HOSTAPD(8)              FreeBSD System Manager's Manual             HOSTAPD(8)

NAME
     hostapd - authenticator for IEEE 802.11 networks

SYNOPSIS
     hostapd [-BdhKtv] [-P pidfile] config-file ...

DESCRIPTION
     The hostapd utility is an authenticator for IEEE 802.11 networks.  It
     provides full support for WPA/IEEE 802.11i and can also act as an IEEE
     802.1X Authenticator with a suitable backend Authentication Server
     (typically FreeRADIUS).  The hostapd utility implements the
     authentication protocols that piggyback on top of the normal IEEE 802.11
     protocol mechanisms.  To use hostapd as an authenticator, the underlying
     device must support some basic functionality such as the ability to set
     security information in the 802.11 management frames.  Beware that not
     all devices have this support.

     The hostapd utility is designed to be a "daemon" program that runs in the
     background and acts as the backend component controlling the wireless
     connection.  It supports separate frontend programs such as the text-
     based frontend, hostapd_cli(8).

     The following arguments must be specified on the command line:

     config-file
             Use the settings in the specified configuration file; the name of
             the specified wireless interface is contained in this file.  See
             hostapd.conf(5) for a description of the configuration file
             syntax.

             Changes to the configuration file can be reloaded by sending a
             SIGHUP to the hostapd processor or with the hostapd_cli(8)
             utility, using "hostapd_cli reconfigure".

OPTIONS
     The options are as follows:

     -d      Enable debugging messages.  If this option is supplied twice,
             more verbose messages are displayed.

     -h      Show help text.

     -t      Include timestamps in debugging output.

     -v      Display version information on the terminal and exit.

     -B      Detach from the controlling terminal and run as a daemon process
             in the background.

     -K      Include key information in debugging output.

     -P pidfile
             Store PID in pidfile.

SEE ALSO
     ath(4), ipw(4), iwi(4), mwl(4), ral(4), rum(4), run(4), ural(4), wi(4),
     hostapd.conf(5), hostapd_cli(8), ifconfig(8)

HISTORY
     The hostapd utility first appeared in FreeBSD 6.0.

AUTHORS
     The hostapd utility was written by Jouni Malinen <j@w1.fi>.  This manual
     page is derived from the README file included in the hostapd
     distribution.

FreeBSD 13.1-RELEASE-p6          July 18, 2012         FreeBSD 13.1-RELEASE-p6