drill(1) FreeBSD General Commands Manual drill(1)
NAME
drill - get (debug) information out of DNS(SEC)
SYNOPSIS
drill [ OPTIONS ] name [ @server ] [ type ] [ class ]
DESCRIPTION
drill is a tool to designed to get all sorts of information out of the
DNS. It is specificly designed to be used with DNSSEC.
The name drill is a pun on dig. With drill you should be able get even
more information than with dig.
If no arguments are given class defaults to 'IN' and type to 'A'. The
server(s) specified in /etc/resolv.conf are used to query against.
name Ask for this name.
@server Send to query to this server. If not specified use the
nameservers from /etc/resolv.conf.
type Ask for this RR type. If type is not given on the command line it
defaults to 'A'. Except when doing a reverse lookup when it defaults to
'PTR'.
class Use this class when querying.
SAMPLE USAGE
drill mx miek.nl Show the MX records of the domain miek.nl
drill -S jelte.nlnetlabs.nl
Chase any signatures in the jelte.nlnetlab.nl domain. This
option is only available when ldns has been compiled with
openssl-support.
drill -TD www.example.com
Do a DNSSEC (-D) trace (-T) from the rootservers down to
www.example.com. This option only works when ldns has been
compiled with openssl support.
drill -s dnskey jelte.nlnetlabs.nl
Show the DNSKEY record(s) for jelte.nlnetlabs.nl. For each found
DNSKEY record also print the DS record.
OPTIONS
-D Enable DNSSEC in the query. When querying for DNSSEC types
(DNSKEY, RRSIG, DS and NSEC) this is not automatically enabled.
-T Trace name from the root down. When using this option the
@server arguments is not used.
-S Chase the signature(s) of 'name' to a known key or as high up in
the tree as possible.
-I IPv4 or IPv6 address
Source address to query from. The source address has to be
present on an interface of the host running drill.
-V level
Be more verbose. Set level to 5 to see the actual query that is
sent.
-Q Quiet mode, this overrules -V.
-f file
Read the query from a file. The query must be dumped with -w.
-i file
read the answer from the file instead from the network. This
aids in debugging and can be used to check if a query on disk is
valid. If the file contains binary data it is assumed to be a
query in network order.
-w file
Write an answer packet to file.
-q file
Write the query packet to file.
-v Show drill's version.
-h Show a short help message.
QUERY OPTIONS
-4 Stay on ip4. Only send queries to ip4 enabled nameservers.
-6 Stay on ip6. Only send queries to ip6 enabled nameservers.
-a Use the resolver structure's fallback mechanism if the answer is
truncated (TC=1). If a truncated packet is received and this
option is set, drill will first send a new query with EDNS0
buffer size 4096.
If the EDNS0 buffer size was already set to 512+ bytes, or the
above retry also results in a truncated answer, the resolver
structure will fall back to TCP.
-b size
Use size as the buffer size in the EDNS0 pseudo RR.
-c file
Use file instead of /etc/resolv.conf for nameserver
configuration.
-d domain
When tracing (-T), start from this domain instead of the root.
-t Use TCP/IP when querying a server
-k keyfile
Use this file to read a (trusted) key from. When this options is
given drill tries to validate the current answer with this key.
No chasing is done. When drill is doing a secure trace, this key
will be used as trust anchor. Can contain a DNSKEY or a DS
record.
Alternatively, when DNSSEC enabled tracing (-TD) or signature
chasing (-S), if -k is not specified, and a default trust anchor
(/etc/unbound/root.key) exists and contains a valid DNSKEY or DS
record, it will be used as the trust anchor.
-o mnemonic
Use this option to set or unset specific header bits. A bit is
set by using the bit mnemonic in CAPITAL letters. A bit is unset
when the mnemonic is given in lowercase. The following mnemonics
are understood by drill:
QR, qr: set, unset QueRy (default: on)
AA, aa: set, unset Authoritative Answer (default: off)
TC, tc: set, unset TrunCated (default: off)
RD, rd: set, unset Recursion Desired (default: on)
CD, cd: set, unset Checking Disabled (default: off)
RA, ra: set, unset Recursion Available (default: off)
AD, ad: set, unset Authenticated Data (default: off)
Thus: -o CD, will enable Checking Disabled, which instructs the
cache to not validate the answers it gives out.
-p port
Use this port instead of the default of 53.
-r file
When tracing (-T), use file as a root servers hint file.
-s When encountering a DNSKEY print the equivalent DS also.
-u Use UDP when querying a server. This is the default.
-w file
write the answer to a file. The file will contain a hexadecimal
dump of the query. This can be used in conjunction with -f.
-x Do a reverse lookup. The type argument is not used, it is preset
to PTR.
-y <name:key[:algo]>
specify named base64 tsig key, and optional an algorithm
(defaults to hmac-md5.sig-alg.reg.int)
-z don't randomize the nameserver list before sending queries.
EXIT STATUS
The exit status is 0 if the looked up answer is secure and trusted, or
insecure. The exit status is not 0 if the looked up answer is
untrusted or bogus, or an error occurred while performing the lookup.
FILES
/etc/unbound/root.key
The file from which trusted keys are loaded when no -k option is
given.
SEE ALSO
unbound-anchor(8)
AUTHOR
Jelte Jansen and Miek Gieben. Both of NLnet Labs.
REPORTING BUGS
Report bugs to <ldns-team@nlnetlabs.nl>.
BUGS
COPYRIGHT
Copyright (c) 2004-2008 NLnet Labs. Licensed under the revised BSD
license. There is NO warranty; not even for MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
SEE ALSO
dig(1), RFC403{3,4,5}.
28 May 2006 drill(1)
man2web Home...