PMC.WESTMEREUC(3) FreeBSD Library Functions Manual PMC.WESTMEREUC(3)
NAME
pmc.westmere - uncore measurement events for Intel Westmere family CPUs
LIBRARY
Performance Counters Library (libpmc, -lpmc)
SYNOPSIS
#include <pmc.h>
DESCRIPTION
Intel Westmere CPUs contain PMCs conforming to version 2 of the Intel
performance measurement architecture. These CPUs contain two classes of
PMCs:
PMC_CLASS_UCF Fixed-function counters that count only one hardware
event per counter.
PMC_CLASS_UCP Programmable counters that may be configured to count
one of a defined set of hardware events.
The number of PMCs available in each class and their widths need to be
determined at run time by calling pmc_cpuinfo(3).
Intel Westmere PMCs are documented in Volume 3B: System Programming
Guide, Part 2, Intel(R) 64 and IA-32 Architectures Software Developes
Manual, Order Number: 253669-033US, Intel Corporation, December 2009.
WESTMERE UNCORE FIXED FUNCTION PMCS
These PMCs and their supported events are documented in pmc.ucf(3). Not
all CPUs in this family implement fixed-function counters.
WESTMERE UNCORE PROGRAMMABLE PMCS
The programmable PMCs support the following capabilities:
Capability Support
PMC_CAP_CASCADE No
PMC_CAP_EDGE Yes
PMC_CAP_INTERRUPT No
PMC_CAP_INVERT Yes
PMC_CAP_READ Yes
PMC_CAP_PRECISE No
PMC_CAP_SYSTEM No
PMC_CAP_TAGGING No
PMC_CAP_THRESHOLD Yes
PMC_CAP_USER No
PMC_CAP_WRITE Yes
Event Qualifiers
Event specifiers for these PMCs support the following common qualifiers:
cmask=value
Configure the PMC to increment only if the number of configured
events measured in a cycle is greater than or equal to value.
edge Configure the PMC to count the number of de-asserted to asserted
transitions of the conditions expressed by the other qualifiers.
If specified, the counter will increment only once whenever a
condition becomes true, irrespective of the number of clocks
during which the condition remains true.
inv Invert the sense of comparison when the "cmask" qualifier is
present, making the counter increment when the number of events
per cycle is less than the value specified by the "cmask"
qualifier.
Event Specifiers (Programmable PMCs)
Westmere uncore programmable PMCs support the following events:
GQ_CYCLES_FULL.READ_TRACKER
(Event 00H, Umask 01H) Uncore cycles Global Queue read tracker is
full.
GQ_CYCLES_FULL.WRITE_TRACKER
(Event 00H, Umask 02H) Uncore cycles Global Queue write tracker
is full.
GQ_CYCLES_FULL.PEER_PROBE_TRACKER
(Event 00H, Umask 04H) Uncore cycles Global Queue peer probe
tracker is full. The peer probe tracker queue tracks snoops from
the IOH and remote sockets.
GQ_CYCLES_NOT_EMPTY.READ_TRACKER
(Event 01H, Umask 01H) Uncore cycles were Global Queue read
tracker has at least one valid entry.
GQ_CYCLES_NOT_EMPTY.WRITE_TRACKER
(Event 01H, Umask 02H) Uncore cycles were Global Queue write
tracker has at least one valid entry.
GQ_CYCLES_NOT_EMPTY.PEER_PROBE_TRACKER
(Event 01H, Umask 04H) Uncore cycles were Global Queue peer probe
tracker has at least one valid entry. The peer probe tracker
queue tracks IOH and remote socket snoops.
GQ_OCCUPANCY.READ_TRACKER
(Event 02H, Umask 01H) Increments the number of queue entries
(code read, data read, and RFOs) in the tread tracker. The GQ
read tracker allocate to deallocate occupancy count is divided by
the count to obtain the average read tracker latency.
GQ_ALLOC.READ_TRACKER
(Event 03H, Umask 01H) Counts the number of tread tracker
allocate to deallocate entries. The GQ read tracker allocate to
deallocate occupancy count is divided by the count to obtain the
average read tracker latency.
GQ_ALLOC.RT_L3_MISS
(Event 03H, Umask 02H) Counts the number GQ read tracker entries
for which a full cache line read has missed the L3. The GQ read
tracker L3 miss to fill occupancy count is divided by this count
to obtain the average cache line read L3 miss latency. The
latency represents the time after which the L3 has determined
that the cache line has missed. The time between a GQ read
tracker allocation and the L3 determining that the cache line has
missed is the average L3 hit latency. The total L3 cache line
read miss latency is the hit latency + L3 miss latency.
GQ_ALLOC.RT_TO_L3_RESP
(Event 03H, Umask 04H) Counts the number of GQ read tracker
entries that are allocated in the read tracker queue that hit or
miss the L3. The GQ read tracker L3 hit occupancy count is
divided by this count to obtain the average L3 hit latency.
GQ_ALLOC.RT_TO_RTID_ACQUIRED
(Event 03H, Umask 08H) Counts the number of GQ read tracker
entries that are allocated in the read tracker, have missed in
the L3 and have not acquired a Request Transaction ID. The GQ
read tracker L3 miss to RTID acquired occupancy count is divided
by this count to obtain the average latency for a read L3 miss to
acquire an RTID.
GQ_ALLOC.WT_TO_RTID_ACQUIRED
(Event 03H, Umask 10H) Counts the number of GQ write tracker
entries that are allocated in the write tracker, have missed in
the L3 and have not acquired a Request Transaction ID. The GQ
write tracker L3 miss to RTID occupancy count is divided by this
count to obtain the average latency for a write L3 miss to
acquire an RTID.
GQ_ALLOC.WRITE_TRACKER
(Event 03H, Umask 20H) Counts the number of GQ write tracker
entries that are allocated in the write tracker queue that miss
the L3. The GQ write tracker occupancy count is divided by the
this count to obtain the average L3 write miss latency.
GQ_ALLOC.PEER_PROBE_TRACKER
(Event 03H, Umask 40H) Counts the number of GQ peer probe tracker
(snoop) entries that are allocated in the peer probe tracker
queue that miss the L3. The GQ peer probe occupancy count is
divided by this count to obtain the average L3 peer probe miss
latency.
GQ_DATA.FROM_QPI
(Event 04H, Umask 01H) Cycles Global Queue Quickpath Interface
input data port is busy importing data from the Quickpath
Interface. Each cycle the input port can transfer 8 or 16 bytes
of data.
GQ_DATA.FROM_QMC
(Event 04H, Umask 02H) Cycles Global Queue Quickpath Memory
Interface input data port is busy importing data from the
Quickpath Memory Interface. Each cycle the input port can
transfer 8 or 16 bytes of data.
GQ_DATA.FROM_L3
(Event 04H, Umask 04H) Cycles GQ L3 input data port is busy
importing data from the Last Level Cache. Each cycle the input
port can transfer 32 bytes of data.
GQ_DATA.FROM_CORES_02
(Event 04H, Umask 08H) Cycles GQ Core 0 and 2 input data port is
busy importing data from processor cores 0 and 2. Each cycle the
input port can transfer 32 bytes of data.
GQ_DATA.FROM_CORES_13
(Event 04H, Umask 10H) Cycles GQ Core 1 and 3 input data port is
busy importing data from processor cores 1 and 3. Each cycle the
input port can transfer 32 bytes of data.
GQ_DATA.TO_QPI_QMC
(Event 05H, Umask 01H) Cycles GQ QPI and QMC output data port is
busy sending data to the Quickpath Interface or Quickpath Memory
Interface. Each cycle the output port can transfer 32 bytes of
data.
GQ_DATA.TO_L3
(Event 05H, Umask 02H) Cycles GQ L3 output data port is busy
sending data to the Last Level Cache. Each cycle the output port
can transfer 32 bytes of data.
GQ_DATA.TO_CORES
(Event 05H, Umask 04H) Cycles GQ Core output data port is busy
sending data to the Cores. Each cycle the output port can
transfer 32 bytes of data.
SNP_RESP_TO_LOCAL_HOME.I_STATE
(Event 06H, Umask 01H) Number of snoop responses to the local
home that L3 does not have the referenced cache line.
SNP_RESP_TO_LOCAL_HOME.S_STATE
(Event 06H, Umask 02H) Number of snoop responses to the local
home that L3 has the referenced line cached in the S state.
SNP_RESP_TO_LOCAL_HOME.FWD_S_STATE
(Event 06H, Umask 04H) Number of responses to code or data read
snoops to the local home that the L3 has the referenced cache
line in the E state. The L3 cache line state is changed to the S
state and the line is forwarded to the local home in the S state.
SNP_RESP_TO_LOCAL_HOME.FWD_I_STATE
(Event 06H, Umask 08H) Number of responses to read invalidate
snoops to the local home that the L3 has the referenced cache
line in the M state. The L3 cache line state is invalidated and
the line is forwarded to the local home in the M state.
SNP_RESP_TO_LOCAL_HOME.CONFLICT
(Event 06H, Umask 10H) Number of conflict snoop responses sent to
the local home.
SNP_RESP_TO_LOCAL_HOME.WB
(Event 06H, Umask 20H) Number of responses to code or data read
snoops to the local home that the L3 has the referenced line
cached in the M state.
SNP_RESP_TO_REMOTE_HOME.I_STATE
(Event 07H, Umask 01H) Number of snoop responses to a remote home
that L3 does not have the referenced cache line.
SNP_RESP_TO_REMOTE_HOME.S_STATE
(Event 07H, Umask 02H) Number of snoop responses to a remote home
that L3 has the referenced line cached in the S state.
SNP_RESP_TO_REMOTE_HOME.FWD_S_STATE
(Event 07H, Umask 04H) Number of responses to code or data read
snoops to a remote home that the L3 has the referenced cache line
in the E state. The L3 cache line state is changed to the S
state and the line is forwarded to the remote home in the S
state.
SNP_RESP_TO_REMOTE_HOME.FWD_I_STATE
(Event 07H, Umask 08H) Number of responses to read invalidate
snoops to a remote home that the L3 has the referenced cache line
in the M state. The L3 cache line state is invalidated and the
line is forwarded to the remote home in the M state.
SNP_RESP_TO_REMOTE_HOME.CONFLICT
(Event 07H, Umask 10H) Number of conflict snoop responses sent to
the local home.
SNP_RESP_TO_REMOTE_HOME.WB
(Event 07H, Umask 20H) Number of responses to code or data read
snoops to a remote home that the L3 has the referenced line
cached in the M state.
SNP_RESP_TO_REMOTE_HOME.HITM
(Event 07H, Umask 24H) Number of HITM snoop responses to a remote
home.
L3_HITS.READ
(Event 08H, Umask 01H) Number of code read, data read and RFO
requests that hit in the L3.
L3_HITS.WRITE
(Event 08H, Umask 02H) Number of writeback requests that hit in
the L3. Writebacks from the cores will always result in L3 hits
due to the inclusive property of the L3.
L3_HITS.PROBE
(Event 08H, Umask 04H) Number of snoops from IOH or remote
sockets that hit in the L3.
L3_HITS.ANY
(Event 08H, Umask 03H) Number of reads and writes that hit the
L3.
L3_MISS.READ
(Event 09H, Umask 01H) Number of code read, data read and RFO
requests that miss the L3.
L3_MISS.WRITE
(Event 09H, Umask 02H) Number of writeback requests that miss the
L3. Should always be zero as writebacks from the cores will
always result in L3 hits due to the inclusive property of the L3.
L3_MISS.PROBE
(Event 09H, Umask 04H) Number of snoops from IOH or remote
sockets that miss the L3.
L3_MISS.ANY
(Event 09H, Umask 03H) Number of reads and writes that miss the
L3.
L3_LINES_IN.M_STATE
(Event 0AH, Umask 01H) Counts the number of L3 lines allocated in
M state. The only time a cache line is allocated in the M state
is when the line was forwarded in M state is forwarded due to a
Snoop Read Invalidate Own request.
L3_LINES_IN.E_STATE
(Event 0AH, Umask 02H) Counts the number of L3 lines allocated in
E state.
L3_LINES_IN.S_STATE
(Event 0AH, Umask 04H) Counts the number of L3 lines allocated in
S state.
L3_LINES_IN.F_STATE
(Event 0AH, Umask 08H) Counts the number of L3 lines allocated in
F state.
L3_LINES_IN.ANY
(Event 0AH, Umask 0FH) Counts the number of L3 lines allocated in
any state.
L3_LINES_OUT.M_STATE
(Event 0BH, Umask 01H) Counts the number of L3 lines victimized
that were in the M state. When the victim cache line is in M
state, the line is written to its home cache agent which can be
either local or remote.
L3_LINES_OUT.E_STATE
(Event 0BH, Umask 02H) Counts the number of L3 lines victimized
that were in the E state.
L3_LINES_OUT.S_STATE
(Event 0BH, Umask 04H) Counts the number of L3 lines victimized
that were in the S state.
L3_LINES_OUT.I_STATE
(Event 0BH, Umask 08H) Counts the number of L3 lines victimized
that were in the I state.
L3_LINES_OUT.F_STATE
(Event 0BH, Umask 10H) Counts the number of L3 lines victimized
that were in the F state.
L3_LINES_OUT.ANY
(Event 0BH, Umask 1FH) Counts the number of L3 lines victimized
in any state.
GQ_SNOOP.GOTO_S
(Event 0CH, Umask 01H) Counts the number of remote snoops that
have requested a cache line be set to the S state.
GQ_SNOOP.GOTO_I
(Event 0CH, Umask 02H) Counts the number of remote snoops that
have requested a cache line be set to the I state.
GQ_SNOOP.GOTO_S_HIT_E
(Event 0CH, Umask 04H) Counts the number of remote snoops that
have requested a cache line be set to the S state from E state.
Requires writing MSR 301H with mask = 2H
GQ_SNOOP.GOTO_S_HIT_F
(Event 0CH, Umask 04H) Counts the number of remote snoops that
have requested a cache line be set to the S state from F
(forward) state. Requires writing MSR 301H with mask = 8H
GQ_SNOOP.GOTO_S_HIT_M
(Event 0CH, Umask 04H) Counts the number of remote snoops that
have requested a cache line be set to the S state from M state.
Requires writing MSR 301H with mask = 1H
GQ_SNOOP.GOTO_S_HIT_S
(Event 0CH, Umask 04H) Counts the number of remote snoops that
have requested a cache line be set to the S state from S state.
Requires writing MSR 301H with mask = 4H
GQ_SNOOP.GOTO_I_HIT_E
(Event 0CH, Umask 08H) Counts the number of remote snoops that
have requested a cache line be set to the I state from E state.
Requires writing MSR 301H with mask = 2H
GQ_SNOOP.GOTO_I_HIT_F
(Event 0CH, Umask 08H) Counts the number of remote snoops that
have requested a cache line be set to the I state from F
(forward) state. Requires writing MSR 301H with mask = 8H
GQ_SNOOP.GOTO_I_HIT_M
(Event 0CH, Umask 08H) Counts the number of remote snoops that
have requested a cache line be set to the I state from M state.
Requires writing MSR 301H with mask = 1H
GQ_SNOOP.GOTO_I_HIT_S
(Event 0CH, Umask 08H) Counts the number of remote snoops that
have requested a cache line be set to the I state from S state.
Requires writing MSR 301H with mask = 4H
QHL_REQUESTS.IOH_READS
(Event 20H, Umask 01H) Counts number of Quickpath Home Logic read
requests from the IOH.
QHL_REQUESTS.IOH_WRITES
(Event 20H, Umask 02H) Counts number of Quickpath Home Logic
write requests from the IOH.
QHL_REQUESTS.REMOTE_READS
(Event 20H, Umask 04H) Counts number of Quickpath Home Logic read
requests from a remote socket.
QHL_REQUESTS.REMOTE_WRITES
(Event 20H, Umask 08H) Counts number of Quickpath Home Logic
write requests from a remote socket.
QHL_REQUESTS.LOCAL_READS
(Event 20H, Umask 10H) Counts number of Quickpath Home Logic read
requests from the local socket.
QHL_REQUESTS.LOCAL_WRITES
(Event 20H, Umask 20H) Counts number of Quickpath Home Logic
write requests from the local socket.
QHL_CYCLES_FULL.IOH
(Event 21H, Umask 01H) Counts uclk cycles all entries in the
Quickpath Home Logic IOH are full.
QHL_CYCLES_FULL.REMOTE
(Event 21H, Umask 02H) Counts uclk cycles all entries in the
Quickpath Home Logic remote tracker are full.
QHL_CYCLES_FULL.LOCAL
(Event 21H, Umask 04H) Counts uclk cycles all entries in the
Quickpath Home Logic local tracker are full.
QHL_CYCLES_NOT_EMPTY.IOH
(Event 22H, Umask 01H) Counts uclk cycles all entries in the
Quickpath Home Logic IOH is busy.
QHL_CYCLES_NOT_EMPTY.REMOTE
(Event 22H, Umask 02H) Counts uclk cycles all entries in the
Quickpath Home Logic remote tracker is busy.
QHL_CYCLES_NOT_EMPTY.LOCAL
(Event 22H, Umask 04H) Counts uclk cycles all entries in the
Quickpath Home Logic local tracker is busy.
QHL_OCCUPANCY.IOH
(Event 23H, Umask 01H) QHL IOH tracker allocate to deallocate
read occupancy.
QHL_OCCUPANCY.REMOTE
(Event 23H, Umask 02H) QHL remote tracker allocate to deallocate
read occupancy.
QHL_OCCUPANCY.LOCAL
(Event 23H, Umask 04H) QHL local tracker allocate to deallocate
read occupancy.
QHL_ADDRESS_CONFLICTS.2WAY
(Event 24H, Umask 02H) Counts number of QHL Active Address Table
(AAT) entries that saw a max of 2 conflicts. The AAT is a
structure that tracks requests that are in conflict. The
requests themselves are in the home tracker entries. The count
is reported when an AAT entry deallocates.
QHL_ADDRESS_CONFLICTS.3WAY
(Event 24H, Umask 04H) Counts number of QHL Active Address Table
(AAT) entries that saw a max of 3 conflicts. The AAT is a
structure that tracks requests that are in conflict. The
requests themselves are in the home tracker entries. The count
is reported when an AAT entry deallocates.
QHL_CONFLICT_CYCLES.IOH
(Event 25H, Umask 01H) Counts cycles the Quickpath Home Logic IOH
Tracker contains two or more requests with an address conflict.
A max of 3 requests can be in conflict.
QHL_CONFLICT_CYCLES.REMOTE
(Event 25H, Umask 02H) Counts cycles the Quickpath Home Logic
Remote Tracker contains two or more requests with an address
conflict. A max of 3 requests can be in conflict.
QHL_CONFLICT_CYCLES.LOCAL
(Event 25H, Umask 04H) Counts cycles the Quickpath Home Logic
Local Tracker contains two or more requests with an address
conflict. A max of 3 requests can be in conflict.
QHL_TO_QMC_BYPASS
(Event 26H, Umask 01H) Counts number or requests to the Quickpath
Memory Controller that bypass the Quickpath Home Logic. All
local accesses can be bypassed. For remote requests, only read
requests can be bypassed.
QMC_ISOC_FULL.READ.CH0
(Event 28H, Umask 01H) Counts cycles all the entries in the DRAM
channel 0 high priority queue are occupied with isochronous read
requests.
QMC_ISOC_FULL.READ.CH1
(Event 28H, Umask 02H) Counts cycles all the entries in the DRAM
channel 1 high priority queue are occupied with isochronous read
requests.
QMC_ISOC_FULL.READ.CH2
(Event 28H, Umask 04H) Counts cycles all the entries in the DRAM
channel 2 high priority queue are occupied with isochronous read
requests.
QMC_ISOC_FULL.WRITE.CH0
(Event 28H, Umask 08H) Counts cycles all the entries in the DRAM
channel 0 high priority queue are occupied with isochronous write
requests.
QMC_ISOC_FULL.WRITE.CH1
(Event 28H, Umask 10H) Counts cycles all the entries in the DRAM
channel 1 high priority queue are occupied with isochronous write
requests.
QMC_ISOC_FULL.WRITE.CH2
(Event 28H, Umask 20H) Counts cycles all the entries in the DRAM
channel 2 high priority queue are occupied with isochronous write
requests.
QMC_BUSY.READ.CH0
(Event 29H, Umask 01H) Counts cycles where Quickpath Memory
Controller has at least 1 outstanding read request to DRAM
channel 0.
QMC_BUSY.READ.CH1
(Event 29H, Umask 02H) Counts cycles where Quickpath Memory
Controller has at least 1 outstanding read request to DRAM
channel 1.
QMC_BUSY.READ.CH2
(Event 29H, Umask 04H) Counts cycles where Quickpath Memory
Controller has at least 1 outstanding read request to DRAM
channel 2.
QMC_BUSY.WRITE.CH0
(Event 29H, Umask 08H) Counts cycles where Quickpath Memory
Controller has at least 1 outstanding write request to DRAM
channel 0.
QMC_BUSY.WRITE.CH1
(Event 29H, Umask 10H) Counts cycles where Quickpath Memory
Controller has at least 1 outstanding write request to DRAM
channel 1.
QMC_BUSY.WRITE.CH2
(Event 29H, Umask 20H) Counts cycles where Quickpath Memory
Controller has at least 1 outstanding write request to DRAM
channel 2.
QMC_OCCUPANCY.CH0
(Event 2AH, Umask 01H) IMC channel 0 normal read request
occupancy.
QMC_OCCUPANCY.CH1
(Event 2AH, Umask 02H) IMC channel 1 normal read request
occupancy.
QMC_OCCUPANCY.CH2
(Event 2AH, Umask 04H) IMC channel 2 normal read request
occupancy.
QMC_OCCUPANCY.ANY
(Event 2AH, Umask 07H) Normal read request occupancy for any
channel.
QMC_ISSOC_OCCUPANCY.CH0
(Event 2BH, Umask 01H) IMC channel 0 issoc read request
occupancy.
QMC_ISSOC_OCCUPANCY.CH1
(Event 2BH, Umask 02H) IMC channel 1 issoc read request
occupancy.
QMC_ISSOC_OCCUPANCY.CH2
(Event 2BH, Umask 04H) IMC channel 2 issoc read request
occupancy.
QMC_ISSOC_READS.ANY
(Event 2BH, Umask 07H) IMC issoc read request occupancy.
QMC_NORMAL_READS.CH0
(Event 2CH, Umask 01H) Counts the number of Quickpath Memory
Controller channel 0 medium and low priority read requests. The
QMC channel 0 normal read occupancy divided by this count
provides the average QMC channel 0 read latency.
QMC_NORMAL_READS.CH1
(Event 2CH, Umask 02H) Counts the number of Quickpath Memory
Controller channel 1 medium and low priority read requests. The
QMC channel 1 normal read occupancy divided by this count
provides the average QMC channel 1 read latency.
QMC_NORMAL_READS.CH2
(Event 2CH, Umask 04H) Counts the number of Quickpath Memory
Controller channel 2 medium and low priority read requests. The
QMC channel 2 normal read occupancy divided by this count
provides the average QMC channel 2 read latency.
QMC_NORMAL_READS.ANY
(Event 2CH, Umask 07H) Counts the number of Quickpath Memory
Controller medium and low priority read requests. The QMC normal
read occupancy divided by this count provides the average QMC
read latency.
QMC_HIGH_PRIORITY_READS.CH0
(Event 2DH, Umask 01H) Counts the number of Quickpath Memory
Controller channel 0 high priority isochronous read requests.
QMC_HIGH_PRIORITY_READS.CH1
(Event 2DH, Umask 02H) Counts the number of Quickpath Memory
Controller channel 1 high priority isochronous read requests.
QMC_HIGH_PRIORITY_READS.CH2
(Event 2DH, Umask 04H) Counts the number of Quickpath Memory
Controller channel 2 high priority isochronous read requests.
QMC_HIGH_PRIORITY_READS.ANY
(Event 2DH, Umask 07H) Counts the number of Quickpath Memory
Controller high priority isochronous read requests.
QMC_CRITICAL_PRIORITY_READS.CH0
(Event 2EH, Umask 01H) Counts the number of Quickpath Memory
Controller channel 0 critical priority isochronous read requests.
QMC_CRITICAL_PRIORITY_READS.CH1
(Event 2EH, Umask 02H) Counts the number of Quickpath Memory
Controller channel 1 critical priority isochronous read requests.
QMC_CRITICAL_PRIORITY_READS.CH2
(Event 2EH, Umask 04H) Counts the number of Quickpath Memory
Controller channel 2 critical priority isochronous read requests.
QMC_CRITICAL_PRIORITY_READS.ANY
(Event 2EH, Umask 07H) Counts the number of Quickpath Memory
Controller critical priority isochronous read requests.
QMC_WRITES.FULL.CH0
(Event 2FH, Umask 01H) Counts number of full cache line writes to
DRAM channel 0.
QMC_WRITES.FULL.CH1
(Event 2FH, Umask 02H) Counts number of full cache line writes to
DRAM channel 1.
QMC_WRITES.FULL.CH2
(Event 2FH, Umask 04H) Counts number of full cache line writes to
DRAM channel 2.
QMC_WRITES.FULL.ANY
(Event 2FH, Umask 07H) Counts number of full cache line writes to
DRAM.
QMC_WRITES.PARTIAL.CH0
(Event 2FH, Umask 08H) Counts number of partial cache line writes
to DRAM channel 0.
QMC_WRITES.PARTIAL.CH1
(Event 2FH, Umask 10H) Counts number of partial cache line writes
to DRAM channel 1.
QMC_WRITES.PARTIAL.CH2
(Event 2FH, Umask 20H) Counts number of partial cache line writes
to DRAM channel 2.
QMC_WRITES.PARTIAL.ANY
(Event 2FH, Umask 38H) Counts number of partial cache line writes
to DRAM.
QMC_CANCEL.CH0
(Event 30H, Umask 01H) Counts number of DRAM channel 0 cancel
requests.
QMC_CANCEL.CH1
(Event 30H, Umask 02H) Counts number of DRAM channel 1 cancel
requests.
QMC_CANCEL.CH2
(Event 30H, Umask 04H) Counts number of DRAM channel 2 cancel
requests.
QMC_CANCEL.ANY
(Event 30H, Umask 07H) Counts number of DRAM cancel requests.
QMC_PRIORITY_UPDATES.CH0
(Event 31H, Umask 01H) Counts number of DRAM channel 0 priority
updates. A priority update occurs when an ISOC high or critical
request is received by the QHL and there is a matching request
with normal priority that has already been issued to the QMC. In
this instance, the QHL will send a priority update to QMC to
expedite the request.
QMC_PRIORITY_UPDATES.CH1
(Event 31H, Umask 02H) Counts number of DRAM channel 1 priority
updates. A priority update occurs when an ISOC high or critical
request is received by the QHL and there is a matching request
with normal priority that has already been issued to the QMC. In
this instance, the QHL will send a priority update to QMC to
expedite the request.
QMC_PRIORITY_UPDATES.CH2
(Event 31H, Umask 04H) Counts number of DRAM channel 2 priority
updates. A priority update occurs when an ISOC high or critical
request is received by the QHL and there is a matching request
with normal priority that has already been issued to the QMC. In
this instance, the QHL will send a priority update to QMC to
expedite the request.
QMC_PRIORITY_UPDATES.ANY
(Event 31H, Umask 07H) Counts number of DRAM priority updates. A
priority update occurs when an ISOC high or critical request is
received by the QHL and there is a matching request with normal
priority that has already been issued to the QMC. In this
instance, the QHL will send a priority update to QMC to expedite
the request.
IMC_RETRY.CH0
(Event 32H, Umask 01H) Counts number of IMC DRAM channel 0
retries. DRAM retry only occurs when configured in RAS mode.
IMC_RETRY.CH1
(Event 32H, Umask 02H) Counts number of IMC DRAM channel 1
retries. DRAM retry only occurs when configured in RAS mode.
IMC_RETRY.CH2
(Event 32H, Umask 04H) Counts number of IMC DRAM channel 2
retries. DRAM retry only occurs when configured in RAS mode.
IMC_RETRY.ANY
(Event 32H, Umask 07H) Counts number of IMC DRAM retries from any
channel. DRAM retry only occurs when configured in RAS mode.
QHL_FRC_ACK_CNFLTS.IOH
(Event 33H, Umask 01H) Counts number of Force Acknowledge
Conflict messages sent by the Quickpath Home Logic to the IOH.
QHL_FRC_ACK_CNFLTS.REMOTE
(Event 33H, Umask 02H) Counts number of Force Acknowledge
Conflict messages sent by the Quickpath Home Logic to the remote
home.
QHL_FRC_ACK_CNFLTS.LOCAL
(Event 33H, Umask 04H) Counts number of Force Acknowledge
Conflict messages sent by the Quickpath Home Logic to the local
home.
QHL_FRC_ACK_CNFLTS.ANY
(Event 33H, Umask 07H) Counts number of Force Acknowledge
Conflict messages sent by the Quickpath Home Logic.
QHL_SLEEPS.IOH_ORDER
(Event 34H, Umask 01H) Counts number of occurrences a request was
put to sleep due to IOH ordering (write after read) conflicts.
While in the sleep state, the request is not eligible to be
scheduled to the QMC.
QHL_SLEEPS.REMOTE_ORDER
(Event 34H, Umask 02H) Counts number of occurrences a request was
put to sleep due to remote socket ordering (write after read)
conflicts. While in the sleep state, the request is not eligible
to be scheduled to the QMC.
QHL_SLEEPS.LOCAL_ORDER
(Event 34H, Umask 04H) Counts number of occurrences a request was
put to sleep due to local socket ordering (write after read)
conflicts. While in the sleep state, the request is not eligible
to be scheduled to the QMC.
QHL_SLEEPS.IOH_CONFLICT
(Event 34H, Umask 08H) Counts number of occurrences a request was
put to sleep due to IOH address conflicts. While in the sleep
state, the request is not eligible to be scheduled to the QMC.
QHL_SLEEPS.REMOTE_CONFLICT
(Event 34H, Umask 10H) Counts number of occurrences a request was
put to sleep due to remote socket address conflicts. While in
the sleep state, the request is not eligible to be scheduled to
the QMC.
QHL_SLEEPS.LOCAL_CONFLICT
(Event 34H, Umask 20H) Counts number of occurrences a request was
put to sleep due to local socket address conflicts. While in the
sleep state, the request is not eligible to be scheduled to the
QMC.
ADDR_OPCODE_MATCH.IOH
(Event 35H, Umask 01H) Counts number of requests from the IOH,
address/opcode of request is qualified by mask value written to
MSR 396H. The following mask values are supported: 0: NONE
40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
40001D00_00000000H:RSPIWB Match opcode/address by writing MSR
396H with mask supported mask value.
ADDR_OPCODE_MATCH.REMOTE
(Event 35H, Umask 02H) Counts number of requests from the remote
socket, address/opcode of request is qualified by mask value
written to MSR 396H. The following mask values are supported: 0:
NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
40001D00_00000000H:RSPIWB Match opcode/address by writing MSR
396H with mask supported mask value.
ADDR_OPCODE_MATCH.LOCAL
(Event 35H, Umask 04H) Counts number of requests from the local
socket, address/opcode of request is qualified by mask value
written to MSR 396H. The following mask values are supported: 0:
NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
40001D00_00000000H:RSPIWB Match opcode/address by writing MSR
396H with mask supported mask value.
QPI_TX_STALLED_SINGLE_FLIT.HOME.LINK_0
(Event 40H, Umask 01H) Counts cycles the Quickpath outbound link
0 HOME virtual channel is stalled due to lack of a VNA and VN0
credit. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.SNOOP.LINK_0
(Event 40H, Umask 02H) Counts cycles the Quickpath outbound link
0 SNOOP virtual channel is stalled due to lack of a VNA and VN0
credit. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.NDR.LINK_0
(Event 40H, Umask 04H) Counts cycles the Quickpath outbound link
0 non-data response virtual channel is stalled due to lack of a
VNA and VN0 credit. Note that this event does not filter out
when a flit would not have been selected for arbitration because
another virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.HOME.LINK_1
(Event 40H, Umask 08H) Counts cycles the Quickpath outbound link
1 HOME virtual channel is stalled due to lack of a VNA and VN0
credit. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.SNOOP.LINK_1
(Event 40H, Umask 10H) Counts cycles the Quickpath outbound link
1 SNOOP virtual channel is stalled due to lack of a VNA and VN0
credit. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.NDR.LINK_1
(Event 40H, Umask 20H) Counts cycles the Quickpath outbound link
1 non-data response virtual channel is stalled due to lack of a
VNA and VN0 credit. Note that this event does not filter out
when a flit would not have been selected for arbitration because
another virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.LINK_0
(Event 40H, Umask 07H) Counts cycles the Quickpath outbound link
0 virtual channels are stalled due to lack of a VNA and VN0
credit. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_SINGLE_FLIT.LINK_1
(Event 40H, Umask 38H) Counts cycles the Quickpath outbound link
1 virtual channels are stalled due to lack of a VNA and VN0
credit. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.DRS.LINK_0
(Event 41H, Umask 01H) Counts cycles the Quickpath outbound link
0 Data ResponSe virtual channel is stalled due to lack of VNA and
VN0 credits. Note that this event does not filter out when a
flit would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.NCB.LINK_0
(Event 41H, Umask 02H) Counts cycles the Quickpath outbound link
0 Non-Coherent Bypass virtual channel is stalled due to lack of
VNA and VN0 credits. Note that this event does not filter out
when a flit would not have been selected for arbitration because
another virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.NCS.LINK_0
(Event 41H, Umask 04H) Counts cycles the Quickpath outbound link
0 Non-Coherent Standard virtual channel is stalled due to lack of
VNA and VN0 credits. Note that this event does not filter out
when a flit would not have been selected for arbitration because
another virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.DRS.LINK_1
(Event 41H, Umask 08H) Counts cycles the Quickpath outbound link
1 Data ResponSe virtual channel is stalled due to lack of VNA and
VN0 credits. Note that this event does not filter out when a
flit would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.NCB.LINK_1
(Event 41H, Umask 10H) Counts cycles the Quickpath outbound link
1 Non-Coherent Bypass virtual channel is stalled due to lack of
VNA and VN0 credits. Note that this event does not filter out
when a flit would not have been selected for arbitration because
another virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.NCS.LINK_1
(Event 41H, Umask 20H) Counts cycles the Quickpath outbound link
1 Non-Coherent Standard virtual channel is stalled due to lack of
VNA and VN0 credits. Note that this event does not filter out
when a flit would not have been selected for arbitration because
another virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.LINK_0
(Event 41H, Umask 07H) Counts cycles the Quickpath outbound link
0 virtual channels are stalled due to lack of VNA and VN0
credits. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_STALLED_MULTI_FLIT.LINK_1
(Event 41H, Umask 38H) Counts cycles the Quickpath outbound link
1 virtual channels are stalled due to lack of VNA and VN0
credits. Note that this event does not filter out when a flit
would not have been selected for arbitration because another
virtual channel is getting arbitrated.
QPI_TX_HEADER.FULL.LINK_0
(Event 42H, Umask 01H) Number of cycles that the header buffer in
the Quickpath Interface outbound link 0 is full.
QPI_TX_HEADER.BUSY.LINK_0
(Event 42H, Umask 02H) Number of cycles that the header buffer in
the Quickpath Interface outbound link 0 is busy.
QPI_TX_HEADER.FULL.LINK_1
(Event 42H, Umask 04H) Number of cycles that the header buffer in
the Quickpath Interface outbound link 1 is full.
QPI_TX_HEADER.BUSY.LINK_1
(Event 42H, Umask 08H) Number of cycles that the header buffer in
the Quickpath Interface outbound link 1 is busy.
QPI_RX_NO_PPT_CREDIT.STALLS.LINK_0
(Event 43H, Umask 01H) Number of cycles that snoop packets
incoming to the Quickpath Interface link 0 are stalled and not
sent to the GQ because the GQ Peer Probe Tracker (PPT) does not
have any available entries.
QPI_RX_NO_PPT_CREDIT.STALLS.LINK_1
(Event 43H, Umask 02H) Number of cycles that snoop packets
incoming to the Quickpath Interface link 1 are stalled and not
sent to the GQ because the GQ Peer Probe Tracker (PPT) does not
have any available entries.
DRAM_OPEN.CH0
(Event 60H, Umask 01H) Counts number of DRAM Channel 0 open
commands issued either for read or write. To read or write data,
the referenced DRAM page must first be opened.
DRAM_OPEN.CH1
(Event 60H, Umask 02H) Counts number of DRAM Channel 1 open
commands issued either for read or write. To read or write data,
the referenced DRAM page must first be opened.
DRAM_OPEN.CH2
(Event 60H, Umask 04H) Counts number of DRAM Channel 2 open
commands issued either for read or write. To read or write data,
the referenced DRAM page must first be opened.
DRAM_PAGE_CLOSE.CH0
(Event 61H, Umask 01H) DRAM channel 0 command issued to CLOSE a
page due to page idle timer expiration. Closing a page is done
by issuing a precharge.
DRAM_PAGE_CLOSE.CH1
(Event 61H, Umask 02H) DRAM channel 1 command issued to CLOSE a
page due to page idle timer expiration. Closing a page is done
by issuing a precharge.
DRAM_PAGE_CLOSE.CH2
(Event 61H, Umask 04H) DRAM channel 2 command issued to CLOSE a
page due to page idle timer expiration. Closing a page is done
by issuing a precharge.
DRAM_PAGE_MISS.CH0
(Event 62H, Umask 01H) Counts the number of precharges (PRE) that
were issued to DRAM channel 0 because there was a page miss. A
page miss refers to a situation in which a page is currently open
and another page from the same bank needs to be opened. The new
page experiences a page miss. Closing of the old page is done by
issuing a precharge.
DRAM_PAGE_MISS.CH1
(Event 62H, Umask 02H) Counts the number of precharges (PRE) that
were issued to DRAM channel 1 because there was a page miss. A
page miss refers to a situation in which a page is currently open
and another page from the same bank needs to be opened. The new
page experiences a page miss. Closing of the old page is done by
issuing a precharge.
DRAM_PAGE_MISS.CH2
(Event 62H, Umask 04H) Counts the number of precharges (PRE) that
were issued to DRAM channel 2 because there was a page miss. A
page miss refers to a situation in which a page is currently open
and another page from the same bank needs to be opened. The new
page experiences a page miss. Closing of the old page is done by
issuing a precharge.
DRAM_READ_CAS.CH0
(Event 63H, Umask 01H) Counts the number of times a read CAS
command was issued on DRAM channel 0.
DRAM_READ_CAS.AUTOPRE_CH0
(Event 63H, Umask 02H) Counts the number of times a read CAS
command was issued on DRAM channel 0 where the command issued
used the auto-precharge (auto page close) mode.
DRAM_READ_CAS.CH1
(Event 63H, Umask 04H) Counts the number of times a read CAS
command was issued on DRAM channel 1.
DRAM_READ_CAS.AUTOPRE_CH1
(Event 63H, Umask 08H) Counts the number of times a read CAS
command was issued on DRAM channel 1 where the command issued
used the auto-precharge (auto page close) mode.
DRAM_READ_CAS.CH2
(Event 63H, Umask 10H) Counts the number of times a read CAS
command was issued on DRAM channel 2.
DRAM_READ_CAS.AUTOPRE_CH2
(Event 63H, Umask 20H) Counts the number of times a read CAS
command was issued on DRAM channel 2 where the command issued
used the auto-precharge (auto page close) mode.
DRAM_WRITE_CAS.CH0
(Event 64H, Umask 01H) Counts the number of times a write CAS
command was issued on DRAM channel 0.
DRAM_WRITE_CAS.AUTOPRE_CH0
(Event 64H, Umask 02H) Counts the number of times a write CAS
command was issued on DRAM channel 0 where the command issued
used the auto-precharge (auto page close) mode.
DRAM_WRITE_CAS.CH1
(Event 64H, Umask 04H) Counts the number of times a write CAS
command was issued on DRAM channel 1.
DRAM_WRITE_CAS.AUTOPRE_CH1
(Event 64H, Umask 08H) Counts the number of times a write CAS
command was issued on DRAM channel 1 where the command issued
used the auto-precharge (auto page close) mode.
DRAM_WRITE_CAS.CH2
(Event 64H, Umask 10H) Counts the number of times a write CAS
command was issued on DRAM channel 2.
DRAM_WRITE_CAS.AUTOPRE_CH2
(Event 64H, Umask 20H) Counts the number of times a write CAS
command was issued on DRAM channel 2 where the command issued
used the auto-precharge (auto page close) mode.
DRAM_REFRESH.CH0
(Event 65H, Umask 01H) Counts number of DRAM channel 0 refresh
commands. DRAM loses data content over time. In order to keep
correct data content, the data values have to be refreshed
periodically.
DRAM_REFRESH.CH1
(Event 65H, Umask 02H) Counts number of DRAM channel 1 refresh
commands. DRAM loses data content over time. In order to keep
correct data content, the data values have to be refreshed
periodically.
DRAM_REFRESH.CH2
(Event 65H, Umask 04H) Counts number of DRAM channel 2 refresh
commands. DRAM loses data content over time. In order to keep
correct data content, the data values have to be refreshed
periodically.
DRAM_PRE_ALL.CH0
(Event 66H, Umask 01H) Counts number of DRAM Channel 0 precharge-
all (PREALL) commands that close all open pages in a rank.
PREALL is issued when the DRAM needs to be refreshed or needs to
go into a power down mode.
DRAM_PRE_ALL.CH1
(Event 66H, Umask 02H) Counts number of DRAM Channel 1 precharge-
all (PREALL) commands that close all open pages in a rank.
PREALL is issued when the DRAM needs to be refreshed or needs to
go into a power down mode.
DRAM_PRE_ALL.CH2
(Event 66H, Umask 04H) Counts number of DRAM Channel 2 precharge-
all (PREALL) commands that close all open pages in a rank.
PREALL is issued when the DRAM needs to be refreshed or needs to
go into a power down mode.
DRAM_THERMAL_THROTTLED
(Event 67H, Umask 01H) Uncore cycles DRAM was throttled due to
its temperature being above the thermal throttling threshold.
THERMAL_THROTTLING_TEMP.CORE_0
(Event 80H, Umask 01H) Cycles that the PCU records that core 0 is
above the thermal throttling threshold temperature.
THERMAL_THROTTLING_TEMP.CORE_1
(Event 80H, Umask 02H) Cycles that the PCU records that core 1 is
above the thermal throttling threshold temperature.
THERMAL_THROTTLING_TEMP.CORE_2
(Event 80H, Umask 04H) Cycles that the PCU records that core 2 is
above the thermal throttling threshold temperature.
THERMAL_THROTTLING_TEMP.CORE_3
(Event 80H, Umask 08H) Cycles that the PCU records that core 3 is
above the thermal throttling threshold temperature.
THERMAL_THROTTLED_TEMP.CORE_0
(Event 81H, Umask 01H) Cycles that the PCU records that core 0 is
in the power throttled state due to cores temperature being above
the thermal throttling threshold.
THERMAL_THROTTLED_TEMP.CORE_1
(Event 81H, Umask 02H) Cycles that the PCU records that core 1 is
in the power throttled state due to cores temperature being above
the thermal throttling threshold.
THERMAL_THROTTLED_TEMP.CORE_2
(Event 81H, Umask 04H) Cycles that the PCU records that core 2 is
in the power throttled state due to cores temperature being above
the thermal throttling threshold.
THERMAL_THROTTLED_TEMP.CORE_3
(Event 81H, Umask 08H) Cycles that the PCU records that core 3 is
in the power throttled state due to cores temperature being above
the thermal throttling threshold.
PROCHOT_ASSERTION
(Event 82H, Umask 01H) Number of system assertions of PROCHOT
indicating the entire processor has exceeded the thermal limit.
THERMAL_THROTTLING_PROCHOT.CORE_0
(Event 83H, Umask 01H) Cycles that the PCU records that core 0 is
a low power state due to the system asserting PROCHOT the entire
processor has exceeded the thermal limit.
THERMAL_THROTTLING_PROCHOT.CORE_1
(Event 83H, Umask 02H) Cycles that the PCU records that core 1 is
a low power state due to the system asserting PROCHOT the entire
processor has exceeded the thermal limit.
THERMAL_THROTTLING_PROCHOT.CORE_2
(Event 83H, Umask 04H) Cycles that the PCU records that core 2 is
a low power state due to the system asserting PROCHOT the entire
processor has exceeded the thermal limit.
THERMAL_THROTTLING_PROCHOT.CORE_3
(Event 83H, Umask 08H) Cycles that the PCU records that core 3 is
a low power state due to the system asserting PROCHOT the entire
processor has exceeded the thermal limit.
TURBO_MODE.CORE_0
(Event 84H, Umask 01H) Uncore cycles that core 0 is operating in
turbo mode.
TURBO_MODE.CORE_1
(Event 84H, Umask 02H) Uncore cycles that core 1 is operating in
turbo mode.
TURBO_MODE.CORE_2
(Event 84H, Umask 04H) Uncore cycles that core 2 is operating in
turbo mode.
TURBO_MODE.CORE_3
(Event 84H, Umask 08H) Uncore cycles that core 3 is operating in
turbo mode.
CYCLES_UNHALTED_L3_FLL_ENABLE
(Event 85H, Umask 02H) Uncore cycles that at least one core is
unhalted and all L3 ways are enabled.
CYCLES_UNHALTED_L3_FLL_DISABLE
(Event 86H, Umask 01H) Uncore cycles that at least one core is
unhalted and all L3 ways are disabled.
SEE ALSO
pmc(3), pmc.atom(3), pmc.core(3), pmc.corei7(3), pmc.corei7uc(3),
pmc.iaf(3), pmc.k7(3), pmc.k8(3), pmc.soft(3), pmc.tsc(3), pmc.ucf(3),
pmc.westmere(3), pmc_cpuinfo(3), pmclog(3), hwpmc(4)
HISTORY
The pmc library first appeared in FreeBSD 6.0.
AUTHORS
The Performance Counters Library (libpmc, -lpmc) library was written by
Joseph Koshy <jkoshy@FreeBSD.org>.
FreeBSD 13.1-RELEASE-p6 March 24, 2010 FreeBSD 13.1-RELEASE-p6
man2web Home...