[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Example using http_url_post_stmf
Thomas
Yes the debug log was the original and you are right there was a blank as
first char, removing this it works fine.
Now another question when I use "http_post_stmf_xml" I can receive only a
value from the response which is the field that I pass in "peUsrDta" or
didn't understand anything? If I need more information from the response
file have I to use "http_post_stmf_xmlt" or different approch?
Thank you for your tips
Best regards
Mario
-----Messaggio originale-----
From: thomas.raddatz@xxxxxx
Sent: Monday, April 08, 2013 1:57 PM
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: Example using http_url_post_stmf
Mario,
If the provided debug log is the original HTTPAPI debug log, then there
are still leading character as there are:
0d 0a 20 3c 3f 78 6d 6c
CR LF BL < ? x m l
sendraw(): entered
<?xml version="1.0" encoding="utf-8"?>
<SOAP:Envelope
Please notice that the line after "sendraw()" does not start right at the
beginning. That is the space (hex 20) which is too much. Remove the space
and it should work. The CR and LF come from the HTTPAPI debug log and are
correct.
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 08.04.2013 12:44:03:
Von: martoriello@xxxxxxxxxxxxxxx
An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
Datum: 08.04.2013 12:53
Betreff: Re: Example using http_url_post_stmf
Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
Thomas and Mike
Thank you for your answers. I did the suggested changes but I received
always an error (parse error)
Attached is the debug file for the test.
I attach also the very simple pgm that I used for testing
Any suggestion?
thanks in advance
Mario
-----Messaggio originale-----
From: thomas.raddatz@xxxxxx
Sent: Monday, April 08, 2013 7:49 AM
To: ftpapi@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: Example using http_url_post_stmf
Mario,
The very first characters of a XML document must be the declaration
node:
<?xml version="1.0" encoding="utf-8"?>
Your XML file starts with carriage return, linefeed and lots of blanks:
I always use Notepad++ and the "XML Tools" plugin to validate XML files,
because MS Internet Explorer does not return all errors, such as this
one.
But with Notepadd++ I get the following error message:
Once that I removed the the invalid characters, the XML validates fine:
Regards,
Thomas.
ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx schrieb am 05.04.2013 17:56:26:
> Von: martoriello@xxxxxxxxxxxxxxx
> An: ftpapi@xxxxxxxxxxxxxxxxxxxxxx,
> Datum: 05.04.2013 18:04
> Betreff: Example using http_url_post_stmf
> Gesendet von: ftpapi-bounces@xxxxxxxxxxxxxxxxxxxxxx
>
> Hi all
> I am quite new to Httpapi and I am looking for an example about
> the use of http_url_post_stmf . I have to send a xml file to a
> webserver that is on a Epson printer. Looking at the example in
> Httpapi first I wrote a pgm that send the example data written in a
> program variable using “http_url_post_xml” and it was Ok . Then I
> modified the program to send the same data written now in a xml file
> using http_url_post_stmf and I receive an error. So I try to send
> the xml file using the HTTPAPI cmdline interface to try to
> understand what I receive from the server and the response file is :
>
> <?xml version="1.0" encoding="utf-8"?>
> <soapenv:Envelope xmlns:soapenv="
http://schemas.xmlsoap.org/soap/envelope/
> ">
> <soapenv:Body>
> <response success="false" code="PARSER_ERROR" status="0">
> </response>
> </soapenv:Body>
> </soapenv:Envelope>
> maybe I did a mistake when I copied the data in the xml file and
> there is no problem or I am using the http_url_post_stmf in a wrong
> mode. Another question is how in the incoming procedure can I read
> the values of success and code attributes of response tag?
> Attached is the XML file that I am using.
> Thanks in advance
> Mario[Anhang "esempio_scontrino.xml" gelöscht von Thomas Raddatz/
> OBI/DE]
>
-----------------------------------------------------------------------
> This is the FTPAPI mailing list. To unsubscribe, please go to:
> http://www.scottklement.com/mailman/listinfo/ftpapi
>
-----------------------------------------------------------------------
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a criminal
offence. Please delete if obtained in error and email confirmation to
the
sender.
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------
[Anhang "httpapi_debug.txt" gelöscht von Thomas Raddatz/OBI/DE]
[Anhang "xfkp262" gelöscht von Thomas Raddatz/OBI/DE]
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------
--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a criminal
offence. Please delete if obtained in error and email confirmation to the
sender.
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------
-----------------------------------------------------------------------
This is the FTPAPI mailing list. To unsubscribe, please go to:
http://www.scottklement.com/mailman/listinfo/ftpapi
-----------------------------------------------------------------------