > > > > From:
"thomas.raddatz@xxxxxx"<thomas.raddatz@xxxxxx>
> > > > > To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> > > > > Sent: Mon, 31 January, 2011 3:25:04 PM
> > > > > Subject: Re: Problem calling webservice using
WSDL2RPG
> tool
> > > > >
> > > > >
> > > > > Avinash,
> > > > > SoapUI specifies the soap action parameter as
shown
> below:
> > > > > Content-Type: text/xml;charset=UTF-8
> > > > > SOAPAction:
> "rpc/http://siebel.com/asi/:Mapics_spcTE"
> > > > > User-Agent: Jakarta Commons-HttpClient/3.1
> > > > > Host: sbluatweb01.ad.agi
> > > > > Proxy-Connection: Keep-Alive
> > > > > Content-Length: 1252
> > > > > Please open your web service stub module
(WS0099)
> and add the
> > > double
> > > > > quotes to the soap action parameter likes this:
> > > > > headers.contentType =
> > > > >
> ManagedMemoryDataSource_getContentType(hDataSource);
> > > > > headers.soapAction =
> > > '"rpc/http://siebel.com/asi/:Mapics_spcTE"';
> > > > > Then recompile the stub module and try it
again.
> > > > > Please let me know if that solved the problem.
I do
> not yet
> > > know why
> > > > > the soap action parameter has to be set into
double
> quotes. I
> > > will try
> > > > > to get an answer to that question. Maybe that
Scott
> can shed
> > > some
> > > > > light on that.
> > > > > Thomas.
> > > > > ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am
> 31.01.2011
> > > 07:29:52:
> > > > > > Von: avinash_miraskar@xxxxxxxxxxx
> > > > > > An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
> > > > > > Datum: 31.01.2011 09:59
> > > > > > Betreff: Problem calling webservice using
> WSDL2RPG tool
> > > > > > Gesendet von:
> ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
> > > > > >
> > > > > > Hello All,
> > > > > >
> > > > > > I have installed WSDL2RPG tool and i
generated
> > the RPG stub
> > > and
> > > > > > program out of
> > > > > > it. Later when i try to invoke the program,
it
> gives me
> > > these
> > > > > errors:
> > > > > >
> > > > > > 1) 13: HTTP/1.1 400 Bad Request.
> > > > > > 2)SOAP-ENV:Client: SOAPAction '<?>' is of
> invalid format:
> > > SOAPAction
> > > > > should
> > > > > > be either rpc/operationName or
> document/operationName.
> > > > > .
> > > > > >
> > > > > > I have attached the following :
> > > > > > 1) WSDL file
> > > > > > 2)Corresponding RPG Program and stub
generated
> out of
> > > WSDL2RPG tool.
> > > > > > 3) HTTP error log after invoking the RPG
> program.
> > > > > >
> > > > > > Can someone please help me resolve this
issue.
> Thanks for
> > > your help
> > > > > > and let me
> > > > > > know if you need additional info.
> > > > > >
> > > > > > Regards,
> > > > > > Avinash.
> > > > > >
> > > > > > [Anhang "MapicTEType.WSDL" gelöscht von
Thomas
> > > Raddatz/OBI/DE]
> > > > > > [Anhang "RPGsources.zip" gelöscht von
Thomas
> > > Raddatz/OBI/DE] [Anhang
> > > > > > "httpapi_debug.txt" gelöscht von Thomas
> Raddatz/OBI/DE]
> > > > > >
> > > > >
> > >
>
----------------------------------------------------------------------
> > > > > -
> > > > > > This is the FTPAPI mailing list. To
> > unsubscribe, please go
> > > to:
> > > > > >
> [1][6][7][7]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > > > >
> > > > >
> > >
>
----------------------------------------------------------------------
> > > > > -
> > > > >
> > > > > --
> > > > > IMPORTANT NOTICE:
> > > > > This email is confidential, may be legally
> privileged, and is
> > > for the
> > > > > intended recipient only. Access, disclosure,
> copying,
> > > distribution, or
> > > > > reliance on any of it by anyone else is
prohibited
> and may be
> > > a
> > > > > criminal
> > > > > offence. Please delete if obtained in error and
> email
> > > confirmation to
> > > > > the sender.
> > > > >
> > > > > References
> > > > >
> > > > > 1.
> [7][8][8]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > >
>
----------------------------------------------------------------------
> > > -
> > > > > This is the FTPAPI mailing list. To unsubscribe,
please
> go to:
> > > > >
> [8][9][9]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > > >
> > >
>
----------------------------------------------------------------------
> > > -
> > > >
> > >
>
----------------------------------------------------------------------
> > > -
> > > > This is the FTPAPI mailing list. To unsubscribe,
please go
> to:
> > > >
[9][10][10]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > >
> > >
>
----------------------------------------------------------------------
> > > -
> > > >
> > > >
> > > >
> > > >
> > >
>
----------------------------------------------------------------------
> > > -
> > > > This is the FTPAPI mailing list. To unsubscribe,
please go
> to:
> > > >
[10][11][11]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > >
> > >
>
----------------------------------------------------------------------
> > > -
> > > >
> > >
> > > --
> > > IMPORTANT NOTICE:
> > > This email is confidential, may be legally privileged,
and is
> for the
> > > intended recipient only. Access, disclosure, copying,
> distribution, or
> > > reliance on any of it by anyone else is prohibited and
may be
> a
> > > criminal
> > > offence. Please delete if obtained in error and email
> confirmation to
> > > the sender.
> > >
> > > References
> > >
> > > 1.
> >
>[12][12]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.
> > 14beta2_20110202_1307.zip
> > >p
> > >
> > > 2. [13][13]http://schemas.xmlsoap.org/soap/envelope/
> > > 3. [14][14]http://siebel.com/asi/
> > > 4.
[15][15]http://www.siebel.com/xml/BT%20Agile%20Update%20LOV
> > > 5.
>
[16][16]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
> > > 6.
[17][17]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > 7.
[18][18]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > 8.
[19][19]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > 9.
[20][20]http://www.scottklement.com/mailman/listinfo/ftpapi
> > > 10.
[21][21]http://www.scottklement.com/mailman/listinfo/ftpapi
> > >
> > >
> > >
> > >
>
----------------------------------------------------------------------
> -
> > > This is the FTPAPI mailing list. To unsubscribe, please go
to:
> > > [22][22]http://www.scottklement.com/mailman/listinfo/ftpapi
> > >
>
----------------------------------------------------------------------
> -
> > >
> >
>
----------------------------------------------------------------------
> -
> > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > [23][23]http://www.scottklement.com/mailman/listinfo/ftpapi
> >
>
----------------------------------------------------------------------
> -
> >
> >
> > [Anhang "RPGsources.zip" gelöscht von Thomas Raddatz/OBI/DE]
> >
>
----------------------------------------------------------------------
> -
> > This is the FTPAPI mailing list. To unsubscribe, please go to:
> > [24][24]http://www.scottklement.com/mailman/listinfo/ftpapi
> >
>
----------------------------------------------------------------------
> -
>
> --
> IMPORTANT NOTICE:
> This email is confidential, may be legally privileged, and is for
the
> intended recipient only. Access, disclosure, copying,
distribution, or
> reliance on any of it by anyone else is prohibited and may be a
> criminal
> offence. Please delete if obtained in error and email
confirmation to
> the sender.
>
> References
>
> 1.
> [25]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.
> 14beta3_20110204_1609.zip
>
> 2.
[26]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.14beta2
_
> 3. [27]http://schemas.xmlsoap.org/soap/envelope/
> 4. [28]http://siebel.com/asi/
> 5. [29]http://www.siebel.com/xml/BT%20Agile%20Update%20LO
> 6. [30]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
> 7. [31]http://www.scottklement.com/mailman/listinfo/ftpapi
> 8. [32]http://www.scottklement.com/mailman/listinfo/ftpapi
> 9. [33]http://www.scottklement.com/mailman/listinfo/ftpapi
> 10. [34]http://www.scottklement.com/mailman/listinfo/ftpapi
> 11. [35]http://www.scottklement.com/mailman/listinfo/ftpapi
> 12. [36]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
> 13. [37]http://schemas.xmlsoap.org/soap/envelope/
> 14. [38]http://siebel.com/asi/
> 15. [39]http://www.siebel.com/xml/BT%20Agile%20Update%20LOV
> 16. [40]http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
> 17. [41]http://www.scottklement.com/mailman/listinfo/ftpapi
> 18. [42]http://www.scottklement.com/mailman/listinfo/ftpapi
> 19. [43]http://www.scottklement.com/mailman/listinfo/ftpapi
> 20. [44]http://www.scottklement.com/mailman/listinfo/ftpapi
> 21. [45]http://www.scottklement.com/mailman/listinfo/ftpapi
> 22. [46]http://www.scottklement.com/mailman/listinfo/ftpapi
> 23. [47]http://www.scottklement.com/mailman/listinfo/ftpapi
> 24. [48]http://www.scottklement.com/mailman/listinfo/ftpapi
>
>
> [Anhang "test009" gelöscht von Thomas Raddatz/OBI/DE] [Anhang
> "test010" gelöscht von Thomas Raddatz/OBI/DE]
>
----------------------------------------------------------------------
-
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> [49]http://www.scottklement.com/mailman/listinfo/ftpapi
>
----------------------------------------------------------------------
-
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a
criminal
offence. Please delete if obtained in error and email confirmation to
the sender.
References
1. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.14beta3_
2. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.14bet
3. http://schemas.xmlsoap.org/soap/envelope/
4. http://siebel.com/asi/
5. http://www.siebel.com/xml/BT%20Agile%20Update%2
6. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
7. http://www.scottklement.com/mailman/listinfo/ftpapi
8. http://www.scottklement.com/mailman/listinfo/ftpapi
9. http://www.scottklement.com/mailman/listinfo/ftpapi
10. http://www.scottklement.com/mailman/listinfo/ftpapi
11. http://www.scottklement.com/mailman/listinfo/ftpapi
12. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
13. http://schemas.xmlsoap.org/soap/envelope/
14. http://siebel.com/asi/
15. http://www.siebel.com/xml/BT%20Agile%20Update%20LOV
16. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
17. http://www.scottklement.com/mailman/listinfo/ftpapi
18. http://www.scottklement.com/mailman/listinfo/ftpapi
19. http://www.scottklement.com/mailman/listinfo/ftpapi
20. http://www.scottklement.com/mailman/listinfo/ftpapi
21. http://www.scottklement.com/mailman/listinfo/ftpapi
22. http://www.scottklement.com/mailman/listinfo/ftpapi
23. http://www.scottklement.com/mailman/listinfo/ftpapi
24. http://www.scottklement.com/mailman/listinfo/ftpapi
25. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
26. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1.14beta2_
27. http://schemas.xmlsoap.org/soap/envelope/
28. http://siebel.com/asi/
29. http://www.siebel.com/xml/BT%20Agile%20Update%20LO
30. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
31. http://www.scottklement.com/mailman/listinfo/ftpapi
32. http://www.scottklement.com/mailman/listinfo/ftpapi
33. http://www.scottklement.com/mailman/listinfo/ftpapi
34. http://www.scottklement.com/mailman/listinfo/ftpapi
35. http://www.scottklement.com/mailman/listinfo/ftpapi
36. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
37. http://schemas.xmlsoap.org/soap/envelope/
38. http://siebel.com/asi/
39. http://www.siebel.com/xml/BT%20Agile%20Update%20LOV
40. http://www.tools400.de/Downloads/Freeware/Beta/WSDL2RPG_v1
41. http://www.scottklement.com/mailman/listinfo/ftpapi
42. http://www.scottklement.com/mailman/listinfo/ftpapi
43. http://www.scottklement.com/mailman/listinfo/ftpapi
44. http://www.scottklement.com/mailman/listinfo/ftpapi
45. http://www.scottklement.com/mailman/listinfo/ftpapi
46. http://www.scottklement.com/mailman/listinfo/ftpapi
47. http://www.scottklement.com/mailman/listinfo/ftpapi
48. http://www.scottklement.com/mailman/listinfo/ftpapi
49. http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------