curl(1) Curl Manual curl(1)
NAME
curl - transfer a URL
SYNOPSIS
curl [options / URLs]
DESCRIPTION
curl is a tool to transfer data from or to a server, using one of the
supported protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP,
IMAPS, LDAP, LDAPS, MQTT, POP3, POP3S, RTMP, RTMPS, RTSP, SCP, SFTP,
SMB, SMBS, SMTP, SMTPS, TELNET and TFTP). The command is designed to
work without user interaction.
curl offers a busload of useful tricks like proxy support, user
authentication, FTP upload, HTTP post, SSL connections, cookies, file
transfer resume, Metalink, and more. As you will see below, the number
of features will make your head spin!
curl is powered by libcurl for all transfer-related features. See
libcurl(3) for details.
URL
The URL syntax is protocol-dependent. You'll find a detailed
description in RFC 3986.
You can specify multiple URLs or parts of URLs by writing part sets
within braces and quoting the URL as in:
"http://site.{one,two,three}.com"
or you can get sequences of alphanumeric series by using [] as in:
"ftp://ftp.example.com/file[1-100].txt"
"ftp://ftp.example.com/file[001-100].txt" (with leading zeros)
"ftp://ftp.example.com/file[a-z].txt"
Nested sequences are not supported, but you can use several ones next
to each other:
"http://example.com/archive[1996-1999]/vol[1-4]/part{a,b,c}.html"
You can specify any amount of URLs on the command line. They will be
fetched in a sequential manner in the specified order. You can specify
command line options and URLs mixed and in any order on the command
line.
You can specify a step counter for the ranges to get every Nth number
or letter:
"http://example.com/file[1-100:10].txt"
"http://example.com/file[a-z:2].txt"
When using [] or {} sequences when invoked from a command line prompt,
you probably have to put the full URL within double quotes to avoid the
shell from interfering with it. This also goes for other characters
treated special, like for example '&', '?' and '*'.
Provide the IPv6 zone index in the URL with an escaped percentage sign
and the interface name. Like in
"http://[fe80::3%25eth0]/"
If you specify URL without protocol:// prefix, curl will attempt to
guess what protocol you might want. It will then default to HTTP but
try other protocols based on often-used host name prefixes. For
example, for host names starting with "ftp." curl will assume you want
to speak FTP.
curl will do its best to use what you pass to it as a URL. It is not
trying to validate it as a syntactically correct URL by any means but
is instead very liberal with what it accepts.
curl will attempt to re-use connections for multiple file transfers, so
that getting many files from the same server will not do multiple
connects / handshakes. This improves speed. Of course this is only done
on files specified on a single command line and cannot be used between
separate curl invokes.
OUTPUT
If not told otherwise, curl writes the received data to stdout. It can
be instructed to instead save that data into a local file, using the
-o, --output or -O, --remote-name options. If curl is given multiple
URLs to transfer on the command line, it similarly needs multiple
options for where to save them.
curl does not parse or otherwise "understand" the content it gets or
writes as output. It does no encoding or decoding, unless explicitly
asked so with dedicated command line options.
PROTOCOLS
curl supports numerous protocols, or put in URL terms: schemes. Your
particular build may not support them all.
DICT Lets you lookup words using online dictionaries.
FILE Read or write local files. curl does not support accessing
file:// URL remotely, but when running on Microsoft Windows
using the native UNC approach will work.
FTP(S) curl supports the File Transfer Protocol with a lot of tweaks
and levers. With or without using TLS.
GOPHER Retrieve files.
HTTP(S)
curl supports HTTP with numerous options and variations. It can
speak HTTP version 0.9, 1.0, 1.1, 2 and 3 depending on build
options and the correct command line options.
IMAP(S)
Using the mail reading protocol, curl can "download" emails for
you. With or without using TLS.
LDAP(S)
curl can do directory lookups for you, with or without TLS.
MQTT curl supports MQTT version 3. Downloading over MQTT equals
"subscribe" to a topic while uploading/posting equals "publish"
on a topic. MQTT support is experimental and TLS based MQTT is
not supported (yet).
POP3(S)
Downloading from a pop3 server means getting a mail. With or
without using TLS.
RTMP(S)
The Realtime Messaging Protocol is primarily used to server
streaming media and curl can download it.
RTSP curl supports RTSP 1.0 downloads.
SCP curl supports SSH version 2 scp transfers.
SFTP curl supports SFTP (draft 5) done over SSH version 2.
SMB(S) curl supports SMB version 1 for upload and download.
SMTP(S)
Uploading contents to an SMTP server means sending an email.
With or without TLS.
TELNET Telling curl to fetch a telnet URL starts an interactive session
where it sends what it reads on stdin and outputs what the
server sends it.
TFTP curl can do TFTP downloads and uploads.
PROGRESS METER
curl normally displays a progress meter during operations, indicating
the amount of transferred data, transfer speeds and estimated time
left, etc. The progress meter displays number of bytes and the speeds
are in bytes per second. The suffixes (k, M, G, T, P) are 1024 based.
For example 1k is 1024 bytes. 1M is 1048576 bytes.
curl displays this data to the terminal by default, so if you invoke
curl to do an operation and it is about to write data to the terminal,
it disables the progress meter as otherwise it would mess up the output
mixing progress meter and response data.
If you want a progress meter for HTTP POST or PUT requests, you need to
redirect the response output to a file, using shell redirect (>), -o,
--output or similar.
It is not the same case for FTP upload as that operation does not spit
out any response data to the terminal.
If you prefer a progress "bar" instead of the regular meter, -#,
--progress-bar is your friend. You can also disable the progress meter
completely with the -s, --silent option.
OPTIONS
Options start with one or two dashes. Many of the options require an
additional value next to them.
The short "single-dash" form of the options, -d for example, may be
used with or without a space between it and its value, although a space
is a recommended separator. The long "double-dash" form, -d, --data for
example, requires a space between it and its value.
Short version options that don't need any additional values can be used
immediately next to each other, like for example you can specify all
the options -O, -L and -v at once as -OLv.
In general, all boolean options are enabled with --option and yet again
disabled with --no-option. That is, you use the exact same option name
but prefix it with "no-". However, in this list we mostly only list and
show the --option version of them. (This concept with --no options was
added in 7.19.0. Previously most options were toggled on/off on
repeated use of the same command line option.)
--abstract-unix-socket <path>
(HTTP) Connect through an abstract Unix domain socket, instead
of using the network. Note: netstat shows the path of an
abstract socket prefixed with '@', however the <path> argument
should not have this leading character.
Added in 7.53.0.
--alt-svc <file name>
(HTTPS) WARNING: this option is experimental. Do not use in
production.
This option enables the alt-svc parser in curl. If the file name
points to an existing alt-svc cache file, that will be used.
After a completed transfer, the cache will be saved to the file
name again if it has been modified.
Specify a "" file name (zero length) to avoid loading/saving and
make curl just handle the cache in memory.
If this option is used several times, curl will load contents
from all the files but the last one will be used for saving.
Added in 7.64.1.
--anyauth
(HTTP) Tells curl to figure out authentication method by itself,
and use the most secure one the remote site claims to support.
This is done by first doing a request and checking the response-
headers, thus possibly inducing an extra network round-trip.
This is used instead of setting a specific authentication
method, which you can do with --basic, --digest, --ntlm, and
--negotiate.
Using --anyauth is not recommended if you do uploads from stdin,
since it may require data to be sent twice and then the client
must be able to rewind. If the need should arise when uploading
from stdin, the upload operation will fail.
Used together with -u, --user.
See also --proxy-anyauth, --basic and --digest.
-a, --append
(FTP SFTP) When used in an upload, this makes curl append to the
target file instead of overwriting it. If the remote file
doesn't exist, it will be created. Note that this flag is
ignored by some SFTP servers (including OpenSSH).
--aws-sigv4 <provider1[:provider2[:region[:service]]]>
Use AWS V4 signature authentication in the transfer.
The provider argument is a string that is used by the algorithm
when creating outgoing authentication headers.
The region argument is a string that points to a geographic area
of a resources collection (region-code) when the region name is
omitted from the endpoint.
The service argument is a string that points to a function
provided by a cloud (service-code) when the service name is
omitted from the endpoint.
Added in 7.75.0.
--basic
(HTTP) Tells curl to use HTTP Basic authentication with the
remote host. This is the default and this option is usually
pointless, unless you use it to override a previously set option
that sets a different authentication method (such as --ntlm,
--digest, or --negotiate).
Used together with -u, --user.
See also --proxy-basic.
--cacert <file>
(TLS) Tells curl to use the specified certificate file to verify
the peer. The file may contain multiple CA certificates. The
certificate(s) must be in PEM format. Normally curl is built to
use a default file for this, so this option is typically used to
alter that default file.
curl recognizes the environment variable named 'CURL_CA_BUNDLE'
if it is set, and uses the given path as a path to a CA cert
bundle. This option overrides that variable.
The windows version of curl will automatically look for a CA
certs file named 'curl-ca-bundle.crt', either in the same
directory as curl.exe, or in the Current Working Directory, or
in any folder along your PATH.
If curl is built against the NSS SSL library, the NSS PEM
PKCS#11 module (libnsspem.so) needs to be available for this
option to work properly.
(iOS and macOS only) If curl is built against Secure Transport,
then this option is supported for backward compatibility with
other SSL engines, but it should not be set. If the option is
not set, then curl will use the certificates in the system and
user Keychain to verify the peer, which is the preferred method
of verifying the peer's certificate chain.
(Schannel only) This option is supported for Schannel in Windows
7 or later with libcurl 7.60 or later. This option is supported
for backward compatibility with other SSL engines; instead it is
recommended to use Windows' store of root certificates (the
default for Schannel).
If this option is used several times, the last one will be used.
--capath <dir>
(TLS) Tells curl to use the specified certificate directory to
verify the peer. Multiple paths can be provided by separating
them with ":" (e.g. "path1:path2:path3"). The certificates must
be in PEM format, and if curl is built against OpenSSL, the
directory must have been processed using the c_rehash utility
supplied with OpenSSL. Using --capath can allow OpenSSL-powered
curl to make SSL-connections much more efficiently than using
--cacert if the --cacert file contains many CA certificates.
If this option is set, the default capath value will be ignored,
and if it is used several times, the last one will be used.
--cert-status
(TLS) Tells curl to verify the status of the server certificate
by using the Certificate Status Request (aka. OCSP stapling) TLS
extension.
If this option is enabled and the server sends an invalid (e.g.
expired) response, if the response suggests that the server
certificate has been revoked, or no response at all is received,
the verification fails.
This is currently only implemented in the OpenSSL, GnuTLS and
NSS backends.
Added in 7.41.0.
--cert-type <type>
(TLS) Tells curl what type the provided client certificate is
using. PEM, DER, ENG and P12 are recognized types. If not
specified, PEM is assumed.
If this option is used several times, the last one will be used.
See also -E, --cert, --key and --key-type.
-E, --cert <certificate[:password]>
(TLS) Tells curl to use the specified client certificate file
when getting a file with HTTPS, FTPS or another SSL-based
protocol. The certificate must be in PKCS#12 format if using
Secure Transport, or PEM format if using any other engine. If
the optional password isn't specified, it will be queried for on
the terminal. Note that this option assumes a "certificate" file
that is the private key and the client certificate concatenated!
See -E, --cert and --key to specify them independently.
If curl is built against the NSS SSL library then this option
can tell curl the nickname of the certificate to use within the
NSS database defined by the environment variable SSL_DIR (or by
default /etc/pki/nssdb). If the NSS PEM PKCS#11 module
(libnsspem.so) is available then PEM files may be loaded. If you
want to use a file from the current directory, please precede it
with "./" prefix, in order to avoid confusion with a nickname.
If the nickname contains ":", it needs to be preceded by "\" so
that it is not recognized as password delimiter. If the
nickname contains "\", it needs to be escaped as "\\" so that it
is not recognized as an escape character.
If curl is built against OpenSSL library, and the engine pkcs11
is available, then a PKCS#11 URI (RFC 7512) can be used to
specify a certificate located in a PKCS#11 device. A string
beginning with "pkcs11:" will be interpreted as a PKCS#11 URI.
If a PKCS#11 URI is provided, then the --engine option will be
set as "pkcs11" if none was provided and the --cert-type option
will be set as "ENG" if none was provided.
(iOS and macOS only) If curl is built against Secure Transport,
then the certificate string can either be the name of a
certificate/private key in the system or user keychain, or the
path to a PKCS#12-encoded certificate and private key. If you
want to use a file from the current directory, please precede it
with "./" prefix, in order to avoid confusion with a nickname.
(Schannel only) Client certificates must be specified by a path
expression to a certificate store. (Loading PFX is not
supported; you can import it to a store first). You can use
"<store location>\<store name>\<thumbprint>" to refer to a
certificate in the system certificates store, for example,
"CurrentUser\MY\934a7ac6f8a5d579285a74fa61e19f23ddfe8d7a".
Thumbprint is usually a SHA-1 hex string which you can see in
certificate details. Following store locations are supported:
CurrentUser, LocalMachine, CurrentService, Services,
CurrentUserGroupPolicy, LocalMachineGroupPolicy,
LocalMachineEnterprise.
If this option is used several times, the last one will be used.
See also --cert-type, --key and --key-type.
--ciphers <list of ciphers>
(TLS) Specifies which ciphers to use in the connection. The list
of ciphers must specify valid ciphers. Read up on SSL cipher
list details on this URL:
https://curl.se/docs/ssl-ciphers.html
If this option is used several times, the last one will be used.
--compressed-ssh
(SCP SFTP) Enables built-in SSH compression. This is a request,
not an order; the server may or may not do it.
Added in 7.56.0.
--compressed
(HTTP) Request a compressed response using one of the algorithms
curl supports, and automatically decompress the content. Headers
are not modified.
If this option is used and the server sends an unsupported
encoding, curl will report an error.
-K, --config <file>
Specify a text file to read curl arguments from. The command
line arguments found in the text file will be used as if they
were provided on the command line.
Options and their parameters must be specified on the same line
in the file, separated by whitespace, colon, or the equals sign.
Long option names can optionally be given in the config file
without the initial double dashes and if so, the colon or equals
characters can be used as separators. If the option is specified
with one or two dashes, there can be no colon or equals
character between the option and its parameter.
If the parameter contains whitespace (or starts with : or =),
the parameter must be enclosed within quotes. Within double
quotes, the following escape sequences are available: \\, \",
\t, \n, \r and \v. A backslash preceding any other letter is
ignored. If the first column of a config line is a '#'
character, the rest of the line will be treated as a comment.
Only write one option per physical line in the config file.
Specify the filename to -K, --config as '-' to make curl read
the file from stdin.
Note that to be able to specify a URL in the config file, you
need to specify it using the --url option, and not by simply
writing the URL on its own line. So, it could look similar to
this:
url = "https://curl.se/docs/"
When curl is invoked, it (unless -q, --disable is used) checks
for a default config file and uses it if found. The default
config file is checked for in the following places in this
order:
1) Use the CURL_HOME environment variable if set
2) Use the XDG_CONFIG_HOME environment variable if set (Added in
7.73.0)
3) Use the HOME environment variable if set
4) Non-windows: use getpwuid to find the home directory
5) Windows: use APPDATA if set
6) Windows: use "USERPROFILElication Data" if set
7) On windows, if there is no .curlrc file in the home dir, it
checks for one in the same dir the curl executable is placed. On
Unix-like systems, it will simply try to load .curlrc from the
determined home dir.
# --- Example file ---
# this is a comment
url = "example.com"
output = "curlhere.html"
user-agent = "superagent/1.0"
# and fetch another URL too
url = "example.com/docs/manpage.html"
-O
referer = "http://nowhereatall.example.com/"
# --- End of example file ---
This option can be used multiple times to load multiple config
files.
--connect-timeout <seconds>
Maximum time in seconds that you allow curl's connection to
take. This only limits the connection phase, so if curl
connects within the given period it will continue - if not it
will exit. Since version 7.32.0, this option accepts decimal
values.
If this option is used several times, the last one will be used.
See also -m, --max-time.
--connect-to <HOST1:PORT1:HOST2:PORT2>
For a request to the given HOST1:PORT1 pair, connect to
HOST2:PORT2 instead. This option is suitable to direct requests
at a specific server, e.g. at a specific cluster node in a
cluster of servers. This option is only used to establish the
network connection. It does NOT affect the hostname/port that is
used for TLS/SSL (e.g. SNI, certificate verification) or for the
application protocols. "HOST1" and "PORT1" may be the empty
string, meaning "any host/port". "HOST2" and "PORT2" may also be
the empty string, meaning "use the request's original
host/port".
A "host" specified to this option is compared as a string, so it
needs to match the name used in request URL. It can be either
numerical such as "127.0.0.1" or the full host name such as
"example.org".
This option can be used many times to add many connect rules.
See also --resolve and -H, --header. Added in 7.49.0.
-C, --continue-at <offset>
Continue/Resume a previous file transfer at the given offset.
The given offset is the exact number of bytes that will be
skipped, counting from the beginning of the source file before
it is transferred to the destination. If used with uploads, the
FTP server command SIZE will not be used by curl.
Use "-C -" to tell curl to automatically find out where/how to
resume the transfer. It then uses the given output/input files
to figure that out.
If this option is used several times, the last one will be used.
See also -r, --range.
-c, --cookie-jar <filename>
(HTTP) Specify to which file you want curl to write all cookies
after a completed operation. Curl writes all cookies from its
in-memory cookie storage to the given file at the end of
operations. If no cookies are known, no data will be written.
The file will be written using the Netscape cookie file format.
If you set the file name to a single dash, "-", the cookies will
be written to stdout.
This command line option will activate the cookie engine that
makes curl record and use cookies. Another way to activate it is
to use the -b, --cookie option.
If the cookie jar can't be created or written to, the whole curl
operation won't fail or even report an error clearly. Using -v,
--verbose will get a warning displayed, but that is the only
visible feedback you get about this possibly lethal situation.
If this option is used several times, the last specified file
name will be used.
-b, --cookie <data|filename>
(HTTP) Pass the data to the HTTP server in the Cookie header. It
is supposedly the data previously received from the server in a
"Set-Cookie:" line. The data should be in the format
"NAME1=VALUE1; NAME2=VALUE2".
If no '=' symbol is used in the argument, it is instead treated
as a filename to read previously stored cookie from. This option
also activates the cookie engine which will make curl record
incoming cookies, which may be handy if you're using this in
combination with the -L, --location option or do multiple URL
transfers on the same invoke. If the file name is exactly a
minus ("-"), curl will instead read the contents from stdin.
The file format of the file to read cookies from should be plain
HTTP headers (Set-Cookie style) or the Netscape/Mozilla cookie
file format.
The file specified with -b, --cookie is only used as input. No
cookies will be written to the file. To store cookies, use the
-c, --cookie-jar option.
If you use the Set-Cookie file format and don't specify a domain
then the cookie is not sent since the domain will never match.
To address this, set a domain in Set-Cookie line (doing that
will include sub-domains) or preferably: use the Netscape
format.
This option can be used multiple times.
Users very often want to both read cookies from a file and write
updated cookies back to a file, so using both -b, --cookie and
-c, --cookie-jar in the same command line is common.
--create-dirs
When used in conjunction with the -o, --output option, curl will
create the necessary local directory hierarchy as needed. This
option creates the dirs mentioned with the -o, --output option,
nothing else. If the --output file name uses no dir or if the
dirs it mentions already exist, no dir will be created.
Created dirs are made with mode 0750 on unix style file systems.
To create remote directories when using FTP or SFTP, try --ftp-
create-dirs.
--create-file-mode <mode>
(SFTP SCP FILE) When curl is used to create files remotely using
one of the supported protocols, this option allows the user to
set which 'mode' to set on the file at creation time, instead of
the default 0644.
This option takes an octal number as argument.
See also --ftp-create-dirs. Added in 7.75.0.
--crlf (FTP SMTP) Convert LF to CRLF in upload. Useful for MVS
(OS/390).
(SMTP added in 7.40.0)
--crlfile <file>
(TLS) Provide a file using PEM format with a Certificate
Revocation List that may specify peer certificates that are to
be considered revoked.
If this option is used several times, the last one will be used.
Added in 7.19.7.
--curves <algorithm list>
(TLS) Tells curl to request specific curves to use during SSL
session establishment according to RFC 8422, 5.1. Multiple
algorithms can be provided by separating them with ":" (e.g.
"X25519:P-521"). The parameter is available identically in the
"openssl s_client/s_server" utilities.
--curves allows a OpenSSL powered curl to make SSL-connections
with exactly the (EC) curve requested by the client, avoiding
intransparent client/server negotiations.
If this option is set, the default curves list built into
openssl will be ignored.
Added in 7.73.0.
--data-ascii <data>
(HTTP) This is just an alias for -d, --data.
--data-binary <data>
(HTTP) This posts data exactly as specified with no extra
processing whatsoever.
If you start the data with the letter @, the rest should be a
filename. Data is posted in a similar manner as -d, --data
does, except that newlines and carriage returns are preserved
and conversions are never done.
Like -d, --data the default content-type sent to the server is
application/x-www-form-urlencoded. If you want the data to be
treated as arbitrary binary data by the server then set the
content-type to octet-stream: -H "Content-Type:
application/octet-stream".
If this option is used several times, the ones following the
first will append data as described in -d, --data.
--data-raw <data>
(HTTP) This posts data similarly to -d, --data but without the
special interpretation of the @ character.
See also -d, --data. Added in 7.43.0.
--data-urlencode <data>
(HTTP) This posts data, similar to the other -d, --data options
with the exception that this performs URL-encoding.
To be CGI-compliant, the <data> part should begin with a name
followed by a separator and a content specification. The <data>
part can be passed to curl using one of the following syntaxes:
content
This will make curl URL-encode the content and pass that
on. Just be careful so that the content doesn't contain
any = or @ symbols, as that will then make the syntax
match one of the other cases below!
=content
This will make curl URL-encode the content and pass that
on. The preceding = symbol is not included in the data.
name=content
This will make curl URL-encode the content part and pass
that on. Note that the name part is expected to be URL-
encoded already.
@filename
This will make curl load data from the given file
(including any newlines), URL-encode that data and pass
it on in the POST.
name@filename
This will make curl load data from the given file
(including any newlines), URL-encode that data and pass
it on in the POST. The name part gets an equal sign
appended, resulting in name=urlencoded-file-content. Note
that the name is expected to be URL-encoded already.
See also -d, --data and --data-raw. Added in 7.18.0.
-d, --data <data>
(HTTP MQTT) Sends the specified data in a POST request to the
HTTP server, in the same way that a browser does when a user has
filled in an HTML form and presses the submit button. This will
cause curl to pass the data to the server using the content-type
application/x-www-form-urlencoded. Compare to -F, --form.
--data-raw is almost the same but does not have a special
interpretation of the @ character. To post data purely binary,
you should instead use the --data-binary option. To URL-encode
the value of a form field you may use --data-urlencode.
If any of these options is used more than once on the same
command line, the data pieces specified will be merged together
with a separating &-symbol. Thus, using '-d name=daniel -d
skill=lousy' would generate a post chunk that looks like
'name=daniel&skill=lousy'.
If you start the data with the letter @, the rest should be a
file name to read the data from, or - if you want curl to read
the data from stdin. Posting data from a file named 'foobar'
would thus be done with -d, --data @foobar. When -d, --data is
told to read from a file like that, carriage returns and
newlines will be stripped out. If you don't want the @ character
to have a special interpretation use --data-raw instead.
See also --data-binary, --data-urlencode and --data-raw. This
option overrides -F, --form and -I, --head and -T, --upload-
file.
--delegation <LEVEL>
(GSS/kerberos) Set LEVEL to tell the server what it is allowed
to delegate when it comes to user credentials.
none Don't allow any delegation.
policy Delegates if and only if the OK-AS-DELEGATE flag is set
in the Kerberos service ticket, which is a matter of
realm policy.
always Unconditionally allow the server to delegate.
--digest
(HTTP) Enables HTTP Digest authentication. This is an
authentication scheme that prevents the password from being sent
over the wire in clear text. Use this in combination with the
normal -u, --user option to set user name and password.
If this option is used several times, only the first one is
used.
See also -u, --user, --proxy-digest and --anyauth. This option
overrides --basic and --ntlm and --negotiate.
--disable-eprt
(FTP) Tell curl to disable the use of the EPRT and LPRT commands
when doing active FTP transfers. Curl will normally always first
attempt to use EPRT, then LPRT before using PORT, but with this
option, it will use PORT right away. EPRT and LPRT are
extensions to the original FTP protocol, and may not work on all
servers, but they enable more functionality in a better way than
the traditional PORT command.
--eprt can be used to explicitly enable EPRT again and --no-eprt
is an alias for --disable-eprt.
If the server is accessed using IPv6, this option will have no
effect as EPRT is necessary then.
Disabling EPRT only changes the active behavior. If you want to
switch to passive mode you need to not use -P, --ftp-port or
force it with --ftp-pasv.
--disable-epsv
(FTP) (FTP) Tell curl to disable the use of the EPSV command
when doing passive FTP transfers. Curl will normally always
first attempt to use EPSV before PASV, but with this option, it
will not try using EPSV.
--epsv can be used to explicitly enable EPSV again and --no-epsv
is an alias for --disable-epsv.
If the server is an IPv6 host, this option will have no effect
as EPSV is necessary then.
Disabling EPSV only changes the passive behavior. If you want to
switch to active mode you need to use -P, --ftp-port.
-q, --disable
If used as the first parameter on the command line, the curlrc
config file will not be read and used. See the -K, --config for
details on the default config file search path.
--disallow-username-in-url
(HTTP) This tells curl to exit if passed a url containing a
username.
See also --proto. Added in 7.61.0.
--dns-interface <interface>
(DNS) Tell curl to send outgoing DNS requests through
<interface>. This option is a counterpart to --interface (which
does not affect DNS). The supplied string must be an interface
name (not an address).
See also --dns-ipv4-addr and --dns-ipv6-addr. --dns-interface
requires that the underlying libcurl was built to support c-
ares. Added in 7.33.0.
--dns-ipv4-addr <address>
(DNS) Tell curl to bind to <ip-address> when making IPv4 DNS
requests, so that the DNS requests originate from this address.
The argument should be a single IPv4 address.
See also --dns-interface and --dns-ipv6-addr. --dns-ipv4-addr
requires that the underlying libcurl was built to support c-
ares. Added in 7.33.0.
--dns-ipv6-addr <address>
(DNS) Tell curl to bind to <ip-address> when making IPv6 DNS
requests, so that the DNS requests originate from this address.
The argument should be a single IPv6 address.
See also --dns-interface and --dns-ipv4-addr. --dns-ipv6-addr
requires that the underlying libcurl was built to support c-
ares. Added in 7.33.0.
--dns-servers <addresses>
Set the list of DNS servers to be used instead of the system
default. The list of IP addresses should be separated with
commas. Port numbers may also optionally be given as :<port-
number> after each IP address.
--dns-servers requires that the underlying libcurl was built to
support c-ares. Added in 7.33.0.
--doh-cert-status
(all) Same as --cert-status but used for DOH (DNS-over-HTTPS).
Added in 7.76.0.
--doh-insecure
(all) Same as -k, --insecure but used for DOH (DNS-over-HTTPS).
Added in 7.76.0.
--doh-url <URL>
(all) Specifies which DNS-over-HTTPS (DOH) server to use to
resolve hostnames, instead of using the default name resolver
mechanism. The URL must be HTTPS.
Some SSL options that you set for your transfer will apply to
DOH since the name lookups take place over SSL. However, the
certificate verification settings are not inherited and can be
controlled separately via --doh-insecure and --doh-cert-status.
If this option is used several times, the last one will be used.
Added in 7.62.0.
-D, --dump-header <filename>
(HTTP FTP) Write the received protocol headers to the specified
file.
This option is handy to use when you want to store the headers
that an HTTP site sends to you. Cookies from the headers could
then be read in a second curl invocation by using the -b,
--cookie option! The -c, --cookie-jar option is a better way to
store cookies.
If no headers are received, the use of this option will create
an empty file.
When used in FTP, the FTP server response lines are considered
being "headers" and thus are saved there.
If this option is used several times, the last one will be used.
See also -o, --output.
--egd-file <file>
(TLS) Specify the path name to the Entropy Gathering Daemon
socket. The socket is used to seed the random engine for SSL
connections.
See also --random-file.
--engine <name>
(TLS) Select the OpenSSL crypto engine to use for cipher
operations. Use --engine list to print a list of build-time
supported engines. Note that not all (or none) of the engines
may be available at run-time.
--etag-compare <file>
(HTTP) This option makes a conditional HTTP request for the
specific ETag read from the given file by sending a custom If-
None-Match header using the extracted ETag.
For correct results, make sure that specified file contains only
a single line with a desired ETag. An empty file is parsed as an
empty ETag.
Use the option --etag-save to first save the ETag from a
response, and then use this option to compare using the saved
ETag in a subsequent request.
COMPARISON: There are 2 types of comparison or ETags: Weak and
Strong. This option expects, and uses a strong comparison.
Added in 7.68.0.
--etag-save <file>
(HTTP) This option saves an HTTP ETag to the specified file.
Etag is usually part of headers returned by a request. When
server sends an ETag, it must be enveloped by a double quote.
This option extracts the ETag without the double quotes and
saves it into the <file>.
A server can send a weak ETag which is prefixed by "W/". This
identifier is not considered, and only relevant ETag between
quotation marks is parsed.
It an ETag wasn't sent by the server or it cannot be parsed, an
empty file is created.
Added in 7.68.0.
--expect100-timeout <seconds>
(HTTP) Maximum time in seconds that you allow curl to wait for a
100-continue response when curl emits an Expects: 100-continue
header in its request. By default curl will wait one second.
This option accepts decimal values! When curl stops waiting, it
will continue as if the response has been received.
See also --connect-timeout. Added in 7.47.0.
--fail-early
Fail and exit on the first detected transfer error.
When curl is used to do multiple transfers on the command line,
it will attempt to operate on each given URL, one by one. By
default, it will ignore errors if there are more URLs given and
the last URL's success will determine the error code curl
returns. So early failures will be "hidden" by subsequent
successful transfers.
Using this option, curl will instead return an error on the
first transfer that fails, independent of the amount of URLs
that are given on the command line. This way, no transfer
failures go undetected by scripts and similar.
This option is global and does not need to be specified for each
use of -:, --next.
This option does not imply -f, --fail, which causes transfers to
fail due to the server's HTTP status code. You can combine the
two options, however note -f, --fail is not global and is
therefore contained by -:, --next.
Added in 7.52.0.
--fail-with-body
(HTTP) Return an error on server errors where the HTTP response
code is 400 or greater). In normal cases when an HTTP server
fails to deliver a document, it returns an HTML document stating
so (which often also describes why and more). This flag will
still allow curl to output and save that content but also to
return error 22.
This is an alternative option to -f, --fail which makes curl
fail for the same circumstances but without saving the content.
See also -f, --fail. Added in 7.76.0.
-f, --fail
(HTTP) Fail silently (no output at all) on server errors. This
is mostly done to enable scripts etc to better deal with failed
attempts. In normal cases when an HTTP server fails to deliver a
document, it returns an HTML document stating so (which often
also describes why and more). This flag will prevent curl from
outputting that and return error 22.
This method is not fail-safe and there are occasions where non-
successful response codes will slip through, especially when
authentication is involved (response codes 401 and 407).
See also --fail-with-body.
--false-start
(TLS) Tells curl to use false start during the TLS handshake.
False start is a mode where a TLS client will start sending
application data before verifying the server's Finished message,
thus saving a round trip when performing a full handshake.
This is currently only implemented in the NSS and Secure
Transport (on iOS 7.0 or later, or OS X 10.9 or later) backends.
Added in 7.42.0.
--form-string <name=string>
(HTTP SMTP IMAP) Similar to -F, --form except that the value
string for the named parameter is used literally. Leading '@'
and '<' characters, and the ';type=' string in the value have no
special meaning. Use this in preference to -F, --form if there's
any possibility that the string value may accidentally trigger
the '@' or '<' features of -F, --form.
See also -F, --form.
-F, --form <name=content>
(HTTP SMTP IMAP) For HTTP protocol family, this lets curl
emulate a filled-in form in which a user has pressed the submit
button. This causes curl to POST data using the Content-Type
multipart/form-data according to RFC 2388.
For SMTP and IMAP protocols, this is the mean to compose a
multipart mail message to transmit.
This enables uploading of binary files etc. To force the
'content' part to be a file, prefix the file name with an @
sign. To just get the content part from a file, prefix the file
name with the symbol <. The difference between @ and < is then
that @ makes a file get attached in the post as a file upload,
while the < makes a text field and just get the contents for
that text field from a file.
Tell curl to read content from stdin instead of a file by using
- as filename. This goes for both @ and < constructs. When stdin
is used, the contents is buffered in memory first by curl to
determine its size and allow a possible resend. Defining a
part's data from a named non-regular file (such as a named pipe
or similar) is unfortunately not subject to buffering and will
be effectively read at transmission time; since the full size is
unknown before the transfer starts, such data is sent as chunks
by HTTP and rejected by IMAP.
Example: send an image to an HTTP server, where 'profile' is the
name of the form-field to which the file portrait.jpg will be
the input:
curl -F profile=@portrait.jpg https://example.com/upload.cgi
Example: send your name and shoe size in two text fields to the
server:
curl -F name=John -F shoesize=11 https://example.com/
Example: send your essay in a text field to the server. Send it
as a plain text field, but get the contents for it from a local
file:
curl -F "story=<hugefile.txt" https://example.com/
You can also tell curl what Content-Type to use by using
'type=', in a manner similar to:
curl -F "web=@index.html;type=text/html" example.com
or
curl -F "name=daniel;type=text/foo" example.com
You can also explicitly change the name field of a file upload
part by setting filename=, like this:
curl -F "file=@localfile;filename=nameinpost" example.com
If filename/path contains ',' or ';', it must be quoted by
double-quotes like:
curl -F "file=@\"localfile\";filename=\"nameinpost\""
example.com
or
curl -F 'file=@"localfile";filename="nameinpost"' example.com
Note that if a filename/path is quoted by double-quotes, any
double-quote or backslash within the filename must be escaped by
backslash.
Quoting must also be applied to non-file data if it contains
semicolons, leading/trailing spaces or leading double quotes:
curl -F 'colors="red; green; blue";type=text/x-myapp'
example.com
You can add custom headers to the field by setting headers=,
like
curl -F "submit=OK;headers=\"X-submit-type: OK\"" example.com
or
curl -F "submit=OK;headers=@headerfile" example.com
The headers= keyword may appear more that once and above notes
about quoting apply. When headers are read from a file, Empty
lines and lines starting with '#' are comments and ignored; each
header can be folded by splitting between two words and starting
the continuation line with a space; embedded carriage-returns
and trailing spaces are stripped. Here is an example of a
header file contents:
# This file contain two headers.
X-header-1: this is a header
# The following header is folded.
X-header-2: this is
another header
To support sending multipart mail messages, the syntax is
extended as follows:
- name can be omitted: the equal sign is the first character of
the argument,
- if data starts with '(', this signals to start a new
multipart: it can be followed by a content type specification.
- a multipart can be terminated with a '=)' argument.
Example: the following command sends an SMTP mime e-mail
consisting in an inline part in two alternative formats: plain
text and HTML. It attaches a text file:
curl -F '=(;type=multipart/alternative' \
-F '=plain text message' \
-F '= <body>HTML message</body>;type=text/html' \
-F '=)' -F '=@textfile.txt' ... smtp://example.com
Data can be encoded for transfer using encoder=. Available
encodings are binary and 8bit that do nothing else than adding
the corresponding Content-Transfer-Encoding header, 7bit that
only rejects 8-bit characters with a transfer error, quoted-
printable and base64 that encodes data according to the
corresponding schemes, limiting lines length to 76 characters.
Example: send multipart mail with a quoted-printable text
message and a base64 attached file:
curl -F '=text message;encoder=quoted-printable' \
-F '=@localfile;encoder=base64' ... smtp://example.com
See further examples and details in the MANUAL.
This option can be used multiple times.
This option overrides -d, --data and -I, --head and -T,
--upload-file.
--ftp-account <data>
(FTP) When an FTP server asks for "account data" after user name
and password has been provided, this data is sent off using the
ACCT command.
If this option is used several times, the last one will be used.
Added in 7.13.0.
--ftp-alternative-to-user <command>
(FTP) If authenticating with the USER and PASS commands fails,
send this command. When connecting to Tumbleweed's Secure
Transport server over FTPS using a client certificate, using
"SITE AUTH" will tell the server to retrieve the username from
the certificate.
Added in 7.15.5.
--ftp-create-dirs
(FTP SFTP) When an FTP or SFTP URL/operation uses a path that
doesn't currently exist on the server, the standard behavior of
curl is to fail. Using this option, curl will instead attempt to
create missing directories.
See also --create-dirs.
--ftp-method <method>
(FTP) Control what method curl should use to reach a file on an
FTP(S) server. The method argument should be one of the
following alternatives:
multicwd
curl does a single CWD operation for each path part in
the given URL. For deep hierarchies this means very many
commands. This is how RFC 1738 says it should be done.
This is the default but the slowest behavior.
nocwd curl does no CWD at all. curl will do SIZE, RETR, STOR
etc and give a full path to the server for all these
commands. This is the fastest behavior.
singlecwd
curl does one CWD with the full target directory and then
operates on the file "normally" (like in the multicwd
case). This is somewhat more standards compliant than
'nocwd' but without the full penalty of 'multicwd'.
Added in 7.15.1.
--ftp-pasv
(FTP) Use passive mode for the data connection. Passive is the
internal default behavior, but using this option can be used to
override a previous -P, --ftp-port option.
If this option is used several times, only the first one is
used. Undoing an enforced passive really isn't doable but you
must then instead enforce the correct -P, --ftp-port again.
Passive mode means that curl will try the EPSV command first and
then PASV, unless --disable-epsv is used.
See also --disable-epsv. Added in 7.11.0.
-P, --ftp-port <address>
(FTP) Reverses the default initiator/listener roles when
connecting with FTP. This option makes curl use active mode.
curl then tells the server to connect back to the client's
specified address and port, while passive mode asks the server
to setup an IP address and port for it to connect to. <address>
should be one of:
interface
e.g. "eth0" to specify which interface's IP address you
want to use (Unix only)
IP address
e.g. "192.168.10.1" to specify the exact IP address
host name
e.g. "my.host.domain" to specify the machine
- make curl pick the same IP address that is already used
for the control connection
If this option is used several times, the last one will be used.
Disable the use of PORT with --ftp-pasv. Disable the attempt to use the
EPRT command instead of PORT by using --disable-eprt. EPRT is really
PORT++.
Since 7.19.5, you can append ":[start]-[end]" to the right of the
address, to tell curl what TCP port range to use. That means you
specify a port range, from a lower to a higher number. A single number
works as well, but do note that it increases the risk of failure since
the port may not be available.
See also --ftp-pasv and --disable-eprt.
--ftp-pret
(FTP) Tell curl to send a PRET command before PASV (and EPSV).
Certain FTP servers, mainly drftpd, require this non-standard
command for directory listings as well as up and downloads in
PASV mode.
Added in 7.20.0.
--ftp-skip-pasv-ip
(FTP) Tell curl to not use the IP address the server suggests in
its response to curl's PASV command when curl connects the data
connection. Instead curl will re-use the same IP address it
already uses for the control connection.
Since curl 7.74.0 this option is enabled by default.
This option has no effect if PORT, EPRT or EPSV is used instead
of PASV.
See also --ftp-pasv. Added in 7.14.2.
--ftp-ssl-ccc-mode <active/passive>
(FTP) Sets the CCC mode. The passive mode will not initiate the
shutdown, but instead wait for the server to do it, and will not
reply to the shutdown from the server. The active mode initiates
the shutdown and waits for a reply from the server.
See also --ftp-ssl-ccc. Added in 7.16.2.
--ftp-ssl-ccc
(FTP) Use CCC (Clear Command Channel) Shuts down the SSL/TLS
layer after authenticating. The rest of the control channel
communication will be unencrypted. This allows NAT routers to
follow the FTP transaction. The default mode is passive.
See also --ssl and --ftp-ssl-ccc-mode. Added in 7.16.1.
--ftp-ssl-control
(FTP) Require SSL/TLS for the FTP login, clear for transfer.
Allows secure authentication, but non-encrypted data transfers
for efficiency. Fails the transfer if the server doesn't
support SSL/TLS.
Added in 7.16.0.
-G, --get
When used, this option will make all data specified with -d,
--data, --data-binary or --data-urlencode to be used in an HTTP
GET request instead of the POST request that otherwise would be
used. The data will be appended to the URL with a '?' separator.
If used in combination with -I, --head, the POST data will
instead be appended to the URL with a HEAD request.
If this option is used several times, only the first one is
used. This is because undoing a GET doesn't make sense, but you
should then instead enforce the alternative method you prefer.
-g, --globoff
This option switches off the "URL globbing parser". When you set
this option, you can specify URLs that contain the letters {}[]
without having them being interpreted by curl itself. Note that
these letters are not normal legal URL contents but they should
be encoded according to the URI standard.
--happy-eyeballs-timeout-ms <milliseconds>
Happy eyeballs is an algorithm that attempts to connect to both
IPv4 and IPv6 addresses for dual-stack hosts, preferring IPv6
first for the number of milliseconds. If the IPv6 address cannot
be connected to within that time then a connection attempt is
made to the IPv4 address in parallel. The first connection to be
established is the one that is used.
The range of suggested useful values is limited. Happy Eyeballs
RFC 6555 says "It is RECOMMENDED that connection attempts be
paced 150-250 ms apart to balance human factors against network
load." libcurl currently defaults to 200 ms. Firefox and Chrome
currently default to 300 ms.
If this option is used several times, the last one will be used.
Added in 7.59.0.
--haproxy-protocol
(HTTP) Send a HAProxy PROXY protocol v1 header at the beginning
of the connection. This is used by some load balancers and
reverse proxies to indicate the client's true IP address and
port.
This option is primarily useful when sending test requests to a
service that expects this header.
Added in 7.60.0.
-I, --head
(HTTP FTP FILE) Fetch the headers only! HTTP-servers feature the
command HEAD which this uses to get nothing but the header of a
document. When used on an FTP or FILE file, curl displays the
file size and last modification time only.
-H, --header <header/@file>
(HTTP) Extra header to include in the request when sending HTTP
to a server. You may specify any number of extra headers. Note
that if you should add a custom header that has the same name as
one of the internal ones curl would use, your externally set
header will be used instead of the internal one. This allows you
to make even trickier stuff than curl would normally do. You
should not replace internally set headers without knowing
perfectly well what you're doing. Remove an internal header by
giving a replacement without content on the right side of the
colon, as in: -H "Host:". If you send the custom header with no-
value then its header must be terminated with a semicolon, such
as -H "X-Custom-Header;" to send "X-Custom-Header:".
curl will make sure that each header you add/replace is sent
with the proper end-of-line marker, you should thus not add that
as a part of the header content: do not add newlines or carriage
returns, they will only mess things up for you.
This option can take an argument in @filename style, which then
adds a header for each line in the input file. Using @- will
make curl read the header file from stdin. Added in 7.55.0.
You need --proxy-header to send custom headers intended for a
HTTP proxy. Added in 7.37.0.
Passing on a "Transfer-Encoding: chunked" header when doing a
HTTP request with a request body, will make curl send the data
using chunked encoding.
Example:
curl -H "X-First-Name: Joe" http://example.com/
WARNING: headers set with this option will be set in all
requests - even after redirects are followed, like when told
with -L, --location. This can lead to the header being sent to
other hosts than the original host, so sensitive headers should
be used with caution combined with following redirects.
This option can be used multiple times to add/replace/remove
multiple headers.
See also -A, --user-agent and -e, --referer.
-h, --help <category>
Usage help. This lists all commands of the <category>. If no
arg was provided, curl will display the most important command
line arguments. If the argument "all" was provided, curl will
display all options available. If the argument "category" was
provided, curl will display all categories and their meanings.
--hostpubmd5 <md5>
(SFTP SCP) Pass a string containing 32 hexadecimal digits. The
string should be the 128 bit MD5 checksum of the remote host's
public key, curl will refuse the connection with the host unless
the md5sums match.
Added in 7.17.1.
--hsts <file name>
(HTTPS) WARNING: this option is experimental. Do not use in
production.
This option enables HSTS for the transfer. If the file name
points to an existing HSTS cache file, that will be used. After
a completed transfer, the cache will be saved to the file name
again if it has been modified.
Specify a "" file name (zero length) to avoid loading/saving and
make curl just handle HSTS in memory.
If this option is used several times, curl will load contents
from all the files but the last one will be used for saving.
Added in 7.74.0.
--http0.9
(HTTP) Tells curl to be fine with HTTP version 0.9 response.
HTTP/0.9 is a completely headerless response and therefore you
can also connect with this to non-HTTP servers and still get a
response since curl will simply transparently downgrade - if
allowed.
Since curl 7.66.0, HTTP/0.9 is disabled by default.
-0, --http1.0
(HTTP) Tells curl to use HTTP version 1.0 instead of using its
internally preferred HTTP version.
This option overrides --http1.1 and --http2.
--http1.1
(HTTP) Tells curl to use HTTP version 1.1.
This option overrides -0, --http1.0 and --http2. Added in
7.33.0.
--http2-prior-knowledge
(HTTP) Tells curl to issue its non-TLS HTTP requests using
HTTP/2 without HTTP/1.1 Upgrade. It requires prior knowledge
that the server supports HTTP/2 straight away. HTTPS requests
will still do HTTP/2 the standard way with negotiated protocol
version in the TLS handshake.
--http2-prior-knowledge requires that the underlying libcurl was
built to support HTTP/2. This option overrides --http1.1 and -0,
--http1.0 and --http2. Added in 7.49.0.
--http2
(HTTP) Tells curl to use HTTP version 2.
See also --http1.1 and --http3. --http2 requires that the
underlying libcurl was built to support HTTP/2. This option
overrides --http1.1 and -0, --http1.0 and --http2-prior-
knowledge. Added in 7.33.0.
--http3
(HTTP) WARNING: this option is experimental. Do not use in
production.
Tells curl to use HTTP version 3 directly to the host and port
number used in the URL. A normal HTTP/3 transaction will be done
to a host and then get redirected via Alt-SVc, but this option
allows a user to circumvent that when you know that the target
speaks HTTP/3 on the given host and port.
This option will make curl fail if a QUIC connection cannot be
established, it cannot fall back to a lower HTTP version on its
own.
See also --http1.1 and --http2. --http3 requires that the
underlying libcurl was built to support HTTP/3. This option
overrides --http1.1 and -0, --http1.0 and --http2 and
--http2-prior-knowledge. Added in 7.66.0.
--ignore-content-length
(FTP HTTP) For HTTP, Ignore the Content-Length header. This is
particularly useful for servers running Apache 1.x, which will
report incorrect Content-Length for files larger than 2
gigabytes.
For FTP (since 7.46.0), skip the RETR command to figure out the
size before downloading a file.
-i, --include
Include the HTTP response headers in the output. The HTTP
response headers can include things like server name, cookies,
date of the document, HTTP version and more...
To view the request headers, consider the -v, --verbose option.
See also -v, --verbose.
-k, --insecure
(TLS) By default, every SSL connection curl makes is verified to
be secure. This option allows curl to proceed and operate even
for server connections otherwise considered insecure.
The server connection is verified by making sure the server's
certificate contains the right name and verifies successfully
using the cert store.
See this online resource for further details:
https://curl.se/docs/sslcerts.html
See also --proxy-insecure and --cacert.
--interface <name>
Perform an operation using a specified interface. You can enter
interface name, IP address or host name. An example could look
like:
curl --interface eth0:1 https://www.example.com/
If this option is used several times, the last one will be used.
On Linux it can be used to specify a VRF, but the binary needs
to either have CAP_NET_RAW or to be run as root. More
information about Linux VRF:
https://www.kernel.org/doc/Documentation/networking/vrf.txt
See also --dns-interface.
-4, --ipv4
This option tells curl to resolve names to IPv4 addresses only,
and not for example try IPv6.
See also --http1.1 and --http2. This option overrides -6,
--ipv6.
-6, --ipv6
This option tells curl to resolve names to IPv6 addresses only,
and not for example try IPv4.
See also --http1.1 and --http2. This option overrides -4,
--ipv4.
-j, --junk-session-cookies
(HTTP) When curl is told to read cookies from a given file, this
option will make it discard all "session cookies". This will
basically have the same effect as if a new session is started.
Typical browsers always discard session cookies when they're
closed down.
See also -b, --cookie and -c, --cookie-jar.
--keepalive-time <seconds>
This option sets the time a connection needs to remain idle
before sending keepalive probes and the time between individual
keepalive probes. It is currently effective on operating systems
offering the TCP_KEEPIDLE and TCP_KEEPINTVL socket options
(meaning Linux, recent AIX, HP-UX and more). This option has no
effect if --no-keepalive is used.
If this option is used several times, the last one will be used.
If unspecified, the option defaults to 60 seconds.
Added in 7.18.0.
--key-type <type>
(TLS) Private key file type. Specify which type your --key
provided private key is. DER, PEM, and ENG are supported. If not
specified, PEM is assumed.
If this option is used several times, the last one will be used.
--key <key>
(TLS SSH) Private key file name. Allows you to provide your
private key in this separate file. For SSH, if not specified,
curl tries the following candidates in order: '~/.ssh/id_rsa',
'~/.ssh/id_dsa', './id_rsa', './id_dsa'.
If curl is built against OpenSSL library, and the engine pkcs11
is available, then a PKCS#11 URI (RFC 7512) can be used to
specify a private key located in a PKCS#11 device. A string
beginning with "pkcs11:" will be interpreted as a PKCS#11 URI.
If a PKCS#11 URI is provided, then the --engine option will be
set as "pkcs11" if none was provided and the --key-type option
will be set as "ENG" if none was provided.
If this option is used several times, the last one will be used.
--krb <level>
(FTP) Enable Kerberos authentication and use. The level must be
entered and should be one of 'clear', 'safe', 'confidential', or
'private'. Should you use a level that is not one of these,
'private' will instead be used.
If this option is used several times, the last one will be used.
--krb requires that the underlying libcurl was built to support
Kerberos.
--libcurl <file>
Append this option to any ordinary curl command line, and you
will get a libcurl-using C source code written to the file that
does the equivalent of what your command-line operation does!
If this option is used several times, the last given file name
will be used.
Added in 7.16.1.
--limit-rate <speed>
Specify the maximum transfer rate you want curl to use - for
both downloads and uploads. This feature is useful if you have a
limited pipe and you'd like your transfer not to use your entire
bandwidth. To make it slower than it otherwise would be.
The given speed is measured in bytes/second, unless a suffix is
appended. Appending 'k' or 'K' will count the number as
kilobytes, 'm' or 'M' makes it megabytes, while 'g' or 'G' makes
it gigabytes. Examples: 200K, 3m and 1G.
If you also use the -Y, --speed-limit option, that option will
take precedence and might cripple the rate-limiting slightly, to
help keeping the speed-limit logic working.
If this option is used several times, the last one will be used.
-l, --list-only
(FTP POP3) (FTP) When listing an FTP directory, this switch
forces a name-only view. This is especially useful if the user
wants to machine-parse the contents of an FTP directory since
the normal directory view doesn't use a standard look or format.
When used like this, the option causes a NLST command to be sent
to the server instead of LIST.
Note: Some FTP servers list only files in their response to
NLST; they do not include sub-directories and symbolic links.
(POP3) When retrieving a specific email from POP3, this switch
forces a LIST command to be performed instead of RETR. This is
particularly useful if the user wants to see if a specific
message id exists on the server and what size it is.
Note: When combined with -X, --request, this option can be used
to send an UIDL command instead, so the user may use the email's
unique identifier rather than it's message id to make the
request.
Added in 4.0.
--local-port <num/range>
Set a preferred single number or range (FROM-TO) of local port
numbers to use for the connection(s). Note that port numbers by
nature are a scarce resource that will be busy at times so
setting this range to something too narrow might cause
unnecessary connection setup failures.
Added in 7.15.2.
--location-trusted
(HTTP) Like -L, --location, but will allow sending the name +
password to all hosts that the site may redirect to. This may or
may not introduce a security breach if the site redirects you to
a site to which you'll send your authentication info (which is
plaintext in the case of HTTP Basic authentication).
See also -u, --user.
-L, --location
(HTTP) If the server reports that the requested page has moved
to a different location (indicated with a Location: header and a
3XX response code), this option will make curl redo the request
on the new place. If used together with -i, --include or -I,
--head, headers from all requested pages will be shown. When
authentication is used, curl only sends its credentials to the
initial host. If a redirect takes curl to a different host, it
won't be able to intercept the user+password. See also
--location-trusted on how to change this. You can limit the
amount of redirects to follow by using the --max-redirs option.
When curl follows a redirect and if the request is a POST, it
will do the following request with a GET if the HTTP response
was 301, 302, or 303. If the response code was any other 3xx
code, curl will re-send the following request using the same
unmodified method.
You can tell curl to not change POST requests to GET after a 30x
response by using the dedicated options for that: --post301,
--post302 and --post303.
The method set with -X, --request overrides the method curl
would otherwise select to use.
--login-options <options>
(IMAP POP3 SMTP) Specify the login options to use during server
authentication.
You can use the login options to specify protocol specific
options that may be used during authentication. At present only
IMAP, POP3 and SMTP support login options. For more information
about the login options please see RFC 2384, RFC 5092 and IETF
draft draft-earhart-url-smtp-00.txt
If this option is used several times, the last one will be used.
Added in 7.34.0.
--mail-auth <address>
(SMTP) Specify a single address. This will be used to specify
the authentication address (identity) of a submitted message
that is being relayed to another server.
See also --mail-rcpt and --mail-from. Added in 7.25.0.
--mail-from <address>
(SMTP) Specify a single address that the given mail should get
sent from.
See also --mail-rcpt and --mail-auth. Added in 7.20.0.
--mail-rcpt-allowfails
(SMTP) When sending data to multiple recipients, by default curl
will abort SMTP conversation if at least one of the recipients
causes RCPT TO command to return an error.
The default behavior can be changed by passing --mail-rcpt-
allowfails command-line option which will make curl ignore
errors and proceed with the remaining valid recipients.
In case when all recipients cause RCPT TO command to fail, curl
will abort SMTP conversation and return the error received from
to the last RCPT TO command. Added in 7.69.0.
--mail-rcpt <address>
(SMTP) Specify a single address, user name or mailing list name.
Repeat this option several times to send to multiple recipients.
When performing a mail transfer, the recipient should specify a
valid email address to send the mail to.
When performing an address verification (VRFY command), the
recipient should be specified as the user name or user name and
domain (as per Section 3.5 of RFC5321). (Added in 7.34.0)
When performing a mailing list expand (EXPN command), the
recipient should be specified using the mailing list name, such
as "Friends" or "London-Office". (Added in 7.34.0)
Added in 7.20.0.
-M, --manual
Manual. Display the huge help text.
--max-filesize <bytes>
Specify the maximum size (in bytes) of a file to download. If
the file requested is larger than this value, the transfer will
not start and curl will return with exit code 63.
A size modifier may be used. For example, Appending 'k' or 'K'
will count the number as kilobytes, 'm' or 'M' makes it
megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K,
3m and 1G. (Added in 7.58.0)
NOTE: The file size is not always known prior to download, and
for such files this option has no effect even if the file
transfer ends up being larger than this given limit. This
concerns both FTP and HTTP transfers.
See also --limit-rate.
--max-redirs <num>
(HTTP) Set maximum number of redirection-followings allowed.
When -L, --location is used, is used to prevent curl from
following redirections too much. By default, the limit is set to
50 redirections. Set this option to -1 to make it unlimited.
If this option is used several times, the last one will be used.
-m, --max-time <seconds>
Maximum time in seconds that you allow the whole operation to
take. This is useful for preventing your batch jobs from
hanging for hours due to slow networks or links going down.
Since 7.32.0, this option accepts decimal values, but the actual
timeout will decrease in accuracy as the specified timeout
increases in decimal precision.
If this option is used several times, the last one will be used.
See also --connect-timeout.
--metalink
This option can tell curl to parse and process a given URI as
Metalink file (both version 3 and 4 (RFC 5854) are supported)
and make use of the mirrors listed within for failover if there
are errors (such as the file or server not being available). It
will also verify the hash of the file after the download
completes. The Metalink file itself is downloaded and processed
in memory and not stored in the local file system.
Example to use a remote Metalink file:
curl --metalink http://www.example.com/example.metalink
To use a Metalink file in the local file system, use FILE
protocol (file://):
curl --metalink file:///example.metalink
Please note that if FILE protocol is disabled, there is no way
to use a local Metalink file at the time of this writing. Also
note that if --metalink and -i, --include are used together,
--include will be ignored. This is because including headers in
the response will break Metalink parser and if the headers are
included in the file described in Metalink file, hash check will
fail.
--metalink requires that the underlying libcurl was built to
support metalink. Added in 7.27.0.
--negotiate
(HTTP) Enables Negotiate (SPNEGO) authentication.
This option requires a library built with GSS-API or SSPI
support. Use -V, --version to see if your curl supports GSS-
API/SSPI or SPNEGO.
When using this option, you must also provide a fake -u, --user
option to activate the authentication code properly. Sending a
'-u :' is enough as the user name and password from the -u,
--user option aren't actually used.
If this option is used several times, only the first one is
used.
See also --basic, --ntlm, --anyauth and --proxy-negotiate.
--netrc-file <filename>
This option is similar to -n, --netrc, except that you provide
the path (absolute or relative) to the netrc file that curl
should use. You can only specify one netrc file per invocation.
If several --netrc-file options are provided, the last one will
be used.
It will abide by --netrc-optional if specified.
This option overrides -n, --netrc. Added in 7.21.5.
--netrc-optional
Very similar to -n, --netrc, but this option makes the .netrc
usage optional and not mandatory as the -n, --netrc option does.
See also --netrc-file. This option overrides -n, --netrc.
-n, --netrc
Makes curl scan the .netrc (_netrc on Windows) file in the
user's home directory for login name and password. This is
typically used for FTP on Unix. If used with HTTP, curl will
enable user authentication. See netrc(5) ftp(1) for details on
the file format. Curl will not complain if that file doesn't
have the right permissions (it should not be either world- or
group-readable). The environment variable "HOME" is used to find
the home directory.
A quick and very simple example of how to setup a .netrc to
allow curl to FTP to the machine host.domain.com with user name
'myself' and password 'secret' should look similar to:
machine host.domain.com login myself password secret
-:, --next
Tells curl to use a separate operation for the following URL and
associated options. This allows you to send several URL
requests, each with their own specific options, for example,
such as different user names or custom requests for each.
-:, --next will reset all local options and only global ones
will have their values survive over to the operation following
the -:, --next instruction. Global options include -v,
--verbose, --trace, --trace-ascii and --fail-early.
For example, you can do both a GET and a POST in a single
command line:
curl www1.example.com --next -d postthis www2.example.com
Added in 7.36.0.
--no-alpn
(HTTPS) Disable the ALPN TLS extension. ALPN is enabled by
default if libcurl was built with an SSL library that supports
ALPN. ALPN is used by a libcurl that supports HTTP/2 to
negotiate HTTP/2 support with the server during https sessions.
See also --no-npn and --http2. --no-alpn requires that the
underlying libcurl was built to support TLS. Added in 7.36.0.
-N, --no-buffer
Disables the buffering of the output stream. In normal work
situations, curl will use a standard buffered output stream that
will have the effect that it will output the data in chunks, not
necessarily exactly when the data arrives. Using this option
will disable that buffering.
Note that this is the negated option name documented. You can
thus use --buffer to enforce the buffering.
--no-keepalive
Disables the use of keepalive messages on the TCP connection.
curl otherwise enables them by default.
Note that this is the negated option name documented. You can
thus use --keepalive to enforce keepalive.
--no-npn
(HTTPS) Disable the NPN TLS extension. NPN is enabled by default
if libcurl was built with an SSL library that supports NPN. NPN
is used by a libcurl that supports HTTP/2 to negotiate HTTP/2
support with the server during https sessions.
See also --no-alpn and --http2. --no-npn requires that the
underlying libcurl was built to support TLS. Added in 7.36.0.
--no-progress-meter
Option to switch off the progress meter output without muting or
otherwise affecting warning and informational messages like -s,
--silent does.
Note that this is the negated option name documented. You can
thus use --progress-meter to enable the progress meter again.
See also -v, --verbose and -s, --silent. Added in 7.67.0.
--no-sessionid
(TLS) Disable curl's use of SSL session-ID caching. By default
all transfers are done using the cache. Note that while nothing
should ever get hurt by attempting to reuse SSL session-IDs,
there seem to be broken SSL implementations in the wild that may
require you to disable this in order for you to succeed.
Note that this is the negated option name documented. You can
thus use --sessionid to enforce session-ID caching.
Added in 7.16.0.
--noproxy <no-proxy-list>
Comma-separated list of hosts which do not use a proxy, if one
is specified. The only wildcard is a single * character, which
matches all hosts, and effectively disables the proxy. Each name
in this list is matched as either a domain which contains the
hostname, or the hostname itself. For example, local.com would
match local.com, local.com:80, and www.local.com, but not
www.notlocal.com.
Since 7.53.0, This option overrides the environment variables
that disable the proxy. If there's an environment variable
disabling a proxy, you can set noproxy list to "" to override
it.
Added in 7.19.4.
--ntlm-wb
(HTTP) Enables NTLM much in the style --ntlm does, but hand over
the authentication to the separate binary ntlmauth application
that is executed when needed.
See also --ntlm and --proxy-ntlm.
--ntlm (HTTP) Enables NTLM authentication. The NTLM authentication
method was designed by Microsoft and is used by IIS web servers.
It is a proprietary protocol, reverse-engineered by clever
people and implemented in curl based on their efforts. This kind
of behavior should not be endorsed, you should encourage
everyone who uses NTLM to switch to a public and documented
authentication method instead, such as Digest.
If you want to enable NTLM for your proxy authentication, then
use --proxy-ntlm.
If this option is used several times, only the first one is
used.
See also --proxy-ntlm. --ntlm requires that the underlying
libcurl was built to support TLS. This option overrides --basic
and --negotiate and --digest and --anyauth.
--oauth2-bearer <token>
(IMAP POP3 SMTP HTTP) Specify the Bearer Token for OAUTH 2.0
server authentication. The Bearer Token is used in conjunction
with the user name which can be specified as part of the --url
or -u, --user options.
The Bearer Token and user name are formatted according to RFC
6750.
If this option is used several times, the last one will be used.
--output-dir <dir>
This option specifies the directory in which files should be
stored, when -O, --remote-name or -o, --output are used.
The given output directory is used for all URLs and output
options on the command line, up until the first -:, --next.
If the specified target directory doesn't exist, the operation
will fail unless --create-dirs is also used.
If this option is used multiple times, the last specified
directory will be used.
See also -O, --remote-name and -J, --remote-header-name. Added
in 7.73.0.
-o, --output <file>
Write output to <file> instead of stdout. If you are using {} or
[] to fetch multiple documents, you should quote the URL and you
can use '#' followed by a number in the <file> specifier. That
variable will be replaced with the current string for the URL
being fetched. Like in:
curl "http://{one,two}.example.com" -o "file_#1.txt"
or use several variables like:
curl "http://{site,host}.host[1-5].com" -o "#1_#2"
You may use this option as many times as the number of URLs you
have. For example, if you specify two URLs on the same command
line, you can use it like this:
curl -o aa example.com -o bb example.net
and the order of the -o options and the URLs doesn't matter,
just that the first -o is for the first URL and so on, so the
above command line can also be written as
curl example.com example.net -o aa -o bb
See also the --create-dirs option to create the local
directories dynamically. Specifying the output as '-' (a single
dash) will force the output to be done to stdout.
See also -O, --remote-name, --remote-name-all and -J, --remote-
header-name.
--parallel-immediate
When doing parallel transfers, this option will instruct curl
that it should rather prefer opening up more connections in
parallel at once rather than waiting to see if new transfers can
be added as multiplexed streams on another connection.
See also -Z, --parallel and --parallel-max. Added in 7.68.0.
--parallel-max
When asked to do parallel transfers, using -Z, --parallel, this
option controls the maximum amount of transfers to do
simultaneously.
The default is 50.
See also -Z, --parallel. Added in 7.66.0.
-Z, --parallel
Makes curl perform its transfers in parallel as compared to the
regular serial manner.
Added in 7.66.0.
--pass <phrase>
(SSH TLS) Passphrase for the private key
If this option is used several times, the last one will be used.
--path-as-is
Tell curl to not handle sequences of /../ or /./ in the given
URL path. Normally curl will squash or merge them according to
standards but with this option set you tell it not to do that.
Added in 7.42.0.
--pinnedpubkey <hashes>
(TLS) Tells curl to use the specified public key file (or
hashes) to verify the peer. This can be a path to a file which
contains a single public key in PEM or DER format, or any number
of base64 encoded sha256 hashes preceded by 'sha256//' and
separated by ';'
When negotiating a TLS or SSL connection, the server sends a
certificate indicating its identity. A public key is extracted
from this certificate and if it does not exactly match the
public key provided to this option, curl will abort the
connection before sending or receiving any data.
PEM/DER support:
7.39.0: OpenSSL, GnuTLS and GSKit
7.43.0: NSS and wolfSSL
7.47.0: mbedtls sha256 support:
7.44.0: OpenSSL, GnuTLS, NSS and wolfSSL
7.47.0: mbedtls Other SSL backends not supported.
If this option is used several times, the last one will be used.
--post301
(HTTP) Tells curl to respect RFC 7231/6.4.2 and not convert POST
requests into GET requests when following a 301 redirection. The
non-RFC behavior is ubiquitous in web browsers, so curl does the
conversion by default to maintain consistency. However, a server
may require a POST to remain a POST after such a redirection.
This option is meaningful only when using -L, --location.
See also --post302, --post303 and -L, --location. Added in
7.17.1.
--post302
(HTTP) Tells curl to respect RFC 7231/6.4.3 and not convert POST
requests into GET requests when following a 302 redirection. The
non-RFC behavior is ubiquitous in web browsers, so curl does the
conversion by default to maintain consistency. However, a server
may require a POST to remain a POST after such a redirection.
This option is meaningful only when using -L, --location.
See also --post301, --post303 and -L, --location. Added in
7.19.1.
--post303
(HTTP) Tells curl to violate RFC 7231/6.4.4 and not convert POST
requests into GET requests when following 303 redirections. A
server may require a POST to remain a POST after a 303
redirection. This option is meaningful only when using -L,
--location.
See also --post302, --post301 and -L, --location. Added in
7.26.0.
--preproxy [protocol://]host[:port]
Use the specified SOCKS proxy before connecting to an HTTP or
HTTPS -x, --proxy. In such a case curl first connects to the
SOCKS proxy and then connects (through SOCKS) to the HTTP or
HTTPS proxy. Hence pre proxy.
The pre proxy string should be specified with a protocol://
prefix to specify alternative proxy protocols. Use socks4://,
socks4a://, socks5:// or socks5h:// to request the specific
SOCKS version to be used. No protocol specified will make curl
default to SOCKS4.
If the port number is not specified in the proxy string, it is
assumed to be 1080.
User and password that might be provided in the proxy string are
URL decoded by curl. This allows you to pass in special
characters such as @ by using %40 or pass in a colon with %3a.
If this option is used several times, the last one will be used.
Added in 7.52.0.
-#, --progress-bar
Make curl display transfer progress as a simple progress bar
instead of the standard, more informational, meter.
This progress bar draws a single line of '#' characters across
the screen and shows a percentage if the transfer size is known.
For transfers without a known size, there will be space ship
(-=o=-) that moves back and forth but only while data is being
transferred, with a set of flying hash sign symbols on top.
--proto-default <protocol>
Tells curl to use protocol for any URL missing a scheme name.
Example:
curl --proto-default https ftp.mozilla.org
An unknown or unsupported protocol causes error
CURLE_UNSUPPORTED_PROTOCOL (1).
This option does not change the default proxy protocol (http).
Without this option curl would make a guess based on the host,
see --url for details.
Added in 7.45.0.
--proto-redir <protocols>
Tells curl to limit what protocols it may use on redirect.
Protocols denied by --proto are not overridden by this option.
See --proto for how protocols are represented.
Example, allow only HTTP and HTTPS on redirect:
curl --proto-redir -all,http,https http://example.com
By default curl will allow HTTP, HTTPS, FTP and FTPS on redirect
(7.65.2). Older versions of curl allowed all protocols on
redirect except several disabled for security reasons: Since
7.19.4 FILE and SCP are disabled, and since 7.40.0 SMB and SMBS
are also disabled. Specifying all or +all enables all protocols
on redirect, including those disabled for security.
Added in 7.20.2.
--proto <protocols>
Tells curl to limit what protocols it may use in the transfer.
Protocols are evaluated left to right, are comma separated, and
are each a protocol name or 'all', optionally prefixed by zero
or more modifiers. Available modifiers are:
+ Permit this protocol in addition to protocols already
permitted (this is the default if no modifier is used).
- Deny this protocol, removing it from the list of protocols
already permitted.
= Permit only this protocol (ignoring the list already
permitted), though subject to later modification by
subsequent entries in the comma separated list.
For example:
--proto -ftps uses the default protocols, but disables ftps
--proto -all,https,+http
only enables http and https
--proto =http,https
also only enables http and https
Unknown protocols produce a warning. This allows scripts to safely rely
on being able to disable potentially dangerous protocols, without
relying upon support for that protocol being built into curl to avoid
an error.
This option can be used multiple times, in which case the effect is the
same as concatenating the protocols into one instance of the option.
See also --proto-redir and --proto-default. Added in 7.20.2.
--proxy-anyauth
Tells curl to pick a suitable authentication method when
communicating with the given HTTP proxy. This might cause an
extra request/response round-trip.
See also -x, --proxy, --proxy-basic and --proxy-digest. Added in
7.13.2.
--proxy-basic
Tells curl to use HTTP Basic authentication when communicating
with the given proxy. Use --basic for enabling HTTP Basic with a
remote host. Basic is the default authentication method curl
uses with proxies.
See also -x, --proxy, --proxy-anyauth and --proxy-digest.
--proxy-cacert <file>
Same as --cacert but used in HTTPS proxy context.
See also --proxy-capath, --cacert, --capath and -x, --proxy.
Added in 7.52.0.
--proxy-capath <dir>
Same as --capath but used in HTTPS proxy context.
See also --proxy-cacert, -x, --proxy and --capath. Added in
7.52.0.
--proxy-cert-type <type>
Same as --cert-type but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-cert <cert[:passwd]>
Same as -E, --cert but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-ciphers <list>
Same as --ciphers but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-crlfile <file>
Same as --crlfile but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-digest
Tells curl to use HTTP Digest authentication when communicating
with the given proxy. Use --digest for enabling HTTP Digest with
a remote host.
See also -x, --proxy, --proxy-anyauth and --proxy-basic.
--proxy-header <header/@file>
(HTTP) Extra header to include in the request when sending HTTP
to a proxy. You may specify any number of extra headers. This is
the equivalent option to -H, --header but is for proxy
communication only like in CONNECT requests when you want a
separate header sent to the proxy to what is sent to the actual
remote host.
curl will make sure that each header you add/replace is sent
with the proper end-of-line marker, you should thus not add that
as a part of the header content: do not add newlines or carriage
returns, they will only mess things up for you.
Headers specified with this option will not be included in
requests that curl knows will not be sent to a proxy.
Starting in 7.55.0, this option can take an argument in
@filename style, which then adds a header for each line in the
input file. Using @- will make curl read the header file from
stdin.
This option can be used multiple times to add/replace/remove
multiple headers.
Added in 7.37.0.
--proxy-insecure
Same as -k, --insecure but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-key-type <type>
Same as --key-type but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-key <key>
Same as --key but used in HTTPS proxy context.
--proxy-negotiate
Tells curl to use HTTP Negotiate (SPNEGO) authentication when
communicating with the given proxy. Use --negotiate for enabling
HTTP Negotiate (SPNEGO) with a remote host.
See also --proxy-anyauth and --proxy-basic. Added in 7.17.1.
--proxy-ntlm
Tells curl to use HTTP NTLM authentication when communicating
with the given proxy. Use --ntlm for enabling NTLM with a remote
host.
See also --proxy-negotiate and --proxy-anyauth.
--proxy-pass <phrase>
Same as --pass but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-pinnedpubkey <hashes>
(TLS) Tells curl to use the specified public key file (or
hashes) to verify the proxy. This can be a path to a file which
contains a single public key in PEM or DER format, or any number
of base64 encoded sha256 hashes preceded by 'sha256//' and
separated by ';'
When negotiating a TLS or SSL connection, the server sends a
certificate indicating its identity. A public key is extracted
from this certificate and if it does not exactly match the
public key provided to this option, curl will abort the
connection before sending or receiving any data.
If this option is used several times, the last one will be used.
--proxy-service-name <name>
This option allows you to change the service name for proxy
negotiation.
Added in 7.43.0.
--proxy-ssl-allow-beast
Same as --ssl-allow-beast but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-ssl-auto-client-cert
Same as --ssl-auto-client-cert but used in HTTPS proxy context.
Added in 7.77.0.
--proxy-tls13-ciphers <ciphersuite list>
(TLS) Specifies which cipher suites to use in the connection to
your HTTPS proxy when it negotiates TLS 1.3. The list of ciphers
suites must specify valid ciphers. Read up on TLS 1.3 cipher
suite details on this URL:
https://curl.se/docs/ssl-ciphers.html
This option is currently used only when curl is built to use
OpenSSL 1.1.1 or later. If you are using a different SSL backend
you can try setting TLS 1.3 cipher suites by using the --proxy-
ciphers option.
If this option is used several times, the last one will be used.
--proxy-tlsauthtype <type>
Same as --tlsauthtype but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-tlspassword <string>
Same as --tlspassword but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-tlsuser <name>
Same as --tlsuser but used in HTTPS proxy context.
Added in 7.52.0.
--proxy-tlsv1
Same as -1, --tlsv1 but used in HTTPS proxy context.
Added in 7.52.0.
-U, --proxy-user <user:password>
Specify the user name and password to use for proxy
authentication.
If you use a Windows SSPI-enabled curl binary and do either
Negotiate or NTLM authentication then you can tell curl to
select the user name and password from your environment by
specifying a single colon with this option: "-U :".
On systems where it works, curl will hide the given option
argument from process listings. This is not enough to protect
credentials from possibly getting seen by other users on the
same system as they will still be visible for a brief moment
before cleared. Such sensitive data should be retrieved from a
file instead or similar and never used in clear text in a
command line.
If this option is used several times, the last one will be used.
-x, --proxy [protocol://]host[:port]
Use the specified proxy.
The proxy string can be specified with a protocol:// prefix. No
protocol specified or http:// will be treated as HTTP proxy. Use
socks4://, socks4a://, socks5:// or socks5h:// to request a
specific SOCKS version to be used. (The protocol support was
added in curl 7.21.7)
HTTPS proxy support via https:// protocol prefix was added in
7.52.0 for OpenSSL, GnuTLS and NSS.
Unrecognized and unsupported proxy protocols cause an error
since 7.52.0. Prior versions may ignore the protocol and use
http:// instead.
If the port number is not specified in the proxy string, it is
assumed to be 1080.
This option overrides existing environment variables that set
the proxy to use. If there's an environment variable setting a
proxy, you can set proxy to "" to override it.
All operations that are performed over an HTTP proxy will
transparently be converted to HTTP. It means that certain
protocol specific operations might not be available. This is not
the case if you can tunnel through the proxy, as one with the
-p, --proxytunnel option.
User and password that might be provided in the proxy string are
URL decoded by curl. This allows you to pass in special
characters such as @ by using %40 or pass in a colon with %3a.
The proxy host can be specified the exact same way as the proxy
environment variables, including the protocol prefix (http://)
and the embedded user + password.
If this option is used several times, the last one will be used.
--proxy1.0 <host[:port]>
Use the specified HTTP 1.0 proxy. If the port number is not
specified, it is assumed at port 1080.
The only difference between this and the HTTP proxy option -x,
--proxy, is that attempts to use CONNECT through the proxy will
specify an HTTP 1.0 protocol instead of the default HTTP 1.1.
-p, --proxytunnel
When an HTTP proxy is used -x, --proxy, this option will make
curl tunnel through the proxy. The tunnel approach is made with
the HTTP proxy CONNECT request and requires that the proxy
allows direct connect to the remote port number curl wants to
tunnel through to.
To suppress proxy CONNECT response headers when curl is set to
output headers use --suppress-connect-headers.
See also -x, --proxy.
--pubkey <key>
(SFTP SCP) Public key file name. Allows you to provide your
public key in this separate file.
If this option is used several times, the last one will be used.
(As of 7.39.0, curl attempts to automatically extract the public
key from the private key file, so passing this option is
generally not required. Note that this public key extraction
requires libcurl to be linked against a copy of libssh2 1.2.8 or
higher that is itself linked against OpenSSL.)
-Q, --quote
(FTP SFTP) Send an arbitrary command to the remote FTP or SFTP
server. Quote commands are sent BEFORE the transfer takes place
(just after the initial PWD command in an FTP transfer, to be
exact). To make commands take place after a successful transfer,
prefix them with a dash '-'. To make commands be sent after
curl has changed the working directory, just before the transfer
command(s), prefix the command with a '+' (this is only
supported for FTP). You may specify any number of commands.
If the server returns failure for one of the commands, the
entire operation will be aborted. You must send syntactically
correct FTP commands as RFC 959 defines to FTP servers, or one
of the commands listed below to SFTP servers.
Prefix the command with an asterisk (*) to make curl continue
even if the command fails as by default curl will stop at first
failure.
This option can be used multiple times.
SFTP is a binary protocol. Unlike for FTP, curl interprets SFTP
quote commands itself before sending them to the server. File
names may be quoted shell-style to embed spaces or special
characters. Following is the list of all supported SFTP quote
commands:
atime date file
The atime command sets the last access time of the file
named by the file operand. The <date expression> can be
all sorts of date strings, see the _getdate§ion=3">curl_getdate(3) man
page for date expression details. (Added in 7.73.0)
chgrp group file
The chgrp command sets the group ID of the file named by
the file operand to the group ID specified by the group
operand. The group operand is a decimal integer group ID.
chmod mode file
The chmod command modifies the file mode bits of the
specified file. The mode operand is an octal integer mode
number.
chown user file
The chown command sets the owner of the file named by the
file operand to the user ID specified by the user
operand. The user operand is a decimal integer user ID.
ln source_file target_file
The ln and symlink commands create a symbolic link at the
target_file location pointing to the source_file
location.
mkdir directory_name
The mkdir command creates the directory named by the
directory_name operand.
mtime date file
The mtime command sets the last modification time of the
file named by the file operand. The <date expression> can
be all sorts of date strings, see the _getdate§ion=3">curl_getdate(3) man
page for date expression details. (Added in 7.73.0)
pwd The pwd command returns the absolute pathname of the
current working directory.
rename source target
The rename command renames the file or directory named by
the source operand to the destination path named by the
target operand.
rm file
The rm command removes the file specified by the file
operand.
rmdir directory
The rmdir command removes the directory entry specified
by the directory operand, provided it is empty.
symlink source_file target_file
See ln.
--random-file <file>
Specify the path name to file containing what will be considered
as random data. The data may be used to seed the random engine
for SSL connections. See also the --egd-file option.
-r, --range <range>
(HTTP FTP SFTP FILE) Retrieve a byte range (i.e. a partial
document) from an HTTP/1.1, FTP or SFTP server or a local FILE.
Ranges can be specified in a number of ways.
0-499 specifies the first 500 bytes
500-999 specifies the second 500 bytes
-500 specifies the last 500 bytes
9500- specifies the bytes from offset 9500 and forward
0-0,-1 specifies the first and last byte only(*)(HTTP))(HTTP)
100-199,500-599
specifies two separate 100-byte ranges(*) (HTTP)
(*) = NOTE that this will cause the server to reply with a
multipart response, which will be returned as-is by curl!
Parsing or otherwise transforming this response is the
responsibility of the caller.
Only digit characters (0-9) are valid in the 'start' and 'stop'
fields of the 'start-stop' range syntax. If a non-digit
character is given in the range, the server's response will be
unspecified, depending on the server's configuration.
You should also be aware that many HTTP/1.1 servers do not have
this feature enabled, so that when you attempt to get a range,
you'll instead get the whole document.
FTP and SFTP range downloads only support the simple 'start-
stop' syntax (optionally with one of the numbers omitted). FTP
use depends on the extended FTP command SIZE.
If this option is used several times, the last one will be used.
--raw (HTTP) When used, it disables all internal HTTP decoding of
content or transfer encodings and instead makes them passed on
unaltered, raw.
Added in 7.16.2.
-e, --referer <URL>
(HTTP) Sends the "Referrer Page" information to the HTTP server.
This can also be set with the -H, --header flag of course. When
used with -L, --location you can append ";auto" to the -e,
--referer URL to make curl automatically set the previous URL
when it follows a Location: header. The ";auto" string can be
used alone, even if you don't set an initial -e, --referer.
If this option is used several times, the last one will be used.
See also -A, --user-agent and -H, --header.
-J, --remote-header-name
(HTTP) This option tells the -O, --remote-name option to use the
server-specified Content-Disposition filename instead of
extracting a filename from the URL.
If the server specifies a file name and a file with that name
already exists in the current working directory it will not be
overwritten and an error will occur. If the server doesn't
specify a file name then this option has no effect.
There's no attempt to decode %-sequences (yet) in the provided
file name, so this option may provide you with rather unexpected
file names.
WARNING: Exercise judicious use of this option, especially on
Windows. A rogue server could send you the name of a DLL or
other file that could possibly be loaded automatically by
Windows or some third party software.
--remote-name-all
This option changes the default action for all given URLs to be
dealt with as if -O, --remote-name were used for each one. So if
you want to disable that for a specific URL after --remote-name-
all has been used, you must use "-o -" or --no-remote-name.
Added in 7.19.0.
-O, --remote-name
Write output to a local file named like the remote file we get.
(Only the file part of the remote file is used, the path is cut
off.)
The file will be saved in the current working directory. If you
want the file saved in a different directory, make sure you
change the current working directory before invoking curl with
this option.
The remote file name to use for saving is extracted from the
given URL, nothing else, and if it already exists it will be
overwritten. If you want the server to be able to choose the
file name refer to -J, --remote-header-name which can be used in
addition to this option. If the server chooses a file name and
that name already exists it will not be overwritten.
There is no URL decoding done on the file name. If it has %20 or
other URL encoded parts of the name, they will end up as-is as
file name.
You may use this option as many times as the number of URLs you
have.
-R, --remote-time
When used, this will make curl attempt to figure out the
timestamp of the remote file, and if that is available make the
local file get that same timestamp.
--request-target
(HTTP) Tells curl to use an alternative "target" (path) instead
of using the path as provided in the URL. Particularly useful
when wanting to issue HTTP requests without leading slash or
other data that doesn't follow the regular URL pattern, like
"OPTIONS *".
Added in 7.55.0.
-X, --request <command>
(HTTP) Specifies a custom request method to use when
communicating with the HTTP server. The specified request
method will be used instead of the method otherwise used (which
defaults to GET). Read the HTTP 1.1 specification for details
and explanations. Common additional HTTP requests include PUT
and DELETE, but related technologies like WebDAV offers
PROPFIND, COPY, MOVE and more.
Normally you don't need this option. All sorts of GET, HEAD,
POST and PUT requests are rather invoked by using dedicated
command line options.
This option only changes the actual word used in the HTTP
request, it does not alter the way curl behaves. So for example
if you want to make a proper HEAD request, using -X HEAD will
not suffice. You need to use the -I, --head option.
The method string you set with -X, --request will be used for
all requests, which if you for example use -L, --location may
cause unintended side-effects when curl doesn't change request
method according to the HTTP 30x response codes - and similar.
(FTP) Specifies a custom FTP command to use instead of LIST when
doing file lists with FTP.
(POP3) Specifies a custom POP3 command to use instead of LIST or
RETR. (Added in 7.26.0)
(IMAP) Specifies a custom IMAP command to use instead of LIST.
(Added in 7.30.0)
(SMTP) Specifies a custom SMTP command to use instead of HELP or
VRFY. (Added in 7.34.0)
If this option is used several times, the last one will be used.
--resolve <[+]host:port:addr[,addr]...>
Provide a custom address for a specific host and port pair.
Using this, you can make the curl requests(s) use a specified
address and prevent the otherwise normally resolved address to
be used. Consider it a sort of /etc/hosts alternative provided
on the command line. The port number should be the number used
for the specific protocol the host will be used for. It means
you need several entries if you want to provide address for the
same host but different ports.
By specifying '*' as host you can tell curl to resolve any host
and specific port pair to the specified address. Wildcard is
resolved last so any --resolve with a specific host and port
will be used first.
The provided address set by this option will be used even if -4,
--ipv4 or -6, --ipv6 is set to make curl use another IP version.
By prefixing the host with a '+' you can make the entry time out
after curl's default timeout (1 minute). Note that this will
only make sense for long running parallel transfers with a lot
of files. In such cases, if this option is used curl will try to
resolve the host as it normally would once the timeout has
expired.
Support for providing the IP address within [brackets] was added
in 7.57.0.
Support for providing multiple IP addresses per entry was added
in 7.59.0.
Support for resolving with wildcard was added in 7.64.0.
Support for the '+' prefix was was added in 7.75.0.
This option can be used many times to add many host names to
resolve.
Added in 7.21.3.
--retry-all-errors
Retry on any error. This option is used together with --retry.
This option is the "sledgehammer" of retrying. Do not use this
option by default (eg in curlrc), there may be unintended
consequences such as sending or receiving duplicate data. Do not
use with redirected input or output. You'd be much better off
handling your unique problems in shell script. Please read the
example below.
Warning: For server compatibility curl attempts to retry failed
flaky transfers as close as possible to how they were started,
but this is not possible with redirected input or output. For
example, before retrying it removes output data from a failed
partial transfer that was written to an output file. However
this is not true of data redirected to a | pipe or > file, which
are not reset. We strongly suggest don't parse or record output
via redirect in combination with this option, since you may
receive duplicate data.
By default curl will not error on an HTTP response code that
indicates an HTTP error, if the transfer was successful. For
example, if a server replies 404 Not Found and the reply is
fully received then that is not an error. When --retry is used
then curl will retry on some HTTP response codes that indicate
transient HTTP errors, but that does not include most 4xx
response codes such as 404. If you want to retry on all response
codes that indicate HTTP errors (4xx and 5xx) then combine with
-f, --fail.
Added in 7.71.0.
--retry-connrefused
In addition to the other conditions, consider ECONNREFUSED as a
transient error too for --retry. This option is used together
with --retry.
Added in 7.52.0.
--retry-delay <seconds>
Make curl sleep this amount of time before each retry when a
transfer has failed with a transient error (it changes the
default backoff time algorithm between retries). This option is
only interesting if --retry is also used. Setting this delay to
zero will make curl use the default backoff time.
If this option is used several times, the last one will be used.
Added in 7.12.3.
--retry-max-time <seconds>
The retry timer is reset before the first transfer attempt.
Retries will be done as usual (see --retry) as long as the timer
hasn't reached this given limit. Notice that if the timer hasn't
reached the limit, the request will be made and while
performing, it may take longer than this given time period. To
limit a single request's maximum time, use -m, --max-time. Set
this option to zero to not timeout retries.
If this option is used several times, the last one will be used.
Added in 7.12.3.
--retry <num>
If a transient error is returned when curl tries to perform a
transfer, it will retry this number of times before giving up.
Setting the number to 0 makes curl do no retries (which is the
default). Transient error means either: a timeout, an FTP 4xx
response code or an HTTP 408, 429, 500, 502, 503 or 504 response
code.
When curl is about to retry a transfer, it will first wait one
second and then for all forthcoming retries it will double the
waiting time until it reaches 10 minutes which then will be the
delay between the rest of the retries. By using --retry-delay
you disable this exponential backoff algorithm. See also
--retry-max-time to limit the total time allowed for retries.
Since curl 7.66.0, curl will comply with the Retry-After:
response header if one was present to know when to issue the
next retry.
If this option is used several times, the last one will be used.
Added in 7.12.3.
--sasl-authzid <identity>
Use this authorisation identity (authzid), during SASL PLAIN
authentication, in addition to the authentication identity
(authcid) as specified by -u, --user.
If the option isn't specified, the server will derive the
authzid from the authcid, but if specified, and depending on the
server implementation, it may be used to access another user's
inbox, that the user has been granted access to, or a shared
mailbox for example.
Added in 7.66.0.
--sasl-ir
Enable initial response in SASL authentication.
Added in 7.31.0.
--service-name <name>
This option allows you to change the service name for SPNEGO.
Examples: --negotiate --service-name sockd would use
sockd/server-name.
Added in 7.43.0.
-S, --show-error
When used with -s, --silent, it makes curl show an error message
if it fails.
See also --no-progress-meter.
-s, --silent
Silent or quiet mode. Don't show progress meter or error
messages. Makes Curl mute. It will still output the data you
ask for, potentially even to the terminal/stdout unless you
redirect it.
Use -S, --show-error in addition to this option to disable
progress meter but still show error messages.
See also -v, --verbose, --stderr and --no-progress-meter.
--socks4 <host[:port]>
Use the specified SOCKS4 proxy. If the port number is not
specified, it is assumed at port 1080.
This option overrides any previous use of -x, --proxy, as they
are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a
socks4 proxy with -x, --proxy using a socks4:// protocol prefix.
Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at
the same time -x, --proxy is used with an HTTP/HTTPS proxy. In
such a case curl first connects to the SOCKS proxy and then
connects (through SOCKS) to the HTTP or HTTPS proxy.
If this option is used several times, the last one will be used.
Added in 7.15.2.
--socks4a <host[:port]>
Use the specified SOCKS4a proxy. If the port number is not
specified, it is assumed at port 1080.
This option overrides any previous use of -x, --proxy, as they
are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a
socks4a proxy with -x, --proxy using a socks4a:// protocol
prefix.
Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at
the same time -x, --proxy is used with an HTTP/HTTPS proxy. In
such a case curl first connects to the SOCKS proxy and then
connects (through SOCKS) to the HTTP or HTTPS proxy.
If this option is used several times, the last one will be used.
Added in 7.18.0.
--socks5-basic
Tells curl to use username/password authentication when
connecting to a SOCKS5 proxy. The username/password
authentication is enabled by default. Use --socks5-gssapi to
force GSS-API authentication to SOCKS5 proxies.
Added in 7.55.0.
--socks5-gssapi-nec
As part of the GSS-API negotiation a protection mode is
negotiated. RFC 1961 says in section 4.3/4.4 it should be
protected, but the NEC reference implementation does not. The
option --socks5-gssapi-nec allows the unprotected exchange of
the protection mode negotiation.
Added in 7.19.4.
--socks5-gssapi-service <name>
The default service name for a socks server is rcmd/server-fqdn.
This option allows you to change it.
Examples: --socks5 proxy-name --socks5-gssapi-service sockd
would use sockd/proxy-name --socks5 proxy-name --socks5-gssapi-
service sockd/real-name would use sockd/real-name for cases
where the proxy-name does not match the principal name.
Added in 7.19.4.
--socks5-gssapi
Tells curl to use GSS-API authentication when connecting to a
SOCKS5 proxy. The GSS-API authentication is enabled by default
(if curl is compiled with GSS-API support). Use --socks5-basic
to force username/password authentication to SOCKS5 proxies.
Added in 7.55.0.
--socks5-hostname <host[:port]>
Use the specified SOCKS5 proxy (and let the proxy resolve the
host name). If the port number is not specified, it is assumed
at port 1080.
This option overrides any previous use of -x, --proxy, as they
are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a
socks5 hostname proxy with -x, --proxy using a socks5h://
protocol prefix.
Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at
the same time -x, --proxy is used with an HTTP/HTTPS proxy. In
such a case curl first connects to the SOCKS proxy and then
connects (through SOCKS) to the HTTP or HTTPS proxy.
If this option is used several times, the last one will be used.
Added in 7.18.0.
--socks5 <host[:port]>
Use the specified SOCKS5 proxy - but resolve the host name
locally. If the port number is not specified, it is assumed at
port 1080.
This option overrides any previous use of -x, --proxy, as they
are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a
socks5 proxy with -x, --proxy using a socks5:// protocol prefix.
Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at
the same time -x, --proxy is used with an HTTP/HTTPS proxy. In
such a case curl first connects to the SOCKS proxy and then
connects (through SOCKS) to the HTTP or HTTPS proxy.
If this option is used several times, the last one will be used.
This option (as well as --socks4) does not work with IPV6, FTPS
or LDAP.
Added in 7.18.0.
-Y, --speed-limit <speed>
If a download is slower than this given speed (in bytes per
second) for speed-time seconds it gets aborted. speed-time is
set with -y, --speed-time and is 30 if not set.
If this option is used several times, the last one will be used.
-y, --speed-time <seconds>
If a download is slower than speed-limit bytes per second during
a speed-time period, the download gets aborted. If speed-time is
used, the default speed-limit will be 1 unless set with -Y,
--speed-limit.
This option controls transfers and thus will not affect slow
connects etc. If this is a concern for you, try the --connect-
timeout option.
If this option is used several times, the last one will be used.
--ssl-allow-beast
This option tells curl to not work around a security flaw in the
SSL3 and TLS1.0 protocols known as BEAST. If this option isn't
used, the SSL layer may use workarounds known to cause
interoperability problems with some older SSL implementations.
WARNING: this option loosens the SSL security, and by using this
flag you ask for exactly that.
Added in 7.25.0.
--ssl-auto-client-cert
Tell libcurl to automatically locate and use a client
certificate for authentication, when requested by the server.
This option is only supported for Schannel (the native Windows
SSL library). Prior to 7.77.0 this was the default behavior in
libcurl with Schannel. Since the server can request any
certificate that supports client authentication in the OS
certificate store it could be a privacy violation and
unexpected.
See also --proxy-ssl-auto-client-cert. Added in 7.77.0.
--ssl-no-revoke
(Schannel) This option tells curl to disable certificate
revocation checks. WARNING: this option loosens the SSL
security, and by using this flag you ask for exactly that.
Added in 7.44.0.
--ssl-reqd
(FTP IMAP POP3 SMTP) Require SSL/TLS for the connection.
Terminates the connection if the server doesn't support SSL/TLS.
This option was formerly known as --ftp-ssl-reqd.
Added in 7.20.0.
--ssl-revoke-best-effort
(Schannel) This option tells curl to ignore certificate
revocation checks when they failed due to missing/offline
distribution points for the revocation check lists.
Added in 7.70.0.
--ssl (FTP IMAP POP3 SMTP) Try to use SSL/TLS for the connection.
Reverts to a non-secure connection if the server doesn't support
SSL/TLS. See also --ftp-ssl-control and --ssl-reqd for
different levels of encryption required.
This option was formerly known as --ftp-ssl (Added in 7.11.0).
That option name can still be used but will be removed in a
future version.
Added in 7.20.0.
-2, --sslv2
(SSL) This option previously asked curl to use SSLv2, but
starting in curl 7.77.0 this instruction is ignored. SSLv2 is
widely considered insecure (see RFC 6176).
See also --http1.1 and --http2. -2, --sslv2 requires that the
underlying libcurl was built to support TLS. This option
overrides -3, --sslv3 and -1, --tlsv1 and --tlsv1.1 and
--tlsv1.2.
-3, --sslv3
(SSL) This option previously asked curl to use SSLv3, but
starting in curl 7.77.0 this instruction is ignored. SSLv3 is
widely considered insecure (see RFC 7568).
See also --http1.1 and --http2. -3, --sslv3 requires that the
underlying libcurl was built to support TLS. This option
overrides -2, --sslv2 and -1, --tlsv1 and --tlsv1.1 and
--tlsv1.2.
--stderr <file>
Redirect all writes to stderr to the specified file instead. If
the file name is a plain '-', it is instead written to stdout.
If this option is used several times, the last one will be used.
See also -v, --verbose and -s, --silent.
--styled-output
Enables the automatic use of bold font styles when writing HTTP
headers to the terminal. Use --no-styled-output to switch them
off.
Added in 7.61.0.
--suppress-connect-headers
When -p, --proxytunnel is used and a CONNECT request is made
don't output proxy CONNECT response headers. This option is
meant to be used with -D, --dump-header or -i, --include which
are used to show protocol headers in the output. It has no
effect on debug options such as -v, --verbose or --trace, or any
statistics.
See also -D, --dump-header, -i, --include and -p, --proxytunnel.
--tcp-fastopen
Enable use of TCP Fast Open (RFC7413).
Added in 7.49.0.
--tcp-nodelay
Turn on the TCP_NODELAY option. See the _easy_setopt§ion=3">curl_easy_setopt(3) man
page for details about this option.
Since 7.50.2, curl sets this option by default and you need to
explicitly switch it off if you don't want it on.
Added in 7.11.2.
-t, --telnet-option <opt=val>
Pass options to the telnet protocol. Supported options are:
TTYPE=<term> Sets the terminal type.
XDISPLOC=<X display> Sets the X display location.
NEW_ENV=<var,val> Sets an environment variable.
--tftp-blksize <value>
(TFTP) Set TFTP BLKSIZE option (must be >512). This is the block
size that curl will try to use when transferring data to or from
a TFTP server. By default 512 bytes will be used.
If this option is used several times, the last one will be used.
Added in 7.20.0.
--tftp-no-options
(TFTP) Tells curl not to send TFTP options requests.
This option improves interop with some legacy servers that do
not acknowledge or properly implement TFTP options. When this
option is used --tftp-blksize is ignored.
Added in 7.48.0.
-z, --time-cond <time>
(HTTP FTP) Request a file that has been modified later than the
given time and date, or one that has been modified before that
time. The <date expression> can be all sorts of date strings or
if it doesn't match any internal ones, it is taken as a filename
and tries to get the modification date (mtime) from <file>
instead. See the _getdate§ion=3">curl_getdate(3) man pages for date expression
details.
Start the date expression with a dash (-) to make it request for
a document that is older than the given date/time, default is a
document that is newer than the specified date/time.
If this option is used several times, the last one will be used.
--tls-max <VERSION>
(SSL) VERSION defines maximum supported TLS version. The minimum
acceptable version is set by tlsv1.0, tlsv1.1, tlsv1.2 or
tlsv1.3.
If the connection is done without TLS, this option has no
effect. This includes QUIC-using (HTTP/3) transfers.
default
Use up to recommended TLS version.
1.0 Use up to TLSv1.0.
1.1 Use up to TLSv1.1.
1.2 Use up to TLSv1.2.
1.3 Use up to TLSv1.3.
See also --tlsv1.0, --tlsv1.1, --tlsv1.2 and --tlsv1.3. --tls-max
requires that the underlying libcurl was built to support TLS. Added in
7.54.0.
--tls13-ciphers <ciphersuite list>
(TLS) Specifies which cipher suites to use in the connection if
it negotiates TLS 1.3. The list of ciphers suites must specify
valid ciphers. Read up on TLS 1.3 cipher suite details on this
URL:
https://curl.se/docs/ssl-ciphers.html
This option is currently used only when curl is built to use
OpenSSL 1.1.1 or later. If you are using a different SSL backend
you can try setting TLS 1.3 cipher suites by using the --ciphers
option.
If this option is used several times, the last one will be used.
--tlsauthtype <type>
Set TLS authentication type. Currently, the only supported
option is "SRP", for TLS-SRP (RFC 5054). If --tlsuser and
--tlspassword are specified but --tlsauthtype is not, then this
option defaults to "SRP". This option works only if the
underlying libcurl is built with TLS-SRP support, which requires
OpenSSL or GnuTLS with TLS-SRP support.
Added in 7.21.4.
--tlspassword
Set password for use with the TLS authentication method
specified with --tlsauthtype. Requires that --tlsuser also be
set.
This doesn't work with TLS 1.3.
Added in 7.21.4.
--tlsuser <name>
Set username for use with the TLS authentication method
specified with --tlsauthtype. Requires that --tlspassword also
is set.
This doesn't work with TLS 1.3.
Added in 7.21.4.
--tlsv1.0
(TLS) Forces curl to use TLS version 1.0 or later when
connecting to a remote TLS server.
In old versions of curl this option was documented to allow
_only_ TLS 1.0, but behavior was inconsistent depending on the
TLS library. Use --tls-max if you want to set a maximum TLS
version.
Added in 7.34.0.
--tlsv1.1
(TLS) Forces curl to use TLS version 1.1 or later when
connecting to a remote TLS server.
In old versions of curl this option was documented to allow
_only_ TLS 1.1, but behavior was inconsistent depending on the
TLS library. Use --tls-max if you want to set a maximum TLS
version.
Added in 7.34.0.
--tlsv1.2
(TLS) Forces curl to use TLS version 1.2 or later when
connecting to a remote TLS server.
In old versions of curl this option was documented to allow
_only_ TLS 1.2, but behavior was inconsistent depending on the
TLS library. Use --tls-max if you want to set a maximum TLS
version.
Added in 7.34.0.
--tlsv1.3
(TLS) Forces curl to use TLS version 1.3 or later when
connecting to a remote TLS server.
If the connection is done without TLS, this option has no
effect. This includes QUIC-using (HTTP/3) transfers.
Note that TLS 1.3 is not supported by all TLS backends.
Added in 7.52.0.
-1, --tlsv1
(SSL) Tells curl to use at least TLS version 1.x when
negotiating with a remote TLS server. That means TLS version 1.0
or higher
See also --http1.1 and --http2. -1, --tlsv1 requires that the
underlying libcurl was built to support TLS. This option
overrides --tlsv1.1 and --tlsv1.2 and --tlsv1.3.
--tr-encoding
(HTTP) Request a compressed Transfer-Encoding response using one
of the algorithms curl supports, and uncompress the data while
receiving it.
Added in 7.21.6.
--trace-ascii <file>
Enables a full trace dump of all incoming and outgoing data,
including descriptive information, to the given output file. Use
"-" as filename to have the output sent to stdout.
This is very similar to --trace, but leaves out the hex part and
only shows the ASCII part of the dump. It makes smaller output
that might be easier to read for untrained humans.
If this option is used several times, the last one will be used.
This option overrides --trace and -v, --verbose.
--trace-time
Prepends a time stamp to each trace or verbose line that curl
displays.
Added in 7.14.0.
--trace <file>
Enables a full trace dump of all incoming and outgoing data,
including descriptive information, to the given output file. Use
"-" as filename to have the output sent to stdout. Use "%" as
filename to have the output sent to stderr.
If this option is used several times, the last one will be used.
This option overrides -v, --verbose and --trace-ascii.
--unix-socket <path>
(HTTP) Connect through this Unix domain socket, instead of using
the network.
Added in 7.40.0.
-T, --upload-file <file>
This transfers the specified local file to the remote URL. If
there is no file part in the specified URL, curl will append the
local file name. NOTE that you must use a trailing / on the last
directory to really prove to Curl that there is no file name or
curl will think that your last directory name is the remote file
name to use. That will most likely cause the upload operation to
fail. If this is used on an HTTP(S) server, the PUT command will
be used.
Use the file name "-" (a single dash) to use stdin instead of a
given file. Alternately, the file name "." (a single period)
may be specified instead of "-" to use stdin in non-blocking
mode to allow reading server output while stdin is being
uploaded.
You can specify one -T, --upload-file for each URL on the
command line. Each -T, --upload-file + URL pair specifies what
to upload and to where. curl also supports "globbing" of the -T,
--upload-file argument, meaning that you can upload multiple
files to a single URL by using the same URL globbing style
supported in the URL, like this:
curl --upload-file "{file1,file2}" http://www.example.com
or even
curl -T "img[1-1000].png" ftp://ftp.example.com/upload/
When uploading to an SMTP server: the uploaded data is assumed
to be RFC 5322 formatted. It has to feature the necessary set of
headers and mail body formatted correctly by the user as curl
will not transcode nor encode it further in any way.
--url <url>
Specify a URL to fetch. This option is mostly handy when you
want to specify URL(s) in a config file.
If the given URL is missing a scheme name (such as "http://" or
"ftp://" etc) then curl will make a guess based on the host. If
the outermost sub-domain name matches DICT, FTP, IMAP, LDAP,
POP3 or SMTP then that protocol will be used, otherwise HTTP
will be used. Since 7.45.0 guessing can be disabled by setting a
default protocol, see --proto-default for details.
This option may be used any number of times. To control where
this URL is written, use the -o, --output or the -O, --remote-
name options.
Warning: On Windows, particular file:// accesses can be
converted to network accesses by the operating system. Beware!
-B, --use-ascii
(FTP LDAP) Enable ASCII transfer. For FTP, this can also be
enforced by using a URL that ends with ";type=A". This option
causes data sent to stdout to be in text mode for win32 systems.
-A, --user-agent <name>
(HTTP) Specify the User-Agent string to send to the HTTP server.
To encode blanks in the string, surround the string with single
quote marks. This header can also be set with the -H, --header
or the --proxy-header options.
If you give an empty argument to -A, --user-agent (""), it will
remove the header completely from the request. If you prefer a
blank header, you can set it to a single space (" ").
If this option is used several times, the last one will be used.
-u, --user <user:password>
Specify the user name and password to use for server
authentication. Overrides -n, --netrc and --netrc-optional.
If you simply specify the user name, curl will prompt for a
password.
The user name and passwords are split up on the first colon,
which makes it impossible to use a colon in the user name with
this option. The password can, still.
On systems where it works, curl will hide the given option
argument from process listings. This is not enough to protect
credentials from possibly getting seen by other users on the
same system as they will still be visible for a brief moment
before cleared. Such sensitive data should be retrieved from a
file instead or similar and never used in clear text in a
command line.
When using Kerberos V5 with a Windows based server you should
include the Windows domain name in the user name, in order for
the server to successfully obtain a Kerberos Ticket. If you
don't then the initial authentication handshake may fail.
When using NTLM, the user name can be specified simply as the
user name, without the domain, if there is a single domain and
forest in your setup for example.
To specify the domain name use either Down-Level Logon Name or
UPN (User Principal Name) formats. For example, EXAMPLE\user and
user@example.com respectively.
If you use a Windows SSPI-enabled curl binary and perform
Kerberos V5, Negotiate, NTLM or Digest authentication then you
can tell curl to select the user name and password from your
environment by specifying a single colon with this option: "-u
:".
If this option is used several times, the last one will be used.
-v, --verbose
Makes curl verbose during the operation. Useful for debugging
and seeing what's going on "under the hood". A line starting
with '>' means "header data" sent by curl, '<' means "header
data" received by curl that is hidden in normal cases, and a
line starting with '*' means additional info provided by curl.
If you only want HTTP headers in the output, -i, --include might
be the option you're looking for.
If you think this option still doesn't give you enough details,
consider using --trace or --trace-ascii instead.
Use -s, --silent to make curl really quiet.
See also -i, --include. This option overrides --trace and
--trace-ascii.
-V, --version
Displays information about curl and the libcurl version it uses.
The first line includes the full version of curl, libcurl and
other 3rd party libraries linked with the executable.
The second line (starts with "Protocols:") shows all protocols
that libcurl reports to support.
The third line (starts with "Features:") shows specific features
libcurl reports to offer. Available features include:
alt-svc
Support for the Alt-Svc: header is provided.
AsynchDNS
This curl uses asynchronous name resolves. Asynchronous
name resolves can be done using either the c-ares or the
threaded resolver backends.
brotli Support for automatic brotli compression over HTTP(S).
CharConv
curl was built with support for character set conversions
(like EBCDIC)
Debug This curl uses a libcurl built with Debug. This enables
more error-tracking and memory debugging etc. For curl-
developers only!
gsasl The built-in SASL authentication includes extensions to
support SCRAM because libcurl was built with libgsasl.
GSS-API
GSS-API is supported.
HSTS HSTS support is present.
HTTP2 HTTP/2 support has been built-in.
HTTP3 HTTP/3 support has been built-in.
HTTPS-proxy
This curl is built to support HTTPS proxy.
IDN This curl supports IDN - international domain names.
IPv6 You can use IPv6 with this.
Kerberos
Kerberos V5 authentication is supported.
Largefile
This curl supports transfers of large files, files larger
than 2GB.
libz Automatic decompression (via gzip, deflate) of compressed
files over HTTP is supported.
Metalink
This curl supports Metalink.
MultiSSL
This curl supports multiple TLS backends.
NTLM NTLM authentication is supported.
NTLM_WB
NTLM delegation to winbind helper is supported.
PSL PSL is short for Public Suffix List and means that this
curl has been built with knowledge about "public
suffixes".
SPNEGO SPNEGO authentication is supported.
SSL SSL versions of various protocols are supported, such as
HTTPS, FTPS, POP3S and so on.
SSPI SSPI is supported.
TLS-SRP
SRP (Secure Remote Password) authentication is supported
for TLS.
TrackMemory
Debug memory tracking is supported.
Unicode
Unicode support on Windows.
UnixSockets
Unix sockets support is provided.
zstd Automatic decompression (via zstd) of compressed files
over HTTP is supported.
-w, --write-out <format>
Make curl display information on stdout after a completed
transfer. The format is a string that may contain plain text
mixed with any number of variables. The format can be specified
as a literal "string", or you can have curl read the format from
a file with "@filename" and to tell curl to read the format from
stdin you write "@-".
The variables present in the output format will be substituted
by the value or text that curl thinks fit, as described below.
All variables are specified as %{variable_name} and to output a
normal % you just write them as %%. You can output a newline by
using \n, a carriage return with \r and a tab space with \t.
The output will be written to standard output, but this can be
switched to standard error by using %{stderr}.
NOTE: The %-symbol is a special symbol in the win32-environment,
where all occurrences of % must be doubled when using this
option.
The variables available are:
content_type The Content-Type of the requested document, if
there was any.
errormsg The error message. (Added in 7.75.0)
exitcode The numerical exitcode of the transfer. (Added in
7.75.0)
filename_effective
The ultimate filename that curl writes out to.
This is only meaningful if curl is told to write
to a file with the -O, --remote-name or -o,
--output option. It's most useful in combination
with the -J, --remote-header-name option. (Added
in 7.26.0)
ftp_entry_path The initial path curl ended up in when logging on
to the remote FTP server. (Added in 7.15.4)
http_code The numerical response code that was found in the
last retrieved HTTP(S) or FTP(s) transfer. In
7.18.2 the alias response_code was added to show
the same info.
http_connect The numerical code that was found in the last
response (from a proxy) to a curl CONNECT
request. (Added in 7.12.4)
http_version The http version that was effectively used.
(Added in 7.50.0)
json A JSON object with all available keys.
local_ip The IP address of the local end of the most
recently done connection - can be either IPv4 or
IPv6 (Added in 7.29.0)
local_port The local port number of the most recently done
connection (Added in 7.29.0)
method The http method used in the most recent HTTP
request (Added in 7.72.0)
num_connects Number of new connects made in the recent
transfer. (Added in 7.12.3)
num_headers The number of response headers in the most recent
request (restarted at each
redirect). Note that the status line IS NOT a
header. (Added in 7.73.0)
num_redirects Number of redirects that were followed in the
request. (Added in 7.12.3)
onerror The rest of the output is only shown if the
transfer returned a non-zero error (Added in
7.75.0)
proxy_ssl_verify_result
The result of the HTTPS proxy's SSL peer
certificate verification that was requested. 0
means the verification was successful. (Added in
7.52.0)
redirect_url When an HTTP request was made without -L,
--location to follow redirects (or when --max-
redir is met), this variable will show the actual
URL a redirect would have gone to. (Added in
7.18.2)
referer The Referer: header, if there was any. (Added in
7.76.0)
remote_ip The remote IP address of the most recently done
connection - can be either IPv4 or IPv6 (Added in
7.29.0)
remote_port The remote port number of the most recently done
connection (Added in 7.29.0)
response_code The numerical response code that was found in the
last transfer (formerly known as "http_code").
(Added in 7.18.2)
scheme The URL scheme (sometimes called protocol) that
was effectively used (Added in 7.52.0)
size_download The total amount of bytes that were downloaded.
size_header The total amount of bytes of the downloaded
headers.
size_request The total amount of bytes that were sent in the
HTTP request.
size_upload The total amount of bytes that were uploaded.
speed_download The average download speed that curl measured for
the complete download. Bytes per second.
speed_upload The average upload speed that curl measured for
the complete upload. Bytes per second.
ssl_verify_result
The result of the SSL peer certificate
verification that was requested. 0 means the
verification was successful. (Added in 7.19.0)
stderr From this point on, the -w, --write-out output
will be written to standard error. (Added in
7.63.0)
stdout From this point on, the -w, --write-out output
will be written to standard output. This is the
default, but can be used to switch back after
switching to stderr. (Added in 7.63.0)
time_appconnect
The time, in seconds, it took from the start
until the SSL/SSH/etc connect/handshake to the
remote host was completed. (Added in 7.19.0)
time_connect The time, in seconds, it took from the start
until the TCP connect to the remote host (or
proxy) was completed.
time_namelookup
The time, in seconds, it took from the start
until the name resolving was completed.
time_pretransfer
The time, in seconds, it took from the start
until the file transfer was just about to begin.
This includes all pre-transfer commands and
negotiations that are specific to the particular
protocol(s) involved.
time_redirect The time, in seconds, it took for all redirection
steps including name lookup, connect, pretransfer
and transfer before the final transaction was
started. time_redirect shows the complete
execution time for multiple redirections. (Added
in 7.12.3)
time_starttransfer
The time, in seconds, it took from the start
until the first byte was just about to be
transferred. This includes time_pretransfer and
also the time the server needed to calculate the
result.
time_total The total time, in seconds, that the full
operation lasted.
url The URL that was fetched. (Added in 7.75.0)
urlnum The URL index number of this transfer, 0-indexed.
(Added in 7.75.0)
url_effective The URL that was fetched last. This is most
meaningful if you've told curl to follow
location: headers.
If this option is used several times, the last one will be used.
--xattr
When saving output to a file, this option tells curl to store
certain file metadata in extended file attributes. Currently,
the URL is stored in the xdg.origin.url attribute and, for HTTP,
the content type is stored in the mime_type attribute. If the
file system does not support extended attributes, a warning is
issued.
FILES
~/.curlrc
Default config file, see -K, --config for details.
ENVIRONMENT
The environment variables can be specified in lower case or upper case.
The lower case version has precedence. http_proxy is an exception as it
is only available in lower case.
Using an environment variable to set the proxy has the same effect as
using the -x, --proxy option.
http_proxy [protocol://]<host>[:port]
Sets the proxy server to use for HTTP.
HTTPS_PROXY [protocol://]<host>[:port]
Sets the proxy server to use for HTTPS.
[url-protocol]_PROXY [protocol://]<host>[:port]
Sets the proxy server to use for [url-protocol], where the
protocol is a protocol that curl supports and as specified in a
URL. FTP, FTPS, POP3, IMAP, SMTP, LDAP etc.
ALL_PROXY [protocol://]<host>[:port]
Sets the proxy server to use if no protocol-specific proxy is
set.
NO_PROXY <comma-separated list of hosts/domains>
list of host names that shouldn't go through any proxy. If set
to an asterisk '*' only, it matches all hosts. Each name in this
list is matched as either a domain name which contains the
hostname, or the hostname itself.
This environment variable disables use of the proxy even when
specified with the -x, --proxy option. That is
NO_PROXY=direct.example.com curl -x http://proxy.example.com
http://direct.example.com accesses the target URL directly, and
NO_PROXY=direct.example.com curl -x http://proxy.example.com
http://somewhere.example.com accesses the target URL through the
proxy.
The list of host names can also be include numerical IP
addresses, and IPv6 versions should then be given without
enclosing brackets.
IPv6 numerical addresses are compared as strings, so they will
only match if the representations are the same: "::1" is the
same as "::0:1" but they don't match.
CURL_SSL_BACKEND <TLS backend>
If curl was built with support for "MultiSSL", meaning that it
has built-in support for more than one TLS backend, this
environment variable can be set to the case insensitive name of
the particular backend to use when curl is invoked. Setting a
name that isn't a built-in alternative will make curl stay with
the default.
SSL backend names (case-insensitive): bearssl, gnutls, gskit,
mbedtls, mesalink, nss, openssl, rustls, schannel, secure-
transport, wolfssl
QLOGDIR <directory name>
If curl was built with HTTP/3 support, setting this environment
variable to a local directory will make curl produce qlogs in
that directory, using file names named after the destination
connection id (in hex). Do note that these files can become
rather large. Works with both QUIC backends.
SSLKEYLOGFILE <file name>
If you set this environment variable to a file name, curl will
store TLS secrets from its connections in that file when invoked
to enable you to analyze the TLS traffic in real time using
network analyzing tools such as Wireshark. This works with the
following TLS backends: OpenSSL, libressl, BoringSSL, GnuTLS,
NSS and wolfSSL.
PROXY PROTOCOL PREFIXES
Since curl version 7.21.7, the proxy string may be specified with a
protocol:// prefix to specify alternative proxy protocols.
If no protocol is specified in the proxy string or if the string
doesn't match a supported one, the proxy will be treated as an HTTP
proxy.
The supported proxy protocol prefixes are as follows:
http://
Makes it use it as an HTTP proxy. The default if no scheme
prefix is used.
https://
Makes it treated as an HTTPS proxy.
socks4://
Makes it the equivalent of --socks4
socks4a://
Makes it the equivalent of --socks4a
socks5://
Makes it the equivalent of --socks5
socks5h://
Makes it the equivalent of --socks5-hostname
EXIT CODES
There are a bunch of different error codes and their corresponding
error messages that may appear during bad conditions. At the time of
this writing, the exit codes are:
1 Unsupported protocol. This build of curl has no support for this
protocol.
2 Failed to initialize.
3 URL malformed. The syntax was not correct.
4 A feature or option that was needed to perform the desired
request was not enabled or was explicitly disabled at build-
time. To make curl able to do this, you probably need another
build of libcurl!
5 Couldn't resolve proxy. The given proxy host could not be
resolved.
6 Couldn't resolve host. The given remote host was not resolved.
7 Failed to connect to host.
8 Weird server reply. The server sent data curl couldn't parse.
9 FTP access denied. The server denied login or denied access to
the particular resource or directory you wanted to reach. Most
often you tried to change to a directory that doesn't exist on
the server.
10 FTP accept failed. While waiting for the server to connect back
when an active FTP session is used, an error code was sent over
the control connection or similar.
11 FTP weird PASS reply. Curl couldn't parse the reply sent to the
PASS request.
12 During an active FTP session while waiting for the server to
connect back to curl, the timeout expired.
13 FTP weird PASV reply, Curl couldn't parse the reply sent to the
PASV request.
14 FTP weird 227 format. Curl couldn't parse the 227-line the
server sent.
15 FTP can't get host. Couldn't resolve the host IP we got in the
227-line.
16 HTTP/2 error. A problem was detected in the HTTP2 framing layer.
This is somewhat generic and can be one out of several problems,
see the error message for details.
17 FTP couldn't set binary. Couldn't change transfer method to
binary.
18 Partial file. Only a part of the file was transferred.
19 FTP couldn't download/access the given file, the RETR (or
similar) command failed.
21 FTP quote error. A quote command returned error from the server.
22 HTTP page not retrieved. The requested url was not found or
returned another error with the HTTP error code being 400 or
above. This return code only appears if -f, --fail is used.
23 Write error. Curl couldn't write data to a local filesystem or
similar.
25 FTP couldn't STOR file. The server denied the STOR operation,
used for FTP uploading.
26 Read error. Various reading problems.
27 Out of memory. A memory allocation request failed.
28 Operation timeout. The specified time-out period was reached
according to the conditions.
30 FTP PORT failed. The PORT command failed. Not all FTP servers
support the PORT command, try doing a transfer using PASV
instead!
31 FTP couldn't use REST. The REST command failed. This command is
used for resumed FTP transfers.
33 HTTP range error. The range "command" didn't work.
34 HTTP post error. Internal post-request generation error.
35 SSL connect error. The SSL handshaking failed.
36 Bad download resume. Couldn't continue an earlier aborted
download.
37 FILE couldn't read file. Failed to open the file. Permissions?
38 LDAP cannot bind. LDAP bind operation failed.
39 LDAP search failed.
41 Function not found. A required LDAP function was not found.
42 Aborted by callback. An application told curl to abort the
operation.
43 Internal error. A function was called with a bad parameter.
45 Interface error. A specified outgoing interface could not be
used.
47 Too many redirects. When following redirects, curl hit the
maximum amount.
48 Unknown option specified to libcurl. This indicates that you
passed a weird option to curl that was passed on to libcurl and
rejected. Read up in the manual!
49 Malformed telnet option.
51 The peer's SSL certificate or SSH MD5 fingerprint was not OK.
52 The server didn't reply anything, which here is considered an
error.
53 SSL crypto engine not found.
54 Cannot set SSL crypto engine as default.
55 Failed sending network data.
56 Failure in receiving network data.
58 Problem with the local certificate.
59 Couldn't use specified SSL cipher.
60 Peer certificate cannot be authenticated with known CA
certificates.
61 Unrecognized transfer encoding.
62 Invalid LDAP URL.
63 Maximum file size exceeded.
64 Requested FTP SSL level failed.
65 Sending the data requires a rewind that failed.
66 Failed to initialise SSL Engine.
67 The user name, password, or similar was not accepted and curl
failed to log in.
68 File not found on TFTP server.
69 Permission problem on TFTP server.
70 Out of disk space on TFTP server.
71 Illegal TFTP operation.
72 Unknown TFTP transfer ID.
73 File already exists (TFTP).
74 No such user (TFTP).
75 Character conversion failed.
76 Character conversion functions required.
77 Problem with reading the SSL CA cert (path? access rights?).
78 The resource referenced in the URL does not exist.
79 An unspecified error occurred during the SSH session.
80 Failed to shut down the SSL connection.
82 Could not load CRL file, missing or wrong format (added in
7.19.0).
83 Issuer check failed (added in 7.19.0).
84 The FTP PRET command failed
85 RTSP: mismatch of CSeq numbers
86 RTSP: mismatch of Session Identifiers
87 unable to parse FTP file list
88 FTP chunk callback reported error
89 No connection available, the session will be queued
90 SSL public key does not matched pinned public key
91 Invalid SSL certificate status.
92 Stream error in HTTP/2 framing layer.
93 An API function was called from inside a callback.
94 An authentication function returned an error.
95 A problem was detected in the HTTP/3 layer. This is somewhat
generic and can be one out of several problems, see the error
message for details.
96 QUIC connection error. This error may be caused by an SSL
library error. QUIC is the protocol used for HTTP/3 transfers.
XX More error codes will appear here in future releases. The
existing ones are meant to never change.
AUTHORS / CONTRIBUTORS
Daniel Stenberg is the main author, but the whole list of contributors
is found in the separate THANKS file.
WWW
https://curl.se
SEE ALSO
ftp(1), wget(1)
Curl 7.77.0 November 16, 2016 curl(1)
man2web Home...